• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.959-964
• /
• 1993

We developed fault diagnosis fuzzy expert system for ACS(Advanced Control System). ACS is a DCS(Distributed Control System) with advanced control algorithm fault tolerance capabilities, fault diagnosis functions, and so on. Fuzzy expert system developed for an ACS in this paper gives an operator alarm signal depending on the state of process value and manipulated value, and the cause of alarm in real time. Simple experiment result with several rules for the-fault-diagnosis of drum level loop in Seoul-Power-Plant.

• 한국전자거래학회지
• /
• 제3권1호
• /
• pp.155-173
• /
• 1998

In this paper we present the development of internet banking and its impact on financial market. The internet banking has been introduced since 1990s, from which customers could obtain most financial services over internet, and will replace with the traditional banks. According to a survey, most of bankers agree that internet will play an important role in banking industry. The internet banking has an enormous impact on the transfer system and banking industry. The transfer system is divided into two-large-value transfer system and small-value transfer system, depending on the size of its transfer amount. The internet banking will enhance the transfer system, especially small-value transfer system. It will reduce the time lag between transaction of service and its payment. However, a congestion or a blockage in a part of network might stop the financial service all over the network, which is called "computer risk". As internet banking develops, banks have incentives to reduce their branches and have to compete with information-business companies which can offer financial EDI.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.301-304
• /
• 2012

Epoxy/microsilica (65 phr)/nanosilica (0~5 phr) composites (EMNC) were prepared in order to develop a high-voltage insulation material, where phr means parts per hundred relative to the epoxy oligomer. Tensile and flexural tests of the composites were carried out, and the AC electrical breakdown strength was measured, after which all the data were estimated by Weibull statistical analysis. As the nanosilica content increased, the tensile strength increased, and the highest value was 117.7 MPa in the EMNC system with 3 phr nanosilica, which was ca. 10% higher than that of the system without nanosilica. The value then decreased after 3 phr. The flexural strength and AC electrical breakdown strength showed the same tendencies as the tensile strength. The highest value of the flexural strength was 184.6 MPa in the EMNC system with 3 phr of nanosilica, which was ca. 15% higher than that of the system without nanosilica. The strongest value of the AC electrical breakdown strength was 79.0 kV/0.5 mm in the EMNC system with 3 phr of nanosilica, which was ca. 34% higher than that of the system without nanosilica.

• 경영정보학연구
• /
• 제3권1호
• /
• pp.19-30
• /
• 2001

With the e-business paradigm emerging, the website became a critical resource for most corporations. However, the amount of value creation through internet is still in question. This paper shows the result of an exploratory study on website assessment, following the tradition of Technology Acceptance Model (TAM). We viewed the intended usage as the value of the website and added such factors as playfulness, commitment, system quality, and information security as external variables of the model. Website types, visiting purposes, and the user system quality were included as moderators. The website value could differ depending on website types, purposes of the use and system quality. In the case of internet shopping malls, playfulness, compatibility, website quality were identified as key influencers, while for stock trading users, however, commitment and security factors are more important. In terms of user purposes, information search requires both the compatibility and the website quality. Also the website quality was strongly affected by the user system quality. In other words, any investment of upgrading the website system quality can be meaningless unless the user system quality is improved as well. For each variable considered, empirical results are discussed and practical implications are provided.

• 한국항해항만학회지
• /
• 제26권3호
• /
• pp.311-316
• /
• 2002

본 연구에서는 항만하역장비인 스프레더용 충격흡수기의 개발을 위해 스프링과 오일댐퍼로 구성된 세 가지 형태의 모델에 대한 동적응답을 유한요소해석에 의해 수행하였다. 또한, 세 가지 모델의 충격흡수기에서 피스톤의 제한된 행정을 정적변수로 하고 목적함수인 충격에 대한 반력이 최소가 되도록 최적설계를 수행하였다. 본 연구의 결과로는 직렬식 2자유도계 모델의 반력이 가장 작게 나타났으며 그 다음으로는 1자유도계 모델, 병렬식 2자유도계 모델의 순으로 나타났다. 스프링상수와 감쇠계수의 변화가 반력에 미치는 영향을 확인하였으며, 최적설계 결과 각 모델에 대한 반력이 최소가 되는 스프링상수와 감쇠계수를 구하였다.

• Journal of Platform Technology
• /
• 제6권1호
• /
• pp.9-16
• /
• 2018

최근에 이르러 많은 분석자들은 파이썬과 R 등을 이용하여 다양한 분석 및 통계를 효율적으로 사용하여 데이터를 분석하고 있다. 하지만 웹 시스템을 통하여 다양한 분석을 실시간적으로 표현 하고자 하는 요구 사항을 두가지 언어만을 이용하여 해결하기는 어렵다. 그리고 R 에서 P Value 등을 추출할 때 적합한 알고리즘을 적용하지만 Java 에서는 해당하는 알고리즘이 없거나 또는 해당 소스가 검증이 되지 아니하여 추출된 P-Value 값이 R 에서의 값과 다른 것을 확인 할 수 있다. 따라서 본 논문에서는 다른 언어에서 R 을 이용하여 분석자의 분석 알고리즘 내용을 바로 자신의 시스템에 적용 할 수 있는 방안을 제안하고자 한다.

• 치과방사선
• /
• 제29권1호
• /
• pp.65-85
• /
• 1999

Objectives: To determine the effect of interpolation functions when processing the digital periapical images. Material and Methods: The digital images were obtained by Digora and CDR system on the dry skull and human subject. 3 oral radiologists evaluated the 3 portions of each processed image using 7 interpolation methods, and ROC curves were obtained by trapezoidal methods. Results: The heighest Az value(0.96) was obtained with cubic spline method and the lowest Az value(0.03) was obtained with facet model method in Digora system. The heighest Az value (0.79) was obtained with gray segment expansion method and the lowest Az value(0.07) was obtained with facet model method in CDR system. There was significant difference of Az value in original image between Digora and CDR system at a=0.05 level. There were significant differences of Az values between Digora and CDR images with cubic spline method, facet model method, linear interpolation method and non-linear interpolation method at α=0.1 level.

• 한국의류학회지
• /
• 제26권7호
• /
• pp.1036-1042
• /
• 2002

The purpose of this study was to set up the sizing system for clothes of lower body. Sample size was 191 females and their age ranges were from 19 to 24 years old. The lower body types for the sizing system were categorised by height and drop value of lower body(hip circumference-waist circumference). The results were as follows. 1. The Thick waist (drop value of lower body<21) and the Slender waist (drop value of lower body$\geq$27) had the low coverage rates of 14.2% and 11.5%, and the Normal waist (21$\leq$ drop value of lower body<27) had the high coverage rate of 72.8%. 2. The height could be divided into three groups and thar covered 97.5%. The Short(152cm) covered 2l.0%, the Regular(160cm) 58.7% and the Tall(168cm) 17.8%. 3. The size interval of hip circumference was 4cm and the intervals of waist circumference were 3cm and 4cm. The interval of slacks length was 4∼5cm according to three height groups.

• 벤처혁신연구
• /
• 제4권1호
• /
• pp.23-38
• /
• 2021

본 연구는 비대면 교육서비스 품질 구성요소인 시스템 편리성, 시스템품질, 상호작용성이 학생이 지각하는 교육서비스 가치와 학습몰입과 전공만족도에 영향을 미치는 영향을 분석하고자 하였다. 본 연구를 통해 다음과 같은 연구결과를 도출할 수 있었다. 첫째, 비대면 교육서비스품질의 구성요소인 시스템편리성, 시스템품질, 상호작용성의 3가지 요인이 교육서비스가치에 통계적으로 유의한 영향을 미치고 있는 것으로 나타났다. 둘째, 비대면 교육서비스품질의 구성요소인 시스템편리성, 시스템품질, 상호작용성의 3가지 요인중에서 시스템품질과 상호작용성은 학습몰입에 통계적으로 유의한 영향을 미치고 있는 것으로 나타났다. 셋째, 비대면 교육서비스 가치가 전공만족도에 미치는 영향을 분석한 결과, 교육서비스가치는 전공만족도에 통계적으로 유의한 영향을 미치고 있는 것으로 나타났다. 넷째, 학습몰입이 전공만족도에 미치는 영향을 분석한 결과, 학습몰입은 전공만족도에 통계적으로 유의한 영향을 미치고 있는 것으로 나타났다.

• 농촌계획
• /
• 제29권2호
• /
• pp.55-65
• /
• 2023

This study was performed with 473 dwellers living in the cities, to study how purchasing intention was affected by the Korea important agricultural heritage system designation on Changwon sweet persimmon farming. This study identified the relationship between consumption value and purchase intention through Sheth's theory of consumption value. Functional, social, emotional, epistemic and symbolic values were all found to have a positive (+) effect on purchase intention, and among them, symbolic value properties were found to have the greatest impact. This study presents an important implication that emphasizing symbolism is most effective when establishing policies in the direction of promoting persimmon consumption in the Changwon area designated as Korea important agricultural heritage system.