• Journal of Korean Elementary Science Education
• /
• v.25 no.spc5
• /
• pp.556-566
• /
• 2007

The purpose of this study was to develop an electroencephalogram (EEG) based differential-scale for scientifically gifted students in elementary school. For this study, signals of EEG with 19 channels were recorded during the generation of our scientific hypothesis using 22 scientifically gifted students, and with 49 average students being used as the control group. IQ, TCT and knowledge generation (KG) as constructs of the scientifically gifted were administered for both the scientifically gifted and the normal, control group elementary students. A 'gifted' value was added to paper test scores of the IQ, TCT, and KG constructs in order to make a personal standardization score for the gifted students. As a dependent variable, the groups were divided by means of the standardization scores thus produced and as an autonomous variable, various EEG parameters were presented through linear analysis, nonlinear analysis, and interdependency measures of the EEG. Multiple linear regression analysis was applied successfully to explain the EEG parameters and to show the characteristics of the scientifically-gifted. The discrimination analysis was administered through the results of multiple linear regression of the EEG parameters thus produced. This study represents the foundation of the development of an EEG based discriminant-scale for scientifically gifted students in elementary school, because it will be able to faithfully discriminate between scientifically-gifted and average students. The results of this study indicates that most of the EEG parameters produced can contribute to predicting the characteristics of the scientifically-gifted in that they express the degree of mutual information and the coherence of mutuality. Accordingly, mutual connectivity which appears to originate in the brain seems to the core of discrimination.

• The KIPS Transactions:PartC
• /
• v.12C no.4 s.100
• /
• pp.597-602
• /
• 2005

In this study, file size for measurement and the service system's billing data were submitted to a comparative analysis by performing a verification test on the billing system of three major mobile communication services providers, based on the wireless Internet service packet. As shown in the result of the verification test, there were some differences in the billing data due to transmission overhead, according to the network quality that is affected by the wireless environment of mobile operators. Consequently, the packet analysis system was proposed as a means of applying consistent packet billing to all service providers being compared. If the packet analysis system is added to supplement the current billing system various user requirements can be met. Billing by Packet among mobile operators and differentiated billing based on the content value are available, since the packet data can be extracted through protocol analysis by service, and it can be classified by content tape through traffic data analysis. Furthermore, customer's needs can be satisfied who request more information on the detailed usage, and more flexible and diverse billing policies can be supported like application of charging conditions to the non-charging packet handling. All these services are expected to contribute to the popularization of the wireless Internet service, since user complaints about the service charge could be reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.340-347
• /
• 2016

Since the 1970s, manufacturing has been one of the key driving forces that has led to Korea's economic growth. However, this growth rate has been reduced significantly since the 2000s, and shows that revenues and employment are steadily decreasing. In addition, while manufacturing investment in Korea has dropped sharply, the United States, Germany, Japan, and other major countries have increased investment in manufacturing. These countries have promoted manufacturing innovation strategies that include the convergence of information and communications technologies (ICT) and manufacturing. For manufacturing innovation, it is important for time and cost savings required for product development to be achieved by changes in the production process, especially product design. Modeling and simulation (M&S) is a process that replaces physical product design, mockup making, and testing, with virtual product creation (modeling) and engineering analysis (simulation). In this paper, we analyze the economic ripple effect of supercomputing M&S using an input-output model technique based on the input-output tables published by the Bank of Korea. When we set the M&S budget (about US$16 million for the last 10 years) of the Korea Institute of Science and Technology Information (KISTI) as input coefficients, the effect on production inducement, value-added inducement, and employment inducement was analyzed to be US$24 million, US$13.4 million, and 267, respectively.

• Management & Information Systems Review
• /
• v.37 no.1
• /
• pp.123-138
• /
• 2018

In this paper, we use panel dataset from Korean linked worker-firm to analyse the effects of the workforce age structure on the productivity or labor costs. We measure 'labor productivity' as added value per capita, 'cost of labor' as labor cost per capita and estimate a dynamic panel model to study the effects of the workforce age structure on the productivity or labor costs. Empirical analysis results show that the workforce age structure is positively related to productivity and labor costs, but only up to the aged of 35-39. That is, we find that an increase in the proportion of younger workers or elder workers rather than the aged 35-39 has a negative effect on productivity and labor cost. In particular, the difference between the estimation coefficient of productivity and labor cost when the share of workers aged 50 or older is increased instead of the aged 35-39 is higher than the difference between the estimation coefficient of productivity and labor cost when the share of workers aged 30 or younger is increased instead of the aged 35-39. Our results exhibit that it is reasonable for firms to worry about declining productivity of elderly workers, whereas firms already used older workers efficiently, such as by adjusting their labor costs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.280-291
• /
• 2001

LL (Leased Line service) is a facility-based service as a traditional business data service, but new competition services, such as FR (Frame Relay), VPN (Virtual Private Network), and ATM (Asynchronous Transfer Mode), are value-added services. Because of different service classifications, it is hard to gather necessary data for the service providers to plan their market strategies and regulations and policies are also applied asymmetrically to each service provider. Therefore an appropriate market classification is required for the business data services. After various methods of market classification are reviewed, the Hendry model is selected in this paper to analyze substitution-degree among brands or among services. Since the structure of virtual competitions is required for the Hendry model to be applied to data service market, the market is analyzed first by the well-known Porter's model. By the analysis of Porter's model, two virtual competition structures are set up - one is for the competitions among leased line service providers, and the other is for the competitions among business data services such as LL, FR, VPN and ATM. After the Hendry model is applied to each competition structure, it is confirmed that 7 LL service providers do not compete directly, but 2 sub-markets exist for the LL service provisions. However, it is shown that 4 business data services compete directly. Using the Switching Probability Matrix from Hendry model, future market shares of LL service providers and market shares of business data services are forecasted. These empirical results are helpful for service providers to set competitive strategies with the minimization of cannibalization effect and they can easily and efficiently predict their market demands.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.115-121
• /
• 2013

This paper related with the DSE-MMA (Dithered Sign-Error MMA) that is the simplification of computational arithmetic number in blind equalization algorithm in order to compensates the intersymbol interference which occurs the passing the nonlinear communication channel in the presence of the band limit and phase distortion. The SE-MMA algorithm has a merit of H/W implementation for the possible to reduction of computational arithmetic number using the 1 bit quantizer in stead of multiplication in the updating the equalizer tap weight. But it degradates the overall blind equalization algorithm performance by the information loss at the quantization process compare to the MMA. The DSE-MMA which implements the dithered signed-error concepts by using the dither signal before qualtization are added to MMA, then the improved SNR performance which represents the roburstness of equalization algorithm are obtained. It has a concurrently compensation capability of the amplitude and phase distortion due to intersymbol interference like as the SE-MMA and MMA algorithm. The paper uses the equalizer output signal, residual isi, MD, MSE learning curve and SER curve for the performance index of blind equalization algorithm, and the computer simulation were performed in order to compare the SE-MMA and DSE-MMA applying the same performance index. As a result of simulation, the DSE-MMA can improving the roburstness and the value of every performance index after steady state than the SE-MMA, and confirmed that the DSE-MMA has slow convergence speed which meaning the reaching the seady state from initial state of adaptive equalization filter.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.27-38
• /
• 2002

VTIS(Value-added Traffic Information System), among the sub-systems of ATIS, is an Advanced Traffic System which innovates efficiency and safety. And this system, having marketability and publicness, is very important. Moreover, This system offers definite traffic information according to the demand of specified users. And it is expected to produce additional spread effects because of high participation rate of private sector. However, the VTIS service media are varied and there are varied optimal Prices and payment methods according to each medium. Because of that, there needs the study on these problems or optimal criteria. But because existing studies were devoted to estimate the optimal route, the study toward the optimal price which was considered part of user and service use demand do not exist. Accordingly, we surveyed under imaginary alternative pricing scenarios and forecasted the use demand of VTIS by using Binary Logit model. Also, for the users who answered that they would use VTIS service in survey, we classified their use's behaviors as four categories and estimated the use ratio to each category by using Ordered Probit model. Last, using sensitivity analysis for results form above, we derived the optimal price that is 2800won in monthly. 145won in payment per call. Then, VTIS service use rate is respectively 65%, 75%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.503-510
• /
• 2006

Readout circuit is to convert signal occurred in a defector into suitable signal for image signal processing. In general, it has to possess functions of impedance matching with perception element, amplification, noise reduction and cell selection. It also should satisfies conditions of low-power, low-noise, linearity, uniformity, dynamic range, excellent frequency-response characteristic, and so on. The technical issues in developing image processing equipment for focal plane way (FPA) can be categorized as follow: First, ultraviolet (UV) my detector material and fine processing technology. Second, ReadOut IC (ROIC) design technology to process electric signal from detector. Last, package technology for hybrid bonding between detector and ROIC. ROIC enables intelligence and multi-function of image equipment. It is a core component for high value added commercialization ultimately. Especially, in development of high-resolution image equipment ROIC, it is necessary that high-integrated and low-power circuit design technology satisfied with design specifications such as detector characteristic, signal dynamic range, readout rate, noise characteristic, ceil pitch, power consumption and so on. In this paper, we implemented a $8\times8$ FPA prototype ROIC for reduction of period and cost. We tested unit block and overall functions of designed $8\times8$ FPA ROIC. Also, we manufactured ROIC control and image boards, and then were able to verify operation of ROIC by confirming detected image from PC's monitor through UART(Universal Asynchronous Receiver Transmitter) communication.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.79-86
• /
• 2015

Purpose - The cosmetics industry is a traditional high value-added industry in terms of the domestic demand, small batch production systems, exclusive competition, and raw materials highly dependent on overseas countries as well as an oligopolistic market structure. However, new foreign brands and growing consumer awareness of inexpensive products, has triggered a shift. In line with changing lifestyles and the polarization of consumption, the industry faces a new market structure. Among its key characteristics is the cosmetics industry's numerous distribution channels (i.e., department stores, door-to-door sales, online shopping malls, brand shops, and discount stores). Therefore, the study of its distribution channels is essential. Research design, data, and methodology - The study analyzed channel distribution power divided into coercive and non-coercive power. The factors of coercive power included: unilateral request of an increase in commissions, interference in sales by taking advantage of a superior status, unilateral buck-passing at the time of a problem, unilateral request to stop sales activities, and a unilateral business contract; the factors of non-coercive power included favorable payment conditions, offers of various kinds of information, policy on commission reduction, pride in market entrance, and promotion support. In addition, the mediating variable "interdependence" was applied to the execution of department store (or mart) power and their shop conflicts and satisfaction to examine direct and indirect influential power. The methodology was a survey of managers of cosmetics shops in department stores (or marts). The questionnaire, based on a five-point Likert scale, included questions about basic personal information, execution of power, interdependence, conflict, and satisfaction. The study distributed 198 questionnaires and collected 131. Ten questionnaires with missing or hard to analyze data were excluded. Thus, 121 copies were analyzed. Results - According to the analysis, the execution of coercive power by department stores (or marts) did not affect interdependence, but the execution of non-coercive power did. Interdependence did not influence conflict, but did affect satisfaction. Additionally, the analysis revealed direct influential power: the execution of coercive power positively affected conflict and negatively influenced satisfaction; the execution of non-coercive power positively affected satisfaction. Conclusions - To offer suggestions for distribution business relations in the cosmetics industry, this study investigated how the execution of power by department stores (or marts) affected their shops. More specifically, it examined how much the execution of both coercive power and non-coercive power influenced conflict and satisfaction, and analyzed the mediating role of interdependence. In line with previous study results in various areas, coercive power was shown to be the source of conflict, leading to a decrease in satisfaction, whereas non-coercive power significantly positively influenced satisfaction. Moreover, non-coercive power increased interdependence, which led to greater satisfaction. As a result, interdependence had a mediating effect on non-coercive power and satisfaction. Based on the results, department stores (or marts) should look for improvements plans that increase interdependence. Such plans could alleviate conflict with the shops, increasing their satisfaction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.1-8
• /
• 2003

In this paper, performance of the CPC(complex phase code) which is recently proposed as a practical phase encoding method for phase-code multiplexes holographic memory system is comparatively analyzed with those of the conventional phase codes such as PR(pure random code), RCE(random code with equality), WHM(Walsh Hadamard Matrix). In computer simulation, the size of an address bean is fixed at 32$\times$32 pixels and 0%-25% phase-error ratio in a pixel are intentionally added to the real phase values to consider the nonlinear phase-modulation characteristics of the practical spatial light modulator. From comparative analysis of crosstalks and signal-to-noise ratios for these phase codes by calculating auto-correlation and cross-correlation, it is found that the CPC have the lowest cross-correlation mean value of 0.021, the lowest standard deviation of 0.0113 and the highest signal-to-noise ratio(SNR) of 27.4 among the four types of phase code. In addition, from the calculation of the number of all possible address beams for these four types of phase code as the size of the address beam is fixed to 3232 pixels, the CPC is found to have 6.334$\times$10$^{49}$ address beams, which are relatively higher number than that of the conventional phase codes.