• 한국정보전자통신기술학회논문지
• /
• 제15권5호
• /
• pp.349-359
• /
• 2022

본 연구는 자동 조향 트랙터용 비례제어밸브의 국산화를 위한 기초연구로써 다양한 트랙터 조향 조건에 따른 조향 비례제어밸브 동특성 계측 및 분석을 위해 수행되었다. 동특성 데이터는 유량 및 압력 계측 시스템을 통해 수집되었으며, 수집된 유량 및 압력 데이터를 이용하여 동력을 분석하였다. 실험 조건은 트랙터 엔진 회전속도와 조향각을 주요 변수로 선정하였으며, 실험은 우레탄 노면 조건에서 수행되었다. 그 결과, 트랙터 엔진 회전속도 및 조향각이 증가함에 따라 비례제어밸브 유량, 압력, 동력이 모두 증가하는 것으로 나타났다. 특히, 동일한 엔진회전속도에서 조향각이 증가함에 따라, 유량, 압력, 동력은 각각 최대 190%, 172%, 273% 증가하는 경향을 보였으며, 동일한 조향각에서 엔진회전속도가 증가함에 따라, 유량, 압력, 동력은 각각 최대 161%, 122%, 168% 증가하는 경향을 보였다. 이를 통해, 조향각이 엔진 회전속도보다 비례제어밸브의 동특성에 더 높은 영향을 미치는 것을 확인하였다.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.4937-4943
• /
• 2012

버터플라이 밸브는 다른 밸브에 비해 작동의 용이성으로 각종 산업에서 유량 조절을 목적으로 많이 활용되고 있다. 버터플라이 밸브를 통과하는 유량을 제어하기 위해서는 디스크 각에 따른 용량계수에 따라 유량을 제어하게 된다. 본 논문에서는 고품질 밸브 제작을 위해 성능 지표 중에 하나인 용량계수를 기존의 제품의 3D 모델을 이용하여 유동 해석 및 분석을 수행하였고 이를 검증하기 위해 용량계수 측정 장비 측정을 통해 해석의 신뢰성을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제27권2호
• /
• pp.79-88
• /
• 2002

This study was conducted to develop system for high speed rice transplanting machines. The control system includes a sensor detecting the tilt angle of the seedling bed, a micro-controller and a hydraulic system consisting of a double acting cylinder, a four-way three-position solenoid valve, a relief valve and a hydraulic pump. The levelling system shared the pump with the existing steering control, resulting in a tandem center circuit for the steering and levelling control systems. Using the input signal from the sensor, the micro-controller determined and generated the output signal to control the cylinder through the solenoid valve to keep the seedling bed always parallel to the water surface regardless of soil unevenness during the transplanting operations. Both an ON/OFF and a PWM control schemes were tested. When the flow rate was more than 1 ι/min in the ON/OFF control, the system showed unstable rolling. However, in the PWM control, the system worked stably although the flow rate was more than 1 ι/min. The PWM control showed a better performance when a large difference between the angle and the dead band of the control system occurred. The characteristics of tile system response to given tilt angles were predicted by a computer simulation. Both the ON/OFF and the PWM control systems worked well providing that the operating and waiting times were properly adjusted.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.91-98
• /
• 1999

This paper describes the air flow characteristics inside the throttle valve. Tow-dimensional steady incompressible Navier-Strokes equation are solved numerically with embedding the conceopt of the artificial compressibility and adopting the Baldwin-Lomax turbulence model. With varying the valve opening angles(the Reynolds number )such as 15$^{\circ}$(5000) , 45$^{\circ}$(3000) , 75$^{\circ}$(7000) and 90$^{\circ}$(10000), respectively. tow cases, with a valve shaft and without one, are analysed. The pressure loss between the entrance and exit is severe at 15$^{\circ}$, 100 times as larger as that of 90$^{\circ}$ case, which also depends much on the existece of the valve shaft. The counter rotating vortices are formed over the valve plate with the shaft at only 75$^{\circ}$. They are smally and very large scale in front and back of the valve shaft , respectively. The velocity profiles of 15$^{\circ}$ and 90$^{\circ}$ at the exit are almost symmetric to the horizontal center line, however, the symmetricity is no longer maintained at 45$^{\circ}$ and 75$^{\circ}$ , and in addition, the flow at 75$^{\circ}$ is enforced a lot below center line. The pressure distribution on the walls is largely changed near the valve shaft, and its magnitude becomes great as the valve angle decreases.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.1-10
• /
• 2018

Spool displacement of a direction control valve is the standard signal to measure the bandwidth frequency of the direction control valve. When the spool displacement signal is not available, it is suggested in this study to use the metering hydraulic line as an alternative way to measure - 90 degree phase bandwidth frequency of the hydraulic direction control valve. Dynamics of the hydraulic line is composed of inertia, capacitance, and friction effects. The effect of oil inertia is dominant in common hydraulic line dynamics and the line dynamics is close to a derivative action in a range of high frequency; such as a range of bandwidth frequency of common directional control valves. Phase difference between spool displacement and line load pressure is nearly constant as a valve close to 90 degree. If phase difference is compensated from the phase between valve input and pressure, compensated phase may be almost same as the phase of spool displacement that is a standard signal to measure phase bandwidth frequency of the directional control valve. A series of experiments were conducted to examine the possibility of using line pressure in to measure phase bandwidth frequency of a directional control valve. Phase bandwidth frequency could be measured with relatively high precision based on metering hydraulic line technique and it reveals consistent results even when valve input, oil temperature, and supply pressure change.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.82-88
• /
• 1999

The object of this study is to find new evaluation index for in-cylinder flow chracteristics istead of current swirl, tumble coefficient using steady flow test rig on intake port system. To this end, port flow system. To this end, port flow rig test was conducted on DOHC head varying intake valve lift respectively. Finally combination angular coefficient and inclination angle were introduced as new evaluation index for in-cylinder angularflow characteristics instead of swirl and tumble coefficient.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.20-26
• /
• 1997

A System for reducing vehicle body roll by active control is developed. The stabilizer bar with hydraulic rotary actuator produces anti-roll moment which suppresses roll tendency. This reduction of roll improves the driving safety as well as the ride comfort. Vehicle test data shows considerable reduction of roll angle during steady-state turning. Also improvement of ride comfort is achieved by making the actuator freely rotatable, i.e. by connecting all chambers of actuator in normal driving conditions. A control algorithm using steering wheel angle and vehicle speed signal as input valve is applied. It is compared with signal of the G-sensor.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.66-75
• /
• 1999

Many researchers have developed the measurement technique of in-cylinder flow. Recently, there are lots of studies on steady flow with different SCV geometries. In this study the flow characteristics of four-valve cylinder head were examined in a steady test rig for different SCV open ratios. Each swirl ratio of several SCV angle was quantified by swirl impulse meter and 2D-LDV measurement. The results showed that the swirl ratio was controlled between 2.3 and 3.8 based on SCV angles. The velocity distributions of in-cylinder flow field were measured by 2-D LDV test and visualized swirl and tumble flow pattern at different positions. In this engine , we found out that the swirl was dominant flow.

• 한국응용과학기술학회지
• /
• 제21권2호
• /
• pp.164-173
• /
• 2004

The capacity and long life of gel electrolyte batteries is connected with gas recombination producting $PbO_2$ and Pb electrode. We prepared with sulfuric acid gel electrolyte to know gel characteristics per density to assemble valve regulated lead-acid (VRLA) batteries. We studied on actions of sulphuric acid gel electrolyte by measuring electrolyte dispersion using Brewster-angle microscope (BAM), charge-discharge cycle, and electrode structure using scanning election microscope (SEM). Sulphuric acid density 1.210 showed excellent gel dispersion in sol condition, electrode condition after fifty cycles in this study.

• Tribology and Lubricants
• /
• 제16권4호
• /
• pp.289-294
• /
• 2000

This paper present the contact stresses, which considers the shear stress at the cam and follower interface in the direct acting type valve train system of a high speed engine. To determine the contact condition, the normal contact forces are calculated by using the lumped mass dynamic modeling. The line contact is considered between the cam and follower interface. The variations of dynamic stresses are presented as a function of camshaft rotational angle. Also the effects of various design parameters are investigated.