• Fire Science and Engineering
• /
• v.26 no.4
• /
• pp.70-76
• /
• 2012

This paper deal with vehicle fire caused by damage of diesel particulate filter (DPF) on diesel passenger vehicles. In order to reduce particulate matters included exhaust gases, a DPF in the exhaust system were installed diesel vehicles. A DPF was broken by excessively trapped particulate matters, regeneration error with a malfunction of ECU and defect of suction system such as swirl valve. If the DPF was broken, hot exhaust gases was released to the bottom of vehicle and released hot exhaust gases lead to occur the fire through combustible materials around the exhaust system. When a fire happened in the diesel vehicle caused by damage of DPF, silicate inorganic compounds were attached to the exhaust ventilation pipe and muffler. The silicate inorganic compounds were created by DPF combustion consisting of raw material ceramics. If the silicate inorganic compounds attached to the tail pipe in the diesel passenger vehicles, its fire cause will be assumed damage of DPF.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.512-518
• /
• 2022

In this study, safety devices for ammonia tanks of a company in Ulsan petrochemical industrial complex were studied. The type of a tank is cylindrical and this tank was originally designed to store propylene in 1972. Due to the changes of the production schedule according to market environments, the usage of this tank has been changed to store ammonia. Despite of the changes of materials, there is no scientific information or reviews for guaranteeing the safety. Therefore, in this study, the current status of this tank is investigated to confirm that the operational conditions are complying with safety conditions. Moreover, the safety devices such as an ammonia absorbing system and water curtains are analyzed how they mitigate the impact of an accident. In addition, consequence analysis is performed to provide a proper emergency response plan. Throughout these analysis, it is confirmed that installed safety devices effectively mitigate the impact of accidents, and the necessary time for an emergency response plan is suggested when ammonia release.

• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.3
• /
• pp.121-129
• /
• 2022

Recently the growth of the renewable energy production has caused the flexible operation in LNG combined cycle power plant. Due to the rapid start and stop operations, large CrMoV castings used for turbine casings and valve bodies could be distorted and lead to replacement or welding repair. This study was performed to find out the characteristics of the repair welding for a damaged CrMoV casting steel. A typical field repair method (arc & TIG welding) was applied to making specimens. The degraded N2 packing head sample from the steam turbine was used. The evaluations of weldments were carried out in terms of microstructural characterization, microhardness measurements, tensile, creep-rupture and fatigue tests. Color etching was also applied for better understanding of welding microstructures. As the boundary between HAZ and base material was deteriorated by welding, it caused microstructural changes formed during PWHT and the shortening of the remaining residual life. By comparing the properties according to repair welding method, it was possible to derive what important welding factors were. As a result, arc welding method is more suitable for repair welding on CrMoV castings.

• Korean Journal of Radiology
• /
• v.23 no.10
• /
• pp.998-1008
• /
• 2022

Objective: The present study aimed to assess the relationship between incidental abnormalities on thoracic computed tomography (CT) and mortality in a general screening population using a long-term follow-up analysis. Materials and Methods: We retrospectively collected the medical records and CT images of 840 participants (mean age ± standard deviation [SD], 58.5 ± 6.7 years; 564 male) who underwent thoracic CT at a single health promotion center between 2007 and 2010. Two thoracic radiologists independently reviewed all CT images and evaluated any incidental abnormalities (interstitial lung abnormality [ILA], emphysema, coronary artery calcification [CAC], aortic valve [AV] calcification, and pulmonary nodules). Kaplan-Meier analysis with log-rank and z-tests was performed to assess the relationship between incidental CT abnormalities and all-cause mortality in the subsequent follow-up. Cox proportional hazards regression was performed to further identify risk factors of all-cause mortality among the incidental CT abnormalities and clinical factors. Results: Among the 840 participants, 55 (6%), 171 (20%), 288 (34%), 396 (47%), and 97 (11%) had findings of ILA, emphysema, CAC, pulmonary nodule, and AV calcification, respectively, on initial CT. The participants were followed up for a mean period ± SD of 10.9 ± 1.4 years. All incidental CT abnormalities were associated with all-cause mortality in univariable analysis (p < 0.05). However, multivariable analysis further revealed fibrotic ILA as an independent risk factor for all-cause mortality (hazard ratio, 2.52 [95% confidence interval, 1.02-6.22], p = 0.046). ILA were also identified as an independent risk factor for lung cancer or respiratory disease-related deaths. Conclusion: Incidental abnormalities on screening thoracic CT were associated with increased mortality during the long-term follow-up. Among incidental CT abnormalities, fibrotic ILA were independently associated with increased mortality. Appropriate management and surveillance may be required for patients with fibrotic ILA on thoracic CT obtained for general screening purposes.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.93-103
• /
• 1981

It is well-known that nowadays heat resisting and anti-corrosive materials have been widely used as the components materials of gas turbines, nuclear power plants and engines etc. In the fields of machine production industry. And materials for engine components, like as the exhaust valve of internal combustion engine, have been required to operate under the high temperature range of $700^{\circ}C$-$800^{\circ}C$ and high pressured gas with repeated mechanical load for the high performance of engines. For these components, friction welding for bonding of dissimilar steels can be applied for in order to obtain process shortening, production cost reduction and excellent bonding quality. And age hardening recently has been noticed to the heat resisting materials for further strengthening of high temperature strength, especially high temperature fatigue strength. However, it is difficult to find out any report concerning the effects of age hardening for strengthening high temperature fatigue strength to the Friction welded heat resisting and anti-corrosive materials. In this study the experiment was carried out as the high temperature rotary bending fatigue testing under the condition of $700^{\circ}C$ high temperature to the friction welded domestic heat resisting steels, SUH3-SUS303, which were 10hr., 100hr. aging heat treated at $700^{\circ}C$ after solution treatment 1hr. at $1, 060^{\circ}C$ for the purpose of observing the effects of the high temperature fatigue strength and fatigue fracture behaviors as well as with various mechanical properties of welded joints. The results obtained are summarized as follows: 1) Through mechanical tests and micro-structural examinations, the determined optimum welding conditions, rotating speed 2420 rpm, heating pressure 8kg/mm super(2), upsetting pressure 22kg/mm super(2), the amount of total upset 7mm (heating time 3 sec and upsetting time 2 sec) were satisfied. 2) The solution treated material SUH 3, SUS 303, have the highest inclination gradient on S-N curve due to the high temperature fatigue testing for long time at $700^{\circ}C$. 3) The optimum aging time of friction welded SUH3-SUS 303, has been recognized near the 10hr. at $700^{\circ}C$ after the solution treatment of 1hr. at $1, 060^{\circ}C$. 4) The high temperature fatigue limits of aging treated materials were compared with those of raw material according to the extender of aging time, on 10hr. aging, fatigue limits were increased by SUH 3 75.4%, SUS 303 28.5%, friction welded joints SUH 3-SUS 303 44.2% and 100hr. aging the rates were 64.9%, 30.4% and 36.6% respectively. 5) The fatigue fractures occurred at the side of the base matal SUS303 of the friction welded joints SUH 3-SUS 303 and it is difficult to find out fractures at the friction welding interfaces. 6) The cracking mode of SUS 303, SUH 3-303 is intergranular in any case, but SUH 3 is fractured by transgranular cracking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.688-694
• /
• 2018

The mixture ratio of two-component liquid silicone is important for the inherent physical characteristics of the finished product. Therefore, it is necessary to uniformly control the ratio of the main material and the sub-material. In this paper, a mixing-ratio control system was designed, which consists of a digital flow meter and a flow control system to measure the flow rate of the raw materials and a pumping system to maintain constant pressure and transfer of the raw materials. In addition, a program was developed to control the organic interlocking and mixing ratio. For the verification of the developed system, we compared the actual weight of raw material with the value measured by the flow meter during pumping, and we measured the physical properties of the mixed material by making test samples with and without the application of the mixing-ratio improvement algorithm. The measured value was close to the reference value with a hardness range of 46-47 and tensile strength of 9.3-9.5 MPa. These results show that the mixing ratio of the liquid silicone is controlled within an error range of ${\pm}0.5%$.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.177-180
• /
• 2010

Purpose: As PET test came to be covered by the pay system of medical insurance (July 1, 2006) and the needs for it becoming increased for laboratory purpose, it became necessary to purchase expensive medical equipments to solve those problems. However, as most of equipments that are operated by cyclotron are very expensive as to amount from tens of millions up to hundreds of millions of won, it is difficult to purchase those equipments from the point of medical organizations. It may be possible to self manufacture those equipments with least costs if their parts functions that meets the operators demands. The Nuclear Medicine department of National Cancer Center (NCC) is trying to manufacture and use equipments that can be made with least costs, including introducing 2 medical equipments that can improves the operator's works. Materials and Methods: Example 1: Self production of radioisotope($^{18}F$) divider was fabricated. The NCC's Nuclear Medicine department acquired one acrylic panel, seven 3-way valve, tubing etc. that can be found in the market to make the main body of divider in cooperation with biomedical engineering, and placed them inside hot cell, and installed switching box outside of hot cell to make it possible to control them from outside. This main body of divider were placed in radioisotope transfer line that are manufactured in the cyclotron. Example 2: Self production of $^{18}F$-FDG automated divider was fabricated. The NCC's Nuclear Medicine department used cavro pump syringe that consists the main body of divider in cooperation with biomedical engineering, biomedical engineering developed programs that divides a certain amount. $^{18}F$-FDG automated divider is placed inside hot cell, and cable chords were used in the equipment, and then it was connected to PC outside hot cell to make it possible to control the $^{18}F$-FDG automated divider. Results: From the NCC's Nuclear Medicine department tests that were carried out from March, 2007 until now, we found out that radioisotope can be sent to radiopharmaceuticals composite module we want, and from the tests that are carried out at NCC's Nuclear Medicine department using $^{18}F$-FDG automated divider since August, 2009 it was possible to distribute radiopharmaceuticals into vial intended. Conclusion: Through the two examples above, we found out that costs can be reduced by self manufacturing expensive equipments from NCC's cyclotron room with least costs. Also, it decreased radiation exposure dose on workers, and set up problem solving processes in cooperation with lots of parties related.

• Journal of Chest Surgery
• /
• v.35 no.12
• /
• pp.854-861
• /
• 2002

In this study, we reviewed our early and long-term surgical results of complete atrioventricular septal defect during the last 16 years at our hospital. Materials and Methods: Between April 1986 and March 2002, 73 patients with complete atrioventricular septal defect underwent total correction without preceding palliation. Age at repair ranged from 2 to 85 (median age, 7) months, and weight ranged from 3 to 22 (median weight, 5.9)kg. Follow-up was complete with a mean duration of 69$\pm$51 months. Results: Overall operative mortality was 16.4%(12) with 3 late deaths. One, 5, and 10 year actuarial survival rates were 96.3 %, 94.2 % and 94.2 % respectively Sixteen of 61 (22.2%) operative survivors have undergone reoperation for postoperative mitral regurgitation or left ventricular outflow tract obstruction (LVOTO). Freedom from mitral reoperation at 1, 5, and 10 years were 87.8 %, 72.4 %, and 57.8 % and freedom from LVOTO at 1, 5, and 10 years were 98.2 %, 86.3 %, and 83.2 % respectively. Summary: In this study, we found that our early surgical results improved with quite an acceptable long-term outcome. Close observation of remaining mitral regurgitation was necessary, A precise evaluation of the atrioventricular valve morphology, a meticulous surgical technique, and the adequate postoperative management are mandatory for the excellent results.

• Journal of Chest Surgery
• /
• v.31 no.11
• /
• pp.1049-1055
• /
• 1998

Background: Coronary artery bypass surgery is an important treatment for ischemic heart disease. Recently operative mortality and morbidity has decreased, however further improvement is necessary. Materials and methods: This study was designed to evaluate the risk of operative mortality and morbidity by retrospective method. From 1992 to 1997, eighty six patients underwent coronary artery bypass surgery. There were 61 males and 25 females aged 36~74 years(mean, 58.6). Fourteen patients(16%) had previous PTCA or stent insertion, 41 patients(48%) had unstable angina, and 45 patients(52%) had three vessel disease. Patients with low LV ejection fraction(<35%) were 7 cases and urgent or emergent operation were 10 cases. There were 6 cases of combined surgery which were mitral valve replacement(2 cases), aortic valve replacement(2 cases), ASD repair(1 case), and VSD repair(1 case). Average number of distal anastomosis was 3.5 per patient and average aortic cross clamp time was 115±38.3min. Preoperative risk factors were defined as follows: female, old age(>70 years), low body surface area(<1.5M2), PTCA or stent insertion history, hypercholesterolemia, smoking, hypertension, DM, COPD, urgent or emergent operation, left main disease, low LV ejection fraction(<35%), and combined surgery. Results: Operative mortality was 7cases(8%). As a postoperative morbidity, perioperative myocardial infarction was 6 cases, cerebrovascular accident 6 cases, reoperation for bleeding 5 cases, acute renal failure 4 cases, gastrointestinal complication 3 cases, and mediastinitis 3 cases. In the evaluation of operative risk factors, low body surface area, DM and low LV ejection fraction were found to be predictive risk factors of postoperative morbidity(p<0.05), and low ejection fraction was especially a risk factor of hospital mortality(p<0.05). Conclusions: In this study, low body surface area, DM and low LV ejection fraction were risk factors of postoperative morbidity and low ejection fraction was a risk factor of hospital mortality.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.165-174
• /
• 2009

Background: With the advances of cardiac surgery, the demand for an artificial prosthesis has increased, and this has led to the development and utilization of diverse alternative materials. We conducted this research to improve an artificial prosthesis by examining the changes of the physical qualities, the pressure related tensile strength, the change in elasticity and the thermostability of a xenograft valve (porcine) and pericardium (bovine, porcine) based on the type of fixation liquid we used. Material and Method: The xenograft valves and pericardium were assigned into three groups: the untreated group, the fixed with glutaraldehyde (GA) group and the glutaraldehyde with GA+solvent such as ethanol etc. group. The surgeons carried out each group's physical activities. Each group's uniaxial tension and elasticity was measured and compared. Thermostability testing was conducted and compared between the bovine and porcine pericardium fixed with GA group and the GA+solvent group. Result: On the physical activity test in the surgeon's hand, no significant difference between the groups was sensed on palpation. For suture and tension, the GA+solvent group was slightly firmer than the low GA concentration group. In general, the circumferential uniaxial tension and elasticity of the porcine aortic and pulmonary valves were better in the fixed groups than that in the untreated group. There was no significant difference between the GA and GA+solvent groups (p>0.05). Bovine and porcine pericardium also showed no significant difference between the GA group and the GA+solvent group (p>0.05). When comparing between the groups for each experiment, the elasticity tended to be stronger in most of the higher GA concentration group (porcine pulmonary valve, porcine pericardium). On the thermostability testing of the bovine and porcine pericardium, the GA group and the G+solvent group both had a sudden shrinking point at $80^{\circ}C$ that showed no difference (bovine pericardium: p=0.057, porcine pericardium: p=0.227). Conclusion: When fixing xenograft prosthetic devices with GA, adding a solvent did not cause a loss in pressure-tension, tension-elasticity and thermostability. In addition, more functional solvents or cleansers should be developed for developing better xenografts.