• Journal of Korean Neurosurgical Society
• /
• v.54 no.3
• /
• pp.232-235
• /
• 2013

Objective : Major complaints of carpal tunnel syndrome (CTS) are sensory components. However, motor deficit also impedes functional status of hand. Contrary to evaluation of sensory function, the objective, quantitative evaluation of median nerve motor function is not easy. The motor function of median was evaluated quantitatively using load cell and its correlation with findings of electrodiagnostic study (EDS) was evaluated. Methods : Objective motor function of median nerve was evaluated by load cell and personal computer-based measurement system. All of the measurement was done in patients diagnosed as having idiopathic CTS by clinical features and EDS findings. The strength of thumb abduction and index finger flexion was measured in each hand three times, and the average value was used to calculate thumb index ratio (TIR). The correlation of TIR with clinical, EDS, and ultrasonographic findings were evaluated. Results : The TIR was evaluated in 67 patients (119 hands). There were 14 males and 53 females, mean age were 57.6 years (range 28 to 81). The higher preoperative nerve conductive studies grade of the patients, the lower TIR was observed [p<0.001, analysis of variance (ANOVA)]. TIR of cases with thenar atrophy were significantly lower than those without (p<0.001, t-test). TIR were significantly lower in patients with severe median nerve swelling in ultrasonography (p=0.042, ANOVA). Conclusion : Measurements of median nerve motor function using load cell is a valuable evaluation tool in CTS. It might be helpful in detecting subclinical motor dysfunction before muscle atrophy develops.

• Journal of Biosystems Engineering
• /
• v.27 no.1
• /
• pp.59-66
• /
• 2002

The objectives of the study were to analyze the acoustic characteristics related to the internal quality factors of watermelon(Citrulus Vulgaris Schrad). Among the various internal quality factors, only four factors such as ripeness, inside cavity, yellow belt and blood flesh were considered in this study. Relationships between the internal quality factors, the day after fruit set and the day after harvest were also investigated. Test apparatus was the same as the apparatus described in the previous study(Choi et at., 2000). The selected sample was divided into four groups; 69 samples used for ripeness tests 56 samples for ripeness test along the day after fruit set and for yellow belt detection, 60 samples for ripeness along the day after harvest 44 samples fur blood flesh detection. It was shown that the first peak frequencies shifted to the lower range and the energy ratios of the bandwidths between 0∼550 Hz to the bandwidths between 850∼2500 Hz increased as the day after fruit set elapsed. Since the acoustic responses of the watermelon such as frequency and magnitude began to change from 10 days after harvest, the storage period of watermelon in a normal temperature condition seemed to be approximately 10 days after harvest. The ratios of the first peak amplitude to the maximum peak amplitude fur the sound watermelon showed the higher value than that fur watermelon with cavity inside, and the separation between the sound and cavity inside could be accomplished by the ratio value of 0.25. The energy ratios (0∼550 Hz/850∼2,500 Hz) for the watermelon with cavity inside showed the higher value than 2.3. The frequency characteristics of the yellow belt watermelon appeared mostly in the range of 600∼900 Hz frequencies. The yellow belt watermelon showing the energy spectral density function at this frequency range to be over 70 seemed to be not a marketable commodity, The energy ratios(0∼550 Hz/850∼2,500 Hz) for the blood flesh watermelon showed the higher value than 3.5.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.500-506
• /
• 2019

In this study, we present a decision function of optimal smoothing parameter for baseline correction using Asymmetrically reweighted penalized least squares (arPLS). Baseline correction is very important due to influence on performance of spectral analysis in application of spectroscopy. Baseline is often estimated by parameter selection using visual inspection on analyte spectrum. It is a highly subjective procedure and can be tedious work especially with a large number of data. For these reasons, an objective procedure is necessary to determine optimal parameter value for baseline correction. The proposed function is defined by modeling the median value of possible parameter range as the length and order of the background signal. The median value increases as the length of the signal increases and decreases as the degree of the signal increases. The simulated data produced a total of 112 signals combined for the 7 lengths of the signal, adding analytic signals and linear and quadratic, cubic and 4th order curve baseline respectively. According to the experimental results using simulated data with linear, quadratic, cubic and 4th order curved baseline, and real Raman spectra, we confirmed that the proposed function can be effectively applied to optimal parameter selection for baseline correction using arPLS.

• Journal of Science of Art and Design
• /
• v.8
• /
• pp.267-296
• /
• 2005

Typography, as the median for communication, has expanded its roles according the attributes of the media where it Is used, and the change of media follwing the change of times is presenting new directions to the field of typography. The attempts of 20C experimental typography prioritize visual formativeness, free typography and language started to appear on printed matters and different kinds of prints put pep in magazines. Thus, experiments in the aspects of effective delivery of inpormation that letters have and aesthetic side of shapes of letter are continuing. Today with the appearance of multimedia, development of visual colture and rapid development of digital technology, the range of experimental typography has expanded even wider and therefore, different kinds of expressions became possible. As seen above, unlike the existing static printed media that carries linguistic information only, letters in the multimedia environment is shown in the movie titles, TV or web not only as a basic visual media such as type and image, but as a dynamic and complex factor that contains additional information of motion and sound factor. This study will attempt to find the historic context of focus of moment from the kinetic art and define the moving letters as kinetic typography. Therefore, this paper will have an understanding on kinetic typography's background, concept and characteristics following the change of communication environment in the multimedia era and tried to study the basic theories of kinetic typography and the information delivery and imagery function of letters. Also, this paper attempted to carry out a study on whether kinetic typography is delivering information smoothly from the aspect of communication through the image role as delivering information by studying major works of artists who have influenced kinetic typography. Based on this study, I would like to suggest new direction for effective delivery of information and value of use.

• Journal of Digital Convergence
• /
• v.19 no.10
• /
• pp.253-263
• /
• 2021

Machine learning is the process of constructing a cost function using learning data used for learning and an artificial neural network to predict the data, and finding parameters that minimize the cost function. Parameters are changed by using the gradient-based method of the cost function. The more complex the digital signal and the more complex the problem to be learned, the more complex and deeper the structure of the artificial neural network. Such a complex and deep neural network structure can cause over-fitting problems. In order to avoid over-fitting, a weight decay regularization method of parameters is used. We additionally use the value of the cost function in this method. In this way, the accuracy of machine learning is improved, and the superiority is confirmed through numerical experiments. These results derive accurate values for a wide range of artificial intelligence data through machine learning.

• Journal of Korea Water Resources Association
• /
• v.45 no.11
• /
• pp.1169-1186
• /
• 2012

Storage function method has been used for flood forecasting in the major rivers in Korea, however, the researches on the relationship between the parameters and runoff characteristics was not sufficient. In addition, there has been a controversy about the optimized parameters without the consideration of the physical characteristics of the basin. Therefore, in this study, the SCE-UA method is used to optimize the parameters and the proposed method was applied with two stage optimization in the Jeongseon and Yeongwol watersheds located in the most upstream in the South Han river. The contour map was developed to investigate parameters and the error surface calculated from the runoff. The proposed parameters is to provide a range of the possible parameter set in a watershed, rather than a specific value. However, the applicability is examined using the average value of the proposed ranged parameters. In this study, the criticism about the optimization technique to find an optimal value having no physical meaning on a watershed is tried to avoid. The objective of this study is to provide a range of parameters for the flood forecasting model and the intuition about the behavior of the parameters, so the efficiency of flood forecasting is increased.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.2
• /
• pp.104-115
• /
• 1989

In an effort to clarify the wetted patterns of sandy loam soil under trickle irrigation conditions, the distance of wetted zone, infiltration capacity and soil wetted patterns, etc. were measured by gypsum block as soil moisture sensor located every 5 cm vertically and horizontaly in the soil bin under the such conditions as a). irrigation rates set to 2, 4, 6, 8 liters per hour b). total amount of water applied fixed to 14.62 liters per soil bin c) the hearing force of soil measured by plate penetrometer ranging from 1.04 to 1.22kg/cm$_2$ The results can be summarized as follows ; 1. The wetted distance in horizontal direction(H), the wetted distance in vertical direction(D), the horizontal infiltration capacity (iH) and the vertical infiltration capacity(in)could by explained as a function of time t. 2. The horizontal wetted distance (H) is explained by an exponetial function H= a$.$ t where b was found ranging from 021 to 026 under surface trickle irrigation, which was considered a lotlower than the classical value of 0.5 and these measurements were indifferent to the increasing irrigation rates. 3. As for the surface trickle irrigation where horizontal infiltration capacity(iH) is explained as iH = A $.$ t h, the coefficient A increases with respect to irrigation rates within the limits of 0.89~1.34. 4. In terms of surface trickle irrigation of the ratio of Dm Which is maximum vertical wetted distance to Hm, which is maximum horizontal wetted distance, found to be within range of 1.0 to 1.21. It was also noted that the value of Dm decreses when irrigation rates increases while the value of Hm changes the opposite direction. 5. The optimum location of sensors from emitter for surface trickle irrigation should he inside of hemisphere whose lateral radius is 28~30cm long and vertical radius is 10~12cm long. The distance between emitters should be within 60cm long. 6. In the study of vertical wetted distance( D) where D= a $.$ tb, the exponential coefficient b ranged from 0.61 to 0.75 in surface trickle irrigation, and from 0A9 to 0.68 for subsurface trickle irrigation. These measurements showed an increasing tendency to with respect to irrigation rates. 7. In case of vertical infiltration capacity( in), where iD= A $.$ t 1-h, the coefficient A for surface trickle irrigation found to be within range of 0.16 to 0.19 and did not show any relationships with varying degree of irrigation rates. However, the coefficient was varying from 0.09 to 0.22 and showed a tendency to increase vis-a-vis irrigation rates for subsurface trickle irrigation, in contrast. 8. In the observation of subsurface trickle irrigation, it was found that Dm/Hm ratio was within 1.52 to 1.91 and showed a decreasing tendency with respect to increasing rates of irrigation. 9. The location of sensors for subsurface trickle irrigation follows same pattern as above, with vertical distance from emitter being 10~17cm long and horizontal 22~25cm long. The location of emitter should be 50 cm. 10.The relationship between VS which is the volume of wetted soil and Q which is the total amount of water when soil is reached field capacity could be explained as VS= 2.914Q0.91and the irrigation rates showed no impacts on the above relationship.

• Yonsei Medical Journal
• /
• v.59 no.9
• /
• pp.1088-1095
• /
• 2018

Purpose: Post-operative pulmonary function is an important prognostic factor for lung transplantation. The purpose of this study was to identify factors affecting recovery of forced expiratory volume in 1 second (FEV1) at the first year after lung transplantation. Materials and Methods: We retrospectively reviewed the medical records of lung transplantation patients between October 2012 and June 2016. Patients who survived for longer than one year and who underwent pulmonary function test at the first year of lung transplantation were enrolled. Patients were divided into two groups according to whether they recovered to a normal range of FEV1 (FEV1 ${\geq}80%$ of predicted value vs. <80%). We compared the two groups and analyzed factors associated with lung function recovery. Results: Fifty-eight patients were enrolled in this study: 28 patients (48%) recovered to a FEV1 ${\geq}80%$ of the predicted value, whereas 30 patients (52%) did not. Younger recipients [odds ratio (OR), 0.92; 95% confidence interval (CI), 0.87-0.98; p=0.010], longer duration of mechanical ventilator use after surgery (OR, 1.14; 95% CI, 1.03-1.26; p=0.015), and high-grade primary graft dysfunction (OR, 8.08; 95% CI, 1.67-39.18; p=0.009) were identified as independent risk factors associated with a lack of full recovery of lung function at 1 year after lung transplantation. Conclusion: Immediate postoperative status may be associated with recovery of lung function after lung transplantation.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.399-402
• /
• 2005

For efficient and accurate diagnosis of ultrasound images, the time gain compensation (TGC) and dynamic range (DR) control of the ultrasound echo signal are important. TGC is for compensating the attenuation of the ultrasound echo signal along the depth, and DR is used to control the image contrast. In this paper, we propose an algorithm for finding the optimized values of TGC and DR automatically. For TGC, the degree of compensation is determined along the depth based on the effective attenuation estimation of ultrasound signal. For DR optimization, we introduce a novel cost function on the basis of the characteristics of ultrasound image, which provides the minimum value at the optimal DR. Experiments have been performed by applying the proposed algorithm to a real US imaging system. The results show that the algorithm automatically can determine the values of TGC and DR in realtime so that the subjective quality of the corresponding US image may be good enough for diagnosis.

• Journal of Korea Multimedia Society
• /
• v.7 no.9
• /
• pp.1246-1254
• /
• 2004

This paper presents a image coding method that is well adaptive to close-range video transmission because of its low titrate and simple coding procedure. At first, it reduces temporal redundancies by performing image DPCM between previous frame and current frame, and makes wavelet transformed image of this difference image. Then, the coefficients are quantized selectively by using the coefficient values of base level and mid-frequency level because inter-level redundancies are widely exists in multi-resolution images. Finally quantized coefficients are made iron the function that implies the target bitrate, the average coefficient energy, and the value of the level. The proposed method shows the effective Performance in the experiments using the continuous motion images and transition images.