• Journal of Advanced Marine Engineering and Technology
• /
• 제35권6호
• /
• pp.757-764
• /
• 2011

본 연구에서는 폐열회수 발전시스템에 적용가능한 100kW급 구심터빈을 대상으로 베인노즐의 출구각도 변화에 따른 구심터빈의 성능과 내부유동의 영향을 분석하였다. 이를 위해 상용코드를 이용한 3차원 CFD 해석을 수행하였다. 베인노즐 출구각이 커짐에 따라 블레이드 근처 재순환영역은 점차 작아 졌으며, 또한 단면축소효과로 인해 베인노즐 출구끝단 마하수는 1까지 관찰되었다. 본 연구를 통해 분석된 해석결과는 목표출력용 구심터빈의 최적 설계파라미터 구성을 위한 설계자료로 유용하게 활용될 것으로 기대된다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권2호
• /
• pp.137-142
• /
• 2016

Variable Geometry System (VGS) is widely applied to the nozzle vane for the radial inflow turbine constituting automotive turbochargers for the purpose of optimizing the power output at each operating condition. In order to improve the performance of radial turbines with VGS, it is necessary to clarify the influences of the setting angle of nozzle vane on the internal flow of radial turbine. However, the experimental measurements are considered to be difficult for the flow in radial turbines because of the small size and the high rotational speed. In the present study, the numerical calculations were carried out for the flow in the radial turbine at three operating conditions by applying the corresponding nozzle vane exit angles, which were set up in the experimental study, as the inlet boundary condition. The numerical results revealed the characteristic flow behaviors at each operating condition.

• 한국추진공학회지
• /
• 제16권2호
• /
• pp.34-41
• /
• 2012

추력편향장치는 일반적으로 노즐 뒤에 장착되어 추진기관에서 분사되는 초음속 제트의 유동방향 자체를 편향시킴으로 단일 추진체의 노즐에서 종축, 횡축, 회전축 방향의 제어를 할 수 있다. 노즐 유동장내에 노출되어 있는 편향장치인 제트 베인의 경우 그 형상과 편향각도에 따라서 상호 유동 간섭에 의한 추력손실이 발생되게 된다. 본 연구에서는 실험에 사용된 노즐의 수치해석과 더불어 제트 베인 각도 변화에 따른 공기역학적 유동가시화를 수행하였으며 베인에 미치는 유동간섭의 특징을 분석하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.201-202
• /
• 2012

The isothermal flow structure and mixing characteristics of a hybrid/dual swirl jet combustor for micro-gas turbine were numerically investigated. Location of pilot nozzle, angle and direction of swirl vane were varied as main parameters with constant fuel flow rates for each nozzle. As a result, the variation in location of pilot nozzle resulted in significant change in turbulent flow field near burner exit, in particular, center toroidal recirculation zone (CTRZ) as well as turbulent intensity, and thus flame stability and emission characteristics might be significantly changed. The swirl angle of $45^{\circ}$ provided similar recirculating flow patterns in a wide range of equivalence ratio (0.5~1.0). Compared to the co-swirl flow, the counter-swirl flow leaded to the reduction in CTRZ and fuel-air mixing near the burner exit and a weak interaction between the pilot partially premixed flame and the lean premixed flame. With the comparison of experimental results, it was confirmed that the case of co-swirl flow and swirl $angle=45^{\circ}$ would provided an optimized combustor performance in terms of flame stability and pollutant emissions.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.199-200
• /
• 2012

An experimental study on geometric optimization was conducted to develop a hybrid/dual swirl jet combustor for a micro-gas turbine. A hybrid concept indicating a combination of swirling jet partially premixed and premixed flames were adopted to achieve high flame stability as well as clean combustion. Location of pilot nozzle, angle and direction of swirl vane were varied as main parameters with a constant fuel flow rate for each nozzle. The results showed that the variation in location of pilot nozzle resulted in significant change in swirl intensity due to the change in flow area near burner exit, and thus, optimized nozzle location was determined on the basis of CO and NOx emissions under conditions of co-swirl flow and swirl $angle=30^{\circ}$. The increase in swirl angle (from $30^{\circ}$ to $45^{\circ}$) enhanced the emission performances, in particular, with a significant reduction of CO emission near lean-flammability limit. It was observed that the CO emission near lean-flammability limit was further reduced through the counter-swirl flow. However, there was not significant change in the NOx emission in the operating conditions (i.e. equivalence ratio of 0.6~0.7) between the co- and the counter-swirl flow.

• 설비공학논문집
• /
• 제1권2호
• /
• pp.107-115
• /
• 1989

The swirl flame was investigated experimentally by measuring the temperature distribution, and the combustion gas concentrations. The flame structure of the swirl flame was influenced not by the swirl vane angle but by the swirler position. Due to the momentum loss as the swirler position was moved downward under the nozzle exit, the flame length was increased. Meanwhile the temperature and $CO_2$-concentrations were decreased.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.57-64
• /
• 2002

This paper describes the results of a series of experiments executed by using two pilot-scale oxv-fuel burners are designed for maximum capacity of 50,000 kacl/hr, 300,000 kcal/hr and installed in the test furnace. The effects of turn-down ratio, excess oxygen ratio, nozzle exit velocity, injection angle, swirl vane angle and inlet oxygen temperature on the combustion characteristic are investigated. Temperature distributions are measured using R-type and Molybdenum sheathed C-type thermocouple. The results showed that maximum temperature and mean temperature increase with the increase of turn-down ratio and inlet oxygen temperature. The maximum flame temperature was increased about 35% compared to the case of equivalent air operated condition. In addition, Optimum excess oxygen ratio and nozzle characteristics are obtained for this oxy-fuel glass melting furnace.

• 한국연소학회지
• /
• 제9권1호
• /
• pp.1-10
• /
• 2004

The results of a series of experiments executed by using two pilot-scale oxy-fuel burners are presented. The oxy-fuel burners are designed for maximum capacity of 50,000kcal/hr, 200,000kcal/hr and installed in the test furnace. The effects of turn-down ratio, excess oxygen ratio, nozzle exit velocity, injection angle, and swirl vane angle on the combustion characteristic are investigated. Temperature distributions are measured using R-type and Molybdenum sheathed C-type thermocouple at various points of the flame. The results showed that maximum temperature and mean temperature increase with the increase of turn-down ratio and momentum. The maximum flame temperature was increased about 35% compared to the case of equivalent air operated condition. In addition, optimum burner type, excess oxygen ratio and nozzle characteristics are obtained for this oxy-fuel glass melting furnace.

• 한국추진공학회지
• /
• 제17권5호
• /
• pp.60-69
• /
• 2013

마이크로 가스터빈용 하이브리드/이중 선회 제트 연소기의 형상 최적화에 대한 실험연구가 수행되었다. 고정된 열부하에서 pilot 버너의 위치 및 선회기 베인의 방향이 주요 변수로 검토되었다. 주요 결과로서, pilot 버너 및 연료 노즐의 위치변화는 버너 출구 근처의 최소 유동면적 및 재순환 유동패턴의 변화를 발생시키며, 이로 인하여 선회강도 및 화염형상이 큰 영향을 받게 된다. 선회기 베인 각도의 증가($30^{\circ}$에서 $45^{\circ}$)는 희박가연한계 근처에서 CO 배출량을 크게 저감시킨다. 추가로 정방향 선회형상이 역방향 선회형상에 비해 보다 낮은 CO 및 NOx 배출량을 갖게 됨을 확인하였다.