• Advances in concrete construction
• /
• 제16권1호
• /
• pp.59-68
• /
• 2023

In the pumping process, concrete moves along the pipe and experiences both pressure and shear. This changes the workability and flow characteristics of the concrete. However, the effect of pressure and shear on the change in properties of concrete during the pumping process has not yet been accurately identified. This study analyzed the effects of pressure and shear on the properties of concrete during pumping. For quantitative tests, lab-scale test equipment capable of simulating the pressure and shear applied to concrete during pumping was used. For one coarse aggregate type, two paste types, three mortar types, and five concrete types, the effects of pressure, shear, and shear under pressure conditions were examined by varying the maximum pressure (0 to 200 bar) and the rotational speed of the vane for shear (0 to 180 rpm). Under the maximum pressure condition of 200 bar, the water absorption of coarse aggregate increased by 0.62% and that of fine aggregate also increased. When the concrete was under pressure, significant changes (a reduction in a slump and an increase in viscosity and yield stress) compared with the effect of the elapsed time occurred owing to an increase in the water absorption of the aggregates. When both pressure and shear were applied to concrete, both the slump and viscosity decreased. As the rotational speed of the vane increased, changes in properties became significant. Shearing in the absence of pressure maintained the properties of concrete. However, shearing under pressure conditions caused a reduction in slump and viscosity.

• 한국간담췌외과학회지
• /
• 제28권2호
• /
• pp.248-261
• /
• 2024

Backgrounds/Aims: This study aimed to investigate patterns and factors affecting recurrence after curative resection for pancreatic ductal adenocarcinoma (PDAC). Methods: Consecutive patients who underwent curative resection for PDAC (2011-21) and consented to data and tissue collection (Barts Pancreas Tissue Bank) were followed up until May 2023. Clinico-pathological variables were analysed using Cox proportional hazards model. Results: Of 91 people (42 males [46%]; median age, 71 years [range, 43-86 years]) with a median follow-up of 51 months (95% confidence intervals [CIs], 40-61 months), the recurrence rate was 72.5% (n = 66; 12 loco-regional alone, 11 liver alone, 5 lung alone, 3 peritoneal alone, 29 simultaneous loco-regional and distant metastases, and 6 multi-focal distant metastases at first recurrence diagnosis). The median time to recurrence was 8.5 months (95% CI, 6.6-10.5 months). Median survival after recurrence was 5.8 months (95% CI, 4.2-7.3 months). Stratification by recurrence location revealed significant differences in time to recurrence between loco-regional only recurrence (median, 13.6 months; 95% CI, 11.7-15.5 months) and simultaneous loco-regional with distant recurrence (median, 7.5 months; 95% CI, 4.6-10.4 months; p = 0.02, pairwise log-rank test). Significant predictors for recurrence were systemic inflammation index (SII) ≥ 500 (hazard ratio [HR], 4.5; 95% CI, 1.4-14.3), lymph node ratio ≥ 0.33 (HR, 2.8; 95% CI, 1.4-5.8), and adjuvant chemotherapy (HR, 0.4; 95% CI, 0.2-0.7). Conclusions: Timing to loco-regional only recurrence was significantly longer than simultaneous loco-regional with distant recurrence. Significant predictors for recurrence were SII, lymph node ration, and adjuvant chemotherapy.

• 설비공학논문집
• /
• 제22권3호
• /
• pp.139-148
• /
• 2010

A centrifugal compressor for HFC-134a has been newly designed and developed. Flow analysis using commercial programs was used to evaluate performance and internal flow of the impeller, inlet guide vane and diffuser etc. The purpose of this study is to establish the design theory necessary to the development of HFC-134a centrifugal compressors and to supply basic data related to design by reviewing design values and experimental values through the performance test. The compressor for HFC-134a was also investigated experimentally to check compression performance. The calculated data coincide the test results of compressor. The data obtained in the present study are useful for design of HFC-134a centrifugal compressors.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.910-915
• /
• 2005

In this study a series of tests(bench scale test) are carried out for increasing in strength of clayey soil by EK-Injection method. In addition, the effects of strength increase in the treated sample are measured by operating the vane shear test device during 25 days at 5 days intervals in order to estimate the effect of ground improvement caused by diffusion. The test results show that the strength increase was developed approximately double to 7 times in comparison to initial shear strength, and outstanding strength increase was created as much as 7 times while injecting the sodium silicate and phosphoric acid in anolyte and catholyte. In addition, the measured shear strength with the influence of diffusion and reduction of water-content had a tendency to converge in constant value in proportion to elapsed time. As a result of this study, strength increment developed by the influence of EK-Injection and diffusion rather than the reduction of water-content were high as 1000% on average

• 한국방재학회 논문집
• /
• 제4권3호
• /
• pp.25-31
• /
• 2004

철도사면은 예상치 못한 연약지반의 존재로 인해 붕괴될 수 있다. 이 연구는 철도사면의 파괴원인을 규명하고 대책공법 적용을 위한 강도정수를 결정하는데 그 목적이 있다. 사면파괴의 원인을 파악하기 위하여 시추조사, 콘관입시험, 현장베인시험 등이 수행되었다. 또한 연약지반의 강도정수를 구하기 위해 불교란상태로 시료를 채취하여 실내시험을 수행하였다. 현장원위치시험 및 실내시험 결과 사면 파괴의 원인은 과압밀점토의 점진적 파괴에 따른 연약지반 강도저하영역의 전파에 기인한 것으로 밝혀졌다.

• Nuclear Engineering and Technology
• /
• 제41권4호
• /
• pp.493-520
• /
• 2009

During the last four decades, 16 Pressurized Water Reactors (PWR) and 4 Pressurized Heavy Water Reactors (PHWR) have been constructed and operated in Korea, and nuclear fuel technology has been developed to a self-reliant state. At first, the PWR fuel design and manufacturing technology was acquired through international cooperation with a foreign partner. Then, the PWR fuel R&D by Korea Atomic Energy Research Institute (KAERI) has improved fuel technology to a self-reliant state in terms of fuel elements, which includes a new cladding material, a large-grained $UO_2$ pellet, a high performance spacer grid, a fuel rod performance code, and fuel assembly test facility. The MOX fuel performance analysis code was developed and validated using the in-reactor test data. MOX fuel test rods were fabricated and their irradiation test was completed by an international program. At the same time, the PWR fuel development by Korea Nuclear Fuel (KNF) has produced new fuel assemblies such as PLUS7 and ACE7. During this process, the design and test technology of fuel assemblies was developed to a self-reliant state. The PHWR fuel manufacturing technology was developed and manufacturing facility was set up by KAERI, independently from the foreign technology. Then, the advanced PHWR fuel, CANFLEX(CANDU Flexible Fuelling), was developed, and an irradiation test was completed in a PHWR. The development of the CANFLEX fuel included a new design of fuel rods and bundles.. The nuclear fuel technology in Korea has been steadily developed in many national R&D programs, and this advanced fuel technology is expected to contribute to a worldwide nuclear renaissance that can create solutions to global warming.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.309-316
• /
• 2000

When highly compressible, clayey soil layers lies at a limited depth and large consolidtion settlements are expected as the result of construction, precompression of soil may be used to minimize postconstruction settlement. In this study, we tried to find the possibility about the effect of ground improvement using flat dilatometer at the Inchon International Airport where preloading was installed. Field and laboratory tests were performed for soft ground before and after preloading in order to check the effectiveness of the soft ground improvement and compared with the test results of dilatometer which obtained before and after preloading at the same location Field tests such as flat dilatometer, vane, CPTu tests were performed before and after preloading and undisturbed samples are obtained to carry out laboratory tests. As comparing results, after preloading, unit weight, effective stress, undrained shear strength were increased and we can also check the decrease of consolidation late caused of decrease of void ratio. Furthermore, it is assumed that the possibility on the effect of ground improvement by using the flat dilatometer

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.183-190
• /
• 1998

This paper introduces the part of efforts to develop a derivative type turbo-shaft engine from an existing baseline engine for multi-purpose helicopters targeting at 4000kg of take-off weight for 10-12 passengers. As a first step in meeting the development goal of increasing the output power to 840hp from 720hp with minimum modification, two stage axial compressor was redesigned to obtain the higher pressure ratio by removing the inlet guide vane and increasing the chord length. As a result, two stage axial compressors were designed to have the flow rate of 3.04 kg/s, the pressure ratio of 2.01 and the adiabatic efficiency of $85\%$. Its performance tests were carried out and verification of test results and redesign are under progress. Aerodynamic and structural analyses of the preliminary design are mainly described in this paper.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.676-685
• /
• 1993

A mathematical model was developed to quantify the separation process of threshed grain-straw mixtures. It was made to predict the separation loss from a separation unit consisted of stationary crimped sieve with rotating inner rotor. Experiments were performed to prove the mathematical model by changing various levels of pertinent variables for rice. Good Agreement between the simulated results and observed data under the various test conditions, such as inclination angle of the separator, vane pitch, rotor speed, MOG/G ratio, feed rate, and crop variety and moisture content, were confirmed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1998년도 제11회 학술강연회논문집
• /
• pp.31-31
• /
• 1998

제트베인을 이용한 추력방향 제어장치를 개발하여 평균추력 2950 lbf, 평균 압력 714 psig, 연소시간 4.8초, 노즐 출구직경 약 100mm인 추진기관에 장착하고 이를 시험하고 분석하였다. 재질에 따른 제트베인의 삭마성을 알아보기 위하여 텅스텐과 구리(W/Cu), 지르코늄산화물과 텅스텐(ZrO$_2$/W), 지르코늄 산화물과 몰리브덴(ZrO$_2$/Mo)의 3가지 재질의 베인을 사용하였다 시험된 제트베인 재질 중 지르코늄 산화물과 몰리브덴(ZrO$_2$/Mo)의 합금을 사용한 베인이 내열성 및 삭마성에서 가장 우수하였으며(삭마량 27.65% 삭마율 5.7mm/sec), 지르코늄 산화물과 텅스텐(ZrO$_2$/W), 텅스텐과 구리(W/Cu)의 순서이었다.