• Korean Security Journal
• /
• no.61
• /
• pp.235-254
• /
• 2019

This study identifies a factor structure regarding the criterion of terror awareness by using confirmatory factor analysis. The study provides information whether the criterion fits in the analysis of terror awareness in Korea or not. Data of 176 public officials working at the National Assembly collected in 「Study on the Improvement of Security in the National Assembly Building」(Choi O-Ho and others, 2016) was used in the analysis. Study results showed the fit statistics of 3 questions regarding concern in terror, 5 questions regarding cognition of terror occurrence, 3 questions regarding countermeasure of terror, and 3 questions regarding equipments against terror satisfied the standard. Also, standard regression coefficient exceeded the standard and was shown to be fit. Concern in terror, as a latent variable, was below the standard value of average variance extracted. However, focused validity was secured by obtaining other values fit. This study proceeded distinct validation test to supplement data. The test results showed that the criterion level was fit. Thus, further survey should include questions that are appropriate to measure the awareness of terror based not only on theories and previous studies but also on questions of terror awareness tested in this study. Such development in surveys will support the means of data measurement.

• The Journal of Korean Society for School & Community Health Education
• /
• v.12 no.2
• /
• pp.13-27
• /
• 2011

Objectives: This study aims to analyze recognition and problems of in Daegu local college students on sexual violence and figure out major factors to prevent sexual violence and to use as necessary basic resources for the improvement of individual and social recognition and effective sexual education. Methods: The Data from 255 students (85%) out of 300 excluding questionnaires with insufficient answers were under analysis using Excel Program and SPSS Win 17.0 for cross-tabulations and correlation analysis. Significance test were performed using $x^2$-test. Results: 1) As to recognition of sexual violence by gender, 88.2%(60) of male and 91.4%(171) of female students conceived the current sexual violence level is hazardous which shows female students had slightly higher recognition. 2) As to recognition of sexual education by gender, both conceived it for equipping proper value system of sex(55.9% of male & 61.5% of female student). 3) As to prevention and coping with sexual violence by gender, 58.8% of male students and 65.2% of female students answered that prevention is possible. 4) As to the correlation between sexual violence factors, it showed positive (+) correlation in the experience of sexual education and the recognition of sexual violence level, in the recognition of sexual violence level and the recognition of sexual violence responsible scope, and in the possibility of sexual violence prevention and the recognition of sexual crime prevention law. 5) As to the recognition and measurement by experience of sexual education, among those who answered the current sexual violence level was hazardous 91.8% had previous sexual education experience and 83.3% had no experience. 6) As to the recognition and measurement of sexual violence by experience of sexual violence (self-determination), those with sexual education experience (79.8%) had little experience in sexual violence than those with not (91.6%). 7) As to the recognition and measurement of sexual violence by the possibility of preventing sexual violence, it showed statistically significant difference in the reason of increase of sexual violence(p<0.01). Conclusions: Accordingly, to provide systematic and sustainable sexual education, individualized education considering gender, individual development rather than standardized group education in its teaching method is necessary, and follow-up evaluation and feed-back system should be implemented to assess achievement and recognition of sexual education.

• International Journal of Quality Innovation
• /
• v.8 no.1
• /
• pp.40-75
• /
• 2007

In the early industrial age which with high intensity of machine and labor, using financial measurement index was good enough to tie in company's mechanization and philosophy of management and been in efficiency. But being comply with "New Economic age," a new economic environment is full of knowledge and information, the enterprise competition had changed from tangible assets, plants to intangible innovation ability of knowledge. As recognizing the new tendency by enterprise, they value gradually the growth and influence from learning. Practice of organization learning not only needs firm structure and be in coordination with both hardware and software, but also needs an affect measurement model to offer enterprise to estimate learning performance. It's a good instrument of financial performance measure mold in the past years, But it's for measuring the past, couldn't formulate enterprise trend to future, hard to estimate investment for future, such as development of products, organization learning, knowledge management etc, as which intangible assets and knowledge ability just the key factors of being win around competition environment in the future. In 1992, Kaplan and Norton brought up Balance Scorecard (BSC) on Harvard Business Review, as an instrument helping enterprise to measure performance, which is being considered to be a most influence management instrument. It added non-financial index such as customer, internal process and learning growth besides traditional financial index, as offering enterprise an index to measure and manage intangible assets and intellectual property. As being aware of organization learning is hard to be ignored in the new economic age, this research is based on learning and growth of BSC, and citing one national material company try to let the most difficult measurement performance of organization learning, to be estimate through BSC, analyze of factor and individual case, to discuss the company how to make the related strategy and vision of organization learning to develop learning and growth of the structure of BSC, subject the matter of out put factors to be discussed, and measure the outcomes as a result of research. The research affect offers (1) the base implement procedure of carrying out BSC; (2) the reference of formulating measurement index while enterprise using BSC to estimate performance of organization learning; (3) the possibility bottleneck maybe forcing while carrying out BSC, to be an improvement or preventive for enterprise.

• The Journal of Internal Korean Medicine
• /
• v.30 no.1
• /
• pp.191-199
• /
• 2009

Objectives : The aim of this study was to evaluate the therapeutic effect of acupuncture and herbal medicine in patients who had hvpoactivity of the gastric vagus nerve and pyloric valve disturbance simultaneously with function dyspepsia by bowel sounds analysis. Methods : Bowel sounds of 10 patients (male 1, female 9) were recorded and their % of bowel sound (%BS) and ratio of dominant frequency (DF) were analyzed before and after treatment. Hypoactivity of the gastric vagus nerve was considered if % BS was <6%. and pyloric valve disturbance was accepted if DF ratio (e.g.. postprandial DF/fasting DF) was <1. Electroacupuncture at Zusanli (ST36, 3Hz, 30 minutes) and manual acupuncture at other meridian points were applied daily for 2 weeks. Herbal medicine, Pyengwi-san. was administered to all patients (100cc, 3 times/day). Results : DF ratio significantly increased from $0.93\pm0.06$ to $1.06\pm0.04$ after treatment for 2 weeks (p=0.005). 9 of 10 patients were improved to DF ratio>1. %BS also increased from $2.97\pm1.17%$ to $4.49\pm4.27%$. not significantly. 3 patients showed a remarkable elevation, and their %BS reached >6% of normal value. Conclusions : Combined effect of electroacupuncture at Zusanli (ST36), manual acupuncture. and Pyengwi-san was shown effective in the improvement of pyloric valve disturbance more than hypoactivity of gastric vagus nerve on patients with functional dyspepsia.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.2
• /
• pp.62-75
• /
• 1986

An experimental investigation of the machining characteristics such as cutt- ing resistance, surface roughness and tool wear in turning the test pieces of SM45C steel with both coated and uncoated carbide tool tips under various cutting conditions was conducted. Also a specially designed simple vibration damping device was experimentally evaluated for its effectiveness on machined surface roughness and a vibration test was conducted to confirm its ability to reduce the amplitude. Based on these tests finding, the following conclusions are made; 1. The cutting resistance($\textrm{p}_{1}$) increases as the depth of cut(d) increases at fixed feed rate(f) over the cutting speed(v) range of 43-226 m/min and p decreses about 18% average when V is increased for fixed d and f. At V= 226m/min, $\textrm{p}_{1}$/for A, C tips are about the same level but $\textrm{p}_{1}$ for B tip is 15% less than A, C tips. 2. The specific cutting resistance(Ks) at V=226 m/min was derived for A, B, C tips respectively and the value of Ks for B rip is about 20% less than A, C tips. 3. The surface roughness(Ra) improves significantly as the cutting speed(V) is increased and this effect was greater when V>100 m/min. On the other hand, Ra deteriorates as the feed rate(f) is increased and this trend was accelerated when f>0.3 mm/rev. With regard to the difference of Ra values among A, B, C tips, at V=226m/min, d=0.4mm, and f=0.31-0.61mm/rev, Ra values for B.C tips are about 17% less than tip A. 4. The experimental tool wear equations were derived for A, B, C tips and from these equations, the tool life($\textrm{T}_{\textrm{L}}$) baced on the I.S.O. criteria was calculated to be $\textrm{T}_{\textrm{L}}$<$\textrm{T}_{\textrm{LB}}$<$\textrm{T}_{\textrm{LC}}$ for both flank wear($\textrm{V}_{\textrm{B}}$) and boundary wear($\textrm{V}_{\textrm{N}}$). Hence, the coated tips are superior to the uncoated tip and tip C is considered to be the best. 5. The cutting resistance may be slightly reduced and the surface rounghness improved when the damper is used especially when V>100 m/min. Therefore this damping device is considered to be effective and practical. The experimental surface roughness equations were also derived. Based on the vibration test, it is established that the surface roughness improvement was the result of amplitude reduction made possible by the damper.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.3
• /
• pp.193-202
• /
• 2003

This study was conducted to investigate the effects of the type and application level of swine manure on herbage productivity, efficiency of nitrogen utilization and environmental pollution by the leaching of nitrogen compounds in mixed grassland. The field experiment was carried out on established grassland sward growing on silt clay loam soil. Main plots were the types of swine manure, such as swine manure fermented with sawdust(SMFWS), swine manure fermented without sawdust(SMF) and swine slurry(SS), and mineral fertilizer(Urea). Subplots were the application levels of swine manure, such as 100, 200 and 400 kgN/ha, The results obtained were summarized as follows; 1. Herbage productivity, nutritive value and nitrogen yields were the highest with mineral fertilizer and followed by swine slurry(SS), and the lowest with swine manure fermented with sawdust(SMFS). As compared with dry matter(DM) yield by application of mineral fertilizer(100%), the DM percents of SMFWS, SMFS and SS were 90.6, 80,9 and 76.8%, respectively. 2. Organic matter(OM) contents of the soil were increased by the applications of swine manure. OM contents were the high set with SMFS and the lowest with mineral fertilizer. 3. The amounts of nitrate leaching by types and application levels of swine manure were the highest in the end of Aug. and early of Sep. during the seasons and ranged from 10 to 25ppm.

• Journal of Nutrition and Health
• /
• v.39 no.2
• /
• pp.91-99
• /
• 2006

This study was conducted to investigate the effects of mulberry fruit, mulberry leaves and silkworm powder with different mixing ratios on hepatic antioxidative system and lipid metabolism in streptozotocin-induced diabetic rats. Sprague-Dawley male rats weighing $100{\pm}10g$ were induced diabetic by 50 mg/kg bw streptozotocin and randomly assigned to following experimental groups; normal diet group (DM), 0.3% and 0.6% mulberry fruit diet groups (F and 2F), 0.3% mulberry leaves diet group (M), 0.3% silkworm powder diet group (S), 0.15% mulberry fruit+0.15% mulberry leaves diet group (FM), 0.15% mulberry fruit+0.15% silkworm powder diet group (FS), 0.1 % mulberry fruit+0.1 % mulberry leaves+0.1% silkworm powder diet group (FMS). The experimental diets were fed for 4 weeks. Hepatic SOD activity was not changed significantly by any of single or combined supplementations of mulberry fruit, leaves and silkworm powder but GSH-px and catalase activities were increased by the groups supplemented with two or three of the test ingredients (FM, FS, FMS) as compared with the DM group. Hepatic TBARS value was not reduced significantly by any of the supplementations but lipofuscin contents were significantly reduced in the FM, FS and FMS groups as compared with the DM group. Hepatic mitochondria and microsomal carbonyl values were reduced by the single and combined supplementations of the test ingredients. Hepatic HMG-CoA reductase activities were increased in the all supplementation groups as compared with the DM group. Hepatic total lipid and triglyceride contents were increased but cholesterol contents reduced in the supplemented groups. The effects on the enzyme activities, peroxide or its products and lipid contents were most remarkable in the FMS group. In conclusion, mulberry fruit, mulberry leaves and silkworm powder have the favorable effects on antioxidative system and lipid metabolism in the diabetic liver and the mulberry fruit, leaves and silkworm powder with equal ratio exert the synergistic effect expectedly to prevent diabetic complications.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.10
• /
• pp.473-478
• /
• 2017

Drones require altitude holding in order to achieve flight objectives. The altitude holding of the drone is to repeat the operation of raising or lowering the drone according to the altitude information being measured in real-time. When the drones are maintained altitude, the drone's altitude will continue to change due to external factors such as imbalance in thrust due to difference in motor speed or wind. Therefore, in order to maintain the altitude of drone, we have to exactly measure the continuously changing altitude of the drone. Generally, the acceleration sensor is used for measuring the height of the drones. In this method, there is a problem that the measured value due to the integration error accumulates, and the drone's vibration is recognized by the altitude change. To solve the difficulty of the altitude measurement, commercial drones and existing studies are used for altitude measurement together with acceleration sensors by adding other sensors. However, most of the additional sensors have a limitation on the measurement distance and when the sensors are used together, the calculation processing of the sensor values increases and the altitude measurement speed is delayed. Therefore, it is necessary to accurately measure the altitude of the drone without considering additional sensors or devices. In this paper, we propose a measurement algorithm that improves general altitude measurement method using acceleration sensor and show that accuracy of altitude holding and altitude measurement is improved as a result of applying this algorithm.

• Asian Journal of Business Environment
• /
• v.1 no.1
• /
• pp.13-20
• /
• 2011

This study is conducted to verify existing differences in consumer attitude according to distributor type and PB product type. Pre-test was conducted for this study in order to select the distributor and to classify the product type, FGI was conducted with 10 graduate students of K university in Kyong-gi. This study survey housewives, office workers, and university students excluding the participants in the pre-test. In the final analysis, research hypothesis is verified through the data of 280 answers in Korea. This research is conducted with a factor design of 3 types of distributors -department store, discount store, convenience store-and 2 types of product -utilitarian product, hedonic product. To verify the hypotheses, ANOVA is carried out. Reliability test of each measurement variables, Cronbach α coefficient is used. For each analysis, SPSS Windows 15.0 statistical program is used. The findings suggest that First, according to the size and characteristics, distributors are classified into department stores, discount stores, and convenience stores and it is verified whether if there are differences in consumers' attitude (product attitude, brand attitude and purchase intention) by the effect of different distributors. Results showed that product attitude is statistically significant. Second, product type is classified by two categories according to whether the product seeks for practicality or emotional pleasure - Utilitarian product and Hedonic product. In this context, the result after verifying whether if there is difference in the attitudes -product attitude, brand attitude, and purchase intention - in accordance with the product types is shown that utilitarian products makes bigger difference compared to hedonic products. Third, it is confirmed that there is interaction effect between product attitude and purchase intention according to the distributer type and product type. However, we find that in terms of brand attitude, there is no interaction effect. The implications of this research is as the following. First, we propose the need of PB product development and marketing strategy, which considers the product types in accordance with the scale and features of each distributor. Second, PB products should break away from the simplicity of standardized products and consider the different features of distributors. Distributors will be in need of a strategy to build a compelling brand that can differentiate itself from other distributors. This will contribute to the improvement in reliability and formation of product value.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.114-123
• /
• 2016

The effective feature extraction method for unmanned aerial vehicle (UAV) detection is proposed and verified in this paper. The UAV engine sound is harmonic complex tone whose frequency ratio is integer and its variation is continuous in time. Using these characteristic, we propose the feature vector composed of a mean and standard deviation of difference value between fundamental frequency with 1st overtone as well as mean variation of their frequency. It was revealed by simulation that the suggested feature vector has excellent discrimination in target signal identification from various interfering signals including frequency variation with time. By comparing Fisher scores, three features based on frequency show outstanding discrimination of measured UAV signals with low signal to noise ratio (SNR). Detection performance with simulated interference signal is compared by MFCC by using ELM classifier and the suggested feature vector shows 37.6% of performance improvement As the SNR increases with time, the proposed feature can detect the target signal ahead of MFCC that needs 4.5 dB higher signal power to detect the target.