• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.511-514
• /
• 1997

The objective of this study is to propose a finite element based design of the dental implant replacing unction and shape of natural teeth. For this, geometric actors were varied to investigate stress distribution of the alveolar bone around dental implant. In this study, the results were obtained based on the theory of linear elastic, with geometrically axisymmetric assumption. Geometric actors determining implant shape are ranged as 0.2mm-0.6mm, 0.04mm-0.1mm, 0.46mm-0.84mm or height of thread, radius of curvature of thread, and pitch, respectively. The stresses in the alveolar bone caused by biting force playa major role in determining implant stability. Especially, the stress concentration in the cortical bone causes bone resorption and finally makes the implant unstable. Therefore, the stress distributions were investigated on the side of the alveolar bone focusing on the area of cortical bone. The maximum von Mises stress was found to increase up to 6% as the height of thread increases, while its value was to decrease to 19% when the radius of curvature increase within the assigned ranges. For the variation of pitch, the larger size of pitch results in greater maximum von Mises stress when the length of the implant under consideration is fixed. The existence of the neck below the shoulder did not affect the stress distribution in the region of alveolar bone. However, the stresses on the side of the implant near the neck were found to be different by 20% approximately. Therefore, the neck can provide the stability of the implant against continuing biting movement. As a conclusion, the finite element based study shows a potential in designing the dental implant systematically.

• 대한기계학회논문집B
• /
• 제37권1호
• /
• pp.9-18
• /
• 2013

이상 횡 유동은 응축기, 증발기와 원자로 증기발생기와 같은 쉘과 튜브의 열 교환기에서 볼 수 있다. 이상 유동장에 놓인 구조물에 작용하는 수동력을 이해하기 위해서는 이상유동의 특성을 이해하는 것이 중요하다. 이상 유동의 유동특성과 유동변수를 소개하고 관군에서의 압력손실과 실린더에 작용하는 압력분포에 의한 수동력을 평가하기 위한 실험을 수행하였다, 실험부 입구에서 이상유동은 혼합되었으며 실험은 횡 방향 이상 유동장에 놓인 정규 삼각형 배열을 갖는 관군을 사용하여 수행하였다. 관군에서의 흐름방향 압력손실을 측정하여 이상유동의 마찰승수를 계산하고 이론적 결과와 비교하였다. 또한 특정 실린더에 작용하는 원주 방향 압력 분포의 측정결과와 이상유동의 기초이론에 근거하여 압력손실계수의 분포 및 항력계수에 미치는 체적건도와 단위면적당 질량유량의 효과를 평가하였다. 튜브 표면에 작용하는 측정된 압력을 수치해석방법으로 적분하여 항력계수를 계산하였다. 작은 질량 유량의 경우에 측정된 마찰 승수는 기존의 이론 결과와 잘 일치하며 압력분포에 의한 항력계수에 작용하는 기공률의 영향은 기존의 실험결과와 정성적으로 유사한 경향을 보이고 있다.

• 한국지진공학회논문집
• /
• 제26권5호
• /
• pp.191-202
• /
• 2022

Markov envelope as a theoretical solution of the parabolic wave equation with Markov approximation for the von Kármán type random medium is studied and approximated with the convolution of two probability density functions (pdf) of normal and gamma distributions considering the previous studies on the applications of Radiative Transfer Theory (RTT) and the analysis results of earthquake records. Through the approximation with gamma pdf, the constant shape parameter of 2 was determined regardless of the source distance r_o. This finding means that the scattering process has the property of an inhomogeneous single-scattering Poisson process, unlike the previous studies, which resulted in a homogeneous multiple-scattering Poisson process. Approximated Markov envelope can be treated as the normalized mean square (MS) envelope for ground acceleration because of the flat source Fourier spectrum. Based on such characteristics, the path duration is estimated from the approximated MS envelope and compared to the empirical formula derived by Boore and Thompson. The results clearly show that the path duration increases proportionately to r_o^1/2-r_o², and the peak value of the RMS envelope is attenuated by exp (-0.0033r_o), excluding the geometrical attenuation. The attenuation slope for r_o≤100 km is quite similar to that of effective attenuation for shallow crustal earthquakes, and it may be difficult to distinguish the contribution of intrinsic attenuation from effective attenuation. Slowly varying dispersive delay, also called the medium effect, represented by regular pdf, governs the path duration for the source distance shorter than 100 km. Moreover, the diffraction term, also called the distance effect because of scattering, fully controls the path duration beyond the source distance of 300 km and has a steep gradient compared to the medium effect. Source distance 100-300 km is a transition range of the path duration governing effect from random medium to distance. This means that the scattering may not be the prime cause of peak attenuation and envelope broadening for the source distance of less than 200 km. Furthermore, it is also shown that normal distribution is appropriate for the probability distribution of phase difference, as asserted in the previous studies.

• 지질공학
• /
• 제4권1호
• /
• pp.13-28
• /
• 1994

파쇄대를 포함하고 있는 결정암체의 수리전도(K)는 현장조사에 의해서 기초자료가 얻어지고 해석학적 방법에 의해서 규명된다. 이러한 현장조사 방법 및 절차는 조사 목적 및 현장여건 그리고 결정암체의 특성에 따라서 결정된다. 파쇄대나 절리등의 불연속면을 포함하고 있는 결정질암체에서의 수리전도도는 주로 패커시험(Packer teat)과 스러그시험(Slug test)으로 결정한다. 동일 시험공에서 패커시험의 시험간격을 좁게 할수록 정상류 해석법에 의한 수리전도도가 켜지는 경향을 나타내며 Hvorslev의 이론에 부합되는 증거로서, 동일 시험공내에서도 주입구간의 간격에 따라서 수리전도도는 규모종속(scale effect)을 나타낸다고 할 수 있다. 또한 시험 순서에 따라서 수리전도도의 변화를 나타낸다고 할 수 있다. 수리지질할적으로 주요 불연속면이 포함된 패커시험구간에서 수리전도도의 수직분포를 볼때,패커시험간격을 달리한다고 하더라도,이러한 불연속면을 포함한 구간에서는 수리전도도의 상대적인 이상대를 나타낸다.스러그시험과 패커시험으로 구한 시험정의 전구간 평균수리전도도를 비교해 볼 때,일반적으로 상당히 부함되는 값을 나타낸다.

• Journal of Electrochemical Science and Technology
• /
• 제6권4호
• /
• pp.121-130
• /
• 2015

The micro emulsion method has been successfully used for preparing perovskite LaCoO₃ with uniform, fine-shaped nanoparticles showing high activity as electro catalysts in oxygen reduction reactions (ORRs). They are, therefore, promising candidates for the air-cathode in metal-air rechargeable batteries. Since the activity of a catalyst is highly dependent on its specific surface area, nanoparticles of the perovskite catalyst are desirable for catalyzing both oxygen reduction and evolution reactions. Herein, LaCoO₃ powder was also prepared by sol-gel method for comparison, with a broad particle distribution and high agglomeration. The electro catalytic properties of LaCoO₃ and LaCoO₃-carbon Super P mixture layers toward the ORR were studied comparatively using the rotating disk electrode technique in 0.1 M KOH electrolyte to elucidate the effect of carbon Super P. Koutecky-Levich theory was applied to acquire the overall electron transfer number (n) during the ORR, calculated to be ~3.74 for the LaCoO₃-Super P mixture, quite close to the theoretical value (4.0), and ~2.7 for carbon-free LaCoO₃. A synergistic effect toward the ORR is observed when carbon is present in the LaCoO₃ layer. Carbon is assumed to be more than an additive, enhancing the electronic conductivity of the oxide catalyst. It is suggested that ORRs, catalyzed by the LaCoO₃-Super P mixture, are dominated by a 2+2-electron transfer pathway to form the final, hydroxyl ion product.

• International Journal of Advanced Culture Technology
• /
• 제6권3호
• /
• pp.88-97
• /
• 2018

As the trade among the countries increases, domestic agriculture is facing a crisis. Especially domestic rice industry is suffering from the rice market opening problem and the domestic rice industry itself. As a counter measure against this, despite the promotion of the rice processing food industry, the export of rice processed food has decreased by an average annual rate of 12.3% since 2011 due to the lack of customized export strategy, such as low price competitiveness, insufficient quality and brand management. As a measure, we selected indicators to prioritize establishment of export strategy of rice processed food business and used AHP methodology to draw the weight for each indicators. The selection of export strategy prioritization indicator was based on the marketing mix theory, various previous research reviews and expert consulting. Five higher level indicators and nineteen detailed indicators were derived, and a weighted value of them was analyzed using a professional package. As a result, the relative importance of higher level indicators was 45.5% for product differentiation, 18.4% for management competence, 13.0% for export infrastructure, 12.0% for product pricing, and 11.1% for product distribution. The relative importance of the lower level indicators was 17.3% for product safety, 15.3% for product quality, 9.1% for management expertise, and 7.0% for product brand. This result is expected to be used as export strategy indicators of rice processed food export business.

• 한국전산구조공학회논문집
• /
• 제23권3호
• /
• pp.331-340
• /
• 2010

적응적 hp-세분화 기법과 그 기법의 효과적인 구성방법을 포함한 새로운 적응적 유한요소 알고리즘의 기초이론 및 적용이 이 연구를 통해 제시되었다. 적응적 hp-세분화 기초의 유한요소기법은 적분형 르장드르 형상함수와 요소별로 불균등한차수의 분배 및 비정형적인 절점연결과 관련된 연속조건을 만족시킬 수 있는 제약조건을 필요로 한다. 따라서 요소간의 접합부분에서 적응적 hp-유한요소망의 연속성이 중요한 문제로 대두된다. 이러한 문제를 요소경계에 연속성 제약조건을 절점연결 사상행렬을 적용하여 해결하였다. 또한, 적분형 르장드르 형상함수의 계층성질을 이용하여 제시된 알고리즘의 효율적 정식화 방안을 제시하였다. 간단한 캔틸레버문제가 h-세분화, p-세분화 그리고 hp-세분화 방법에 의해 계산되었다. hp-세분화의 결과는 다른 방식의 세분화에 비해 보다 빠른 수렴성을 보여 주는 것이 확인되었다. 그러므로 제시된 hp-세분화 알고리즘은 실제문제에 효율적으로 적용될 수 있을 것으로 생각된다.

• 한국인터넷방송통신학회논문지
• /
• 제20권5호
• /
• pp.151-156
• /
• 2020

주기적인 사다리꼴 격자구조에서 광 신호의 회절 특성과 테이퍼 측면의 중요한 효과를 분석하기 위하여, 처음으로 격자구조의 Toeplitz 유전율 tensor를 2D spatial Fourier 급수로 정의하고 공식화하였다. 그때 각 층에서의 필드들은 고유치 문제에 기초하여 표현하였으며, 완전한 해는 적절한 경계 값 문제에 의존하는 모드 전송선로 이론 (MTLT)을 사용하여 정확하게 유도하였다. 이에 기초하여, 사다리꼴 형태의 굴절률 분포를 갖는 격자구조의 테이퍼 측면 프로파일이 서브 파장 격자 반사기 설계에 어떠한 영향을 미치는지 자세하게 수치해석 하였다. 사다리꼴 격자구조의 회절특성에 기초한 수치해석 결과, 테이퍼 측벽 프로파일은 반사 대역폭, 평균 반사율, 그리고 밴드 에지를 결정하는 데 중요한 역할을 하는 것으로 나타났다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제34권11호
• /
• pp.971-983
• /
• 2007

셀룰러 유전알고리즘(CGAs)은 모집단이 특정한 위상 구조를 갖는 유전알고리즘의 일종이다. 보통의 경우, CGAs의 모집단 공간은 네트워크 이론 측면에서 상대적으로 긴 평균경로길이와 큰 클러스터링계수를 갖는 정규 격자형 위상 구조이다. 평균경로길이가 길면 멀리 떨어진 개체들 사이의 유전적 상호작용이 느리게 일어난다. 따라서 클러스터링계수를 유지하면서 평균경로길이를 줄인다면 개체의 다양성이 유지되면서도 모집단이 보다 빠르게 수렴할 것이다. 이 논문에서는 최소좁은세상 셀룰러 유전알고리즘(SSWCGAs)을 제안한다. SSWCGAs에서 각 개체는 클러스터링이 잘되었으면서도 노드를 연결하는 평균경로길이가 짧은 모집단에 거주하여, 클러스터링에 의한 세부탐색 능력을 유지하면서도 전역탐색을 잘하게 된다. 네 가지 실변수 함수와 두 가지 GA-hard 문제에 대한 실험을 통하여 SSWCGAs가 SGAs 및 CGAs보다 효과적임을 보였다.

• Journal of Korea Trade
• /
• 제25권6호
• /
• pp.57-77
• /
• 2021

Purpose - International strategic alliance has been regarded as a strategic decision made by firms' managerial problems and ensure performance growth. From the perspective of the proactive behavior for changing strategies in a global market, this study aims to identify whether performance feedback influences firms' decisions to pursue strategic alliances. This study examines the effects of performance feedback on performance when firms use strategic alliances. Design/methodology - To analyze the impact of performance feedback on forming an international strategic alliance, this study adopt the concept of performance feedback to develop a research model and our hypotheses. Thus, this study used a two-stage least squares unbalanced panel data analysis with random effects. This study is based on 24,543 observations from Korean manufacturing firms from 2007 to 2016. Findings - The results show that firms pursue the formation of strategic alliances more actively, if their past financial and R&D performance are lower than their aspiration level, based on the result of performance feedback. An in split sample analysis for examining the effect of a firm's technology sophistication based on the OECD's classification, negative innovation performance discrepancy has positive effects on the probability of international alliance in high-tech and medium-high-tech industries. Financial performance also improves when a firm decides to form a strategic alliance based on the results of performance feedback. Originality/value - This research extends recent efforts to better understand the effect of performance feedback on firms' performance when they use strategic alliances. These findings suggest that the CEOs and managers of firms should consider the performance feedback perspective when deciding to pursue a strategic alliance to improve performance. In other words, the decision-makers in a firm must analyze and consider various complex variables inside and outside the firm and expand such subjects of examination to more complex and dynamic factors.