• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1388-1398
• /
• 1994

The fracture toughness and micro-fracture mechanisms of the porous glass and stainless fiber reinforced glass composite were evaluated by using the acoustice mission(AE) technique, fracture toughness $test(K_{IC})$ and the macroscopic observation of the specimen surface which was being under the loading. At initial portion of the loading, the AE signals with low energy, of which origins were considered as the micro-cracks formated at the crack tip, were emitted. With increasing the applied load, AE signals having higher energies were generated due to the coalesence of micro-cracks and fast fracture. Based on the such relationship between AE emission and loading condition, fracture toughness $K_{IAE}$ could be defined successfully be using the $K_I$ value corresponding to an abrupt change of the accumulated AE signal energies emitted during the fracture toughness test. In spite of its brittleness of glass material, nonlinear deformation behavior before maximum load was observed due to the formation of micro-cracks. Further, the stainless fiber may have attributed to the improvement of fracture toughness and the resistance to crack propagation comparing to noncomposited materials Finally, models of the micro-fracture process combined with the AE sources for the porous glass material and its composite were proposed paying attention to the micro-crack nucleation and its coalescence at the crack tip. Fiber fracture and its Pullout, deformation of fiber itself were also delinated from the model.

• Composites Research
• /
• v.32 no.6
• /
• pp.342-348
• /
• 2019

Development of flame retarding polymer based materials has been studied actively due to the increase in use of polymers. The post treatment of manufactured fibers or the introduction of flame retardant into fibers is representative method for the way to improve the flame retardancy. Among the polymers, polyacrylonitrile (PAN), which is a precursor of carbon fiber, has been widely used for clothes. Due to low flame retardancy of PAN fiber (LOI value: 17~18%), the improvement of flame retardancy of PAN fiber is needed. In this review paper, we report preparation methods for the fabrication of post-treated (oxidization or chemical reaction) flame-retarding PAN fibers and composites composed of PAN and organic/inorganic materials (SiO₂, 2D materials or CNT).

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.37-42
• /
• 2016

The present study has been performed to examine the feasibility of a flame spread model on the design fire scenario for fire risk analysis. Thermo-Gravimetric analysis and sample burning test were conducted to obtain the material properties of a single couch covered with synthetic leather material and a series of FDS calculations applying with the measured material properties were performed for different grid sizes. The overall fire growth characteristics predicted by the fire model were quite different from the results of a real scale fire test and the initial peak value of the HRR and total released energy showed the results within a 30% discrepancy for the computational grids used in the present study. The current model has some limitations in predicting the fire growth characteristics, such as fire growth rate and the time to the maximum HRR. This study shows that the fire model may be applicable to creating the design fire scenario through continuous model improvement and detailed material properties.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.2
• /
• pp.57-64
• /
• 2012

In this paper, the multi-objective genetic algorithm is proposed for the document clustering which is important in the text mining field. The most important function in the document clustering algorithm is to group the similar documents in a corpus. So far, the k-means clustering and genetic algorithms are much in progress in this field. However, the k-means clustering depends too much on the initial centroid, the genetic algorithm has the disadvantage of coming off in the local optimal value easily according to the fitness function. In this paper, the multi-objective genetic algorithm is applied to the document clustering in order to complement these disadvantages while its accuracy is analyzed and compared to the existing algorithms. In our experimental results, the multi-objective genetic algorithm introduced in this paper shows the accuracy improvement which is superior to the k-means clustering(about 20 %) and the general genetic algorithm (about 17 %) for the document clustering.

• Geomechanics and Engineering
• /
• v.15 no.4
• /
• pp.1005-1016
• /
• 2018

This paper presents an investigation on the properties of two types of cement kiln dust (CKD)-stabilized dredged sediments, silt and clay with a comparison to hydrated lime stabilization. Unconfined compressive strength (UCS) and California bearing ratio (CBR) tests were conducted to examine the optimal stabilizer content and classify the type of highway material. A strength development model of treated dredged sediments was performed. The influences of various stabilizer types and sediment types on UCS were interpreted with the aid of microstructural observations, including X-ray diffraction and scanning electron microscopy analysis. The results of the tests revealed that 6% of lime by dry weight can be suggested as optimal content for the improvement of clay and silt as selected materials. For CKD-stabilized sediment as soil cement subbase material, the use of 8% CKD was suggested as optimal content for clay, whereas 6% CKD was recommended for silt; the overall CBR value agreed with the UCS test. The reaction products calcium silicate hydrate and ettringite are the controlling mechanisms for the mechanical performance of CKD-stabilized sediments, whereas calcium aluminate hydrate is the control for lime-stabilized sediments. These results will contribute to the use of CKD as a sustainable and novel stabilizer for lime in highway material applications.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1201-1207
• /
• 2016

Background: Excessive exposure to the sun during childhood is strongly associated with the development of skin cancer in the future. The only way to prevent the development of skin cancer is to protect against ultraviolet radiation, which can be achieved through strategic awareness during childhood and adolescence. Objective. The aim of this work was to evaluate the impact of educational activities for rural and urban students to promote the use of sunscreens and prevent skin cancer. Materials and Methods: This study was carried out with students (9-12 years) of rural (n=70) and urban (n=70) schools in Rio Grande do Sul state, Brazil. The educational interventions were lectures and games. The impact of this strategy was evaluated through the application of a questionnaire before and after the interventions. Results: Before the intervention, it was found around 50% of rural and urban students were not aware of the damage caused by sun exposure, often exposing themselves to UV radiation without use sunscreen ( ~ 25 %) and at the most critical times of the day/year. After the lectures we observed an improvement in the behavior of the students with regard to sun exposure and knowledge about skin cancer. Conclusions: The results of this study emphasize the importance of prevention strategies for skin cancer and promoting the use of sunscreens based educational strategies. The interventions were of great value in relation to disseminating knowledge on the subject.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.29 no.2
• /
• pp.73-79
• /
• 2018

Objectives: The overuse of the Internet among adolescents has increased dramatically in recent years, leading to pathological or problematic Internet use. Cognitive behavioral therapy (CBT) is known to be effective for the treatment of problematic Internet use, particularly for adolescents. The aim of the present study was to evaluate the therapeutic efficacy of group CBT for problematic Internet use in adolescents. Methods: A total of 17 patients aged 12-17 years who met Young's diagnostic questionnaire criteria of problematic Internet use participated in a school-based eight-session group CBT program. The level of problematic Internet use among participating students was measured using Young's Internet Addiction Scale (IAS). Depression and anxiety levels were evaluated using the Children's Depression Inventory (CDI) and the State-Trait Anxiety Inventory (STAI), respectively. Each construct was assessed at baseline, immediately after the intervention, and at a one-month follow-up visit. Statistical significance was based on a p-value of <0.05. Results: Immediately after the program, the IAS, CDI, and State Anxiety Inventory (SAI) scores were significantly lower than before the program. At the one-month follow-up assessment, the IAS scores remained low, and the CDI and SAI scores were even lower than immediately after the program. Conclusion: Group CBT was effective for adolescents with problematic Internet use, and was also demonstrated to improve depression and anxiety.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.3
• /
• pp.150-157
• /
• 2002

A nonlinear shaping method for a wire antenna is presented to improve the limited pulse radiation ability due to the frequency characteristics with nulls which are found in the conventional straight or V antennas. The developed scheme is based on the minimization of frequency-dependence of the radiated electric field intensity over wide band, hence giving the ripple-type frequency characteristics. It is shown that the synthesized shape has more advantage in the case of shorter pulse. That is, we found that for shorter pulse exciting, the radiated peak value of the synthesized antenna is larger than that of the conventional linear antenna. The inverse discrete Fourier transform based on the moment method is used for the transient analysis of current distribution and far field electric field.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.127-136
• /
• 1998

This paper proposes a new MVQMultistage Vector Quantizer) using a hybrid structure. While in a conventional MVQ, the quantizers of all stages perform the encoding procedure for input signals, we introduce a quantizer that performs selectively. The proposed quantizer with a hybrid structure is composed of a FSVQ(Finite-State Vector Quantizer) for the first stage and a ordinary VQ(Vector Quantizer) for the second stage. A input block is firstly encoded by the FSVQ of the first stage. If the Euclidean distortion measure between original signals and the codevector selected from the state codebook of the FSVQ is less than a prespecified value, only the FSVQ is used for image coding. Otherwise, both the FSVQ of the first stage and the ordinary VQ of the second stage are used for image coding. While the conventional MVQ has an advantage that can achieve low encoding complexity in comparison to the ordinary VQ, but has a disadvantage that is suboptimal with respect to the performance measure and can not achieve the bit rate reduction, the proposed method achieve not only the bit rate reduction but also the performance improvement.

• Journal of Korea Port Economic Association
• /
• v.23 no.3
• /
• pp.127-148
• /
• 2007

Cruise industry in the world has been one of the most prosperous industries for the past 30 years and thus its effect is classified by both economic side incurred from its own tourism industry directly and indirectly, and another economic one from development of related-industries such as shipbuilding, heavy industries, and so on. Under these circumstances, it is evaluated that Korea will have good circumstances of activating the highly value-added cruise industries. In order to do it, this country will have to meet as follows: the significant investment in cruise infrastructure, the organization of North-East Asia cruise council, the building-up of cooperation between government and private, the improvement of cruise-related law and institution, the simplification of entry procedure for cruise tourists, the active development and public relation of cruise tourism industry, and so on.