• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.6
• /
• pp.511-517
• /
• 2001

We evaluated the electrical properties of 37 multifilamentary jointed tapes processed by superconducting joint. In the superconducting joining method, a lap-joint was used. Tapes were selectively etched, and exposed superconducting cores of the two tapes were brought into contact with each other and then only the joined region was uniaxially pressed in the range of 1,000 to 2,50 MPa. The critical current ratio(CCR) and n-value of the jointed tape were evaluated as a function of uniaxial pressure and number of step in the contacting region. It was observed that the CCR was dependent on the number of step, but almost independent of uniaxial pressure. The highest critical current ratio and n-value were obtained to be 58% and 26%, respectively, for the jointed tape to the tape itself.

• Journal of Environmental Impact Assessment
• /
• v.18 no.1
• /
• pp.31-39
• /
• 2009

A lot of data which are used in environment analysis of air pollution have characteristics that are distributed continuously in space. In this point, the collected data value such as precipitation, temperature, altitude, pollution density, PM10 have spatial aspect. When geostatistical data analysis are needed, acquisition of the value in every point is the best way, however, it is impossible because of the costs and time. Therefore, it is necessary to estimate the unknown values at unsampled locations based on observations. In this study, spatial interpolation method such as local trend surface model, IDW(inverse distance weighted), RBF(radial basis function), Kriging were applied to PM10 annual average concentration of Seoul in 2005 and the accuracy was evaluated. For evaluation of interpolation accuracy, range of estimated value, RMSE, average error were analyzed with observation data. The Kriging and RBF methods had the higher accuracy than others.

• Food Science and Preservation
• /
• v.4 no.1
• /
• pp.33-38
• /
• 1997

In order to provide informations for designing packaging and storage condition of dry jujube (Zizyphus jujuba MILLER), moisture sorption isotherm was determined for temperatures of 20, 30 and 4$0^{\circ}C$, and quality changes were evaluated as function of temperature and water activity. Dry jujube at a given water activity showed higher equilibrium moisture content for lower temperature. Moisture isothem could be fitted by GAB model equation, giving higher C value, lower m0 and relatively constant k value with increase in temperature. Ascorbic acid was lost more highly at higher temperature and water activity, and showed negligible retention for whole range of water activity and temperature studied after 141 days. Browning increased with water activity up to 0.73 at 30 and 4$0^{\circ}C$. Dry jujube of high water activity had high L value in surface color, which represent brightness of surface color. Considering quality retention in the storage, dry jujube is desired to be dried to water activity of 0.42 and be stored at temperature below 3$0^{\circ}C$

• The Journal of Advanced Prosthodontics
• /
• v.11 no.1
• /
• pp.32-40
• /
• 2019

PURPOSE. The purpose of this study was to compare mechanical and physical properties of injection-molded thermoplastic denture base resins. MATERIALS AND METHODS. In this study, six commercially available products (VA; Valplast, LC; Lucitone, ST; Smiltone, ES; Estheshot-Bright, AC; Acrytone, WE; Weldenz) were selected from four types of thermoplastic denture base materials (Polyamide, Polyester, Acrylic resin and Polypropylene). The flexural properties and shore D hardness have been investigated and water sorption and solubility, and color stability have evaluated. RESULTS. For the flexural modulus value, ES showed the highest value and WE showed significantly lower value than all other groups (P<.05). Most of experimental groups showed weak color stability beyond the clinically acceptable range. CONCLUSION. Within the limits of this study, thermoplastic denture base resin did not show sufficient modulus to function as a denture base. In addition, all resins showed discoloration with clinical significance, and especially polyamides showed the lowest color stability.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1493-1510
• /
• 2000

Theoretical models that can be used to predict the range of main lobe widths and the probability distribution of the peak sidelobe levels of two-dimensionally sparse arrays are presented here. The arrays are considered to comprise microphones that are randomly positioned on a segmented grid of a given size. First, approximate expressions for the expected squared magnitude of the aperture smoothing function and the variance of the squared magnitude of the aperture smoothing function about this mean are formulated for the random arrays considered in the present study. By using the variance function, the mean value and the lower end of the range i.e., the first I percent of the mainlobe distribution can be predicted with reasonable accuracy. To predict the probability distribution of the peak sidelobe levels, distributions of levels are modeled by a Weibull distribution at each peak in the sidelobe region of the expected squared magnitude of the aperture smoothing function. The two parameters of the Weibull distribution are estimated from the means and variances of the levels at the corresponding locations. Next, the probability distribution of the peak sidelobe levels are assumed to be determined by a procedure in which the peak sidelobe level is determined as the maximum among a finite number of independent random sidelobe levels. It is found that the model obtained from the above approach predicts the probability density function of the peak sidelobe level distribution reasonably well for the various combinations of two different numbers of microphones and grid sizes tested in the present study. The application of these models to the design of random, sparse arrays having specified performance levels is also discussed.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.136-141
• /
• 2001

In this study, computer program for the optimum design of two continuous box culvert was developed. It was shown that even though the starting points and optimization method are different, the objective function and optimum design variables converge to a value within a close range respectively, and consequently the optimum design program developed in this study is reliable and robust. MMFD is the most efficient one from the viewpoint of convergency and computing time.

• Journal of applied mathematics & informatics
• /
• v.6 no.3
• /
• pp.735-746
• /
• 1999

Based on an active set strategy a method for solving lin-early constrained indefinite quadratic programs to solve the correspond-ing system of equations at each iteration is presented. The algorithm takes two descent directions to strictly decrease the value of objective function and obtains a suitable step to maintain feasibility. Computa-tional results on a range of quadratic test problems are given.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.206-212
• /
• 2000

In this study, computer program for the optimum design of agricultural aqueduct tunnel was developed. It was shown that even though the starting points and optimization method are different, the objective function and optimum design variables converge to a value within a close range respectively, and consequently the optimum design program developed in this study is reliable and robust. 3D-design drawing can be drawn using automation design computer program developed in this study

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.212-218
• /
• 1999

In this study , Computer programs for the optimum and automation desgin of reinforced concrete box culvert were developed. It was shown that even though the strarting points and optimization method are different the objective function and optimum design variables converge to a value within a close range respectively, and consequently the optimum design program developed in the study is reliable and stron. 3D-design drawing can be drawn using automation desgin computer program developed in this study.

• Journal of Internet of Things and Convergence
• /
• v.6 no.4
• /
• pp.49-57
• /
• 2020

In this paper, I provided an approximation function Li*2,10(x) using logarithm integral for the counting function π*2,10(x) of consecutive deca primes. Several personal computers and Mathematica were used to validate the approximation function Li*2,10(x). I found the real value of π*2,10(x) and approximate value of Li*2,10(x) for various x ≤ 1011. By the result of theses calculations, most of the error rates are margins of error of 0.005%. Also, I proved that the sum C2,10(∞) of reciprocals of all primes with difference 10 between primes is finite. To find C2,10(∞), I computed the sum C2,10(x) of reciprocals of all consecutive deca primes for various x ≤ 1011 and I estimate that C2,10(∞) probably lies in the range C2,10(∞)=0.4176±2.1×10-3.