• Archives of Plastic Surgery
• /
• 제39권2호
• /
• pp.150-153
• /
• 2012

Hemophilia B is a rare blood coagulation disorder. Complications such as bleeding and hematoma can cause necrosis of flaps, wound disruption, and the disturbance of wound healing. In particular, guidelines for flap operations in hemophilia B patients have still not been defined, and case reports are rare. We reconstructed the heel of a 41-year-old male hemophilia B patient using a reverse sural artery flap operation. The patient presented with mild hemophilia, having 27% of the normal value of coagulation factor IX. Coagulation and the changing value of the coagulation factor were regularly measured, and 70% of the normal value of coagulation factor IX was maintained through the injection of recombinant coagulation factors and antihemorrhagics. Hematoma developed twice (postoperative day [POD] 5 and POD 7) and in each case the hematoma was removed. Injections of recombinant coagulation factors and antihemorrhagics were continuously administered until postoperative week 2. When the coagulation factors were within normal ranges. In this article, a hemophilia B patient underwent reverse sural artery flap surgery and the healing progress was analyzed. We conclude that higher than baseline levels of coagulation factors are needed for successful healing in reverse sural artery flap surgery.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.157-160
• /
• 2001

We have investigated the Dielectric and Piezoelectric properties of $xPb(R_{1/2}Ta_{1/2})O_3-(1-x)Pb(Zr_{0.52}Ti_{0.48})O_3$ (R=Al,Y) solid solutions in which R ions are substituted for Al and Y ions. The maximum value of electromechanical coupling factor kp of 55% and 51% were obtained at the composition of 5mol% PAT and 5mol% PYT. However mechanical quality factor$(Q_m)$ had a minimum value of 44 and 69 at the composition of 5mol% PAT and 5mol% PYT. Also, the maximum value of piezoelectctric constant of $d_{33}(329[pC/N])$ and $d_{33}(310[pC/N])$ were obtained at the composition of 5mol% PAT and 5mol% PYT.

• 한국생활과학회지
• /
• 제7권2호
• /
• pp.63-73
• /
• 1998

To get well-fitted ready-made clothings with beautiful silhouettes, it's better to classify body forms into several forms and to assign sizing within each form than to grade just based on body size regardless of body styles. This study illucidated the importance of drop value in the results of surveying the current values of sizing and grading. Therefore, it's meaningful to get the classification of body form with appropriate distribution of drop values of the body, and the distribution of drop value and the frequency of each form is very helpful to name the combined sizing or coverage of ready-made clothes. This study aimed at classifying body forms with various drop values using multivariate analysis for sizing and grading. Factor analysis and cluster analysis were done using measured values from 346 unmarried women. The results are as follows: 1. The factor which explains body forms was obtained by factor analysis, and the representative major 18 items which have important roles in classifying body forms were selected among the measured values with high factor loading and communality. 2. The body forms were classified into 8 groups based on the charateristics, frequencies and distributions of them obtained from cluster analysis. 3. Each classified body form showed conspicuous difference in drop value and the difference of body form mainly resulted from the difference between waist and hip rather than the difference between bust circumference and waist in Korean unmarried women.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.419-422
• /
• 2000

This paper was to measure the structure, piezoelectric properties of 0.05Pb($A1_{0.5}$$Nb_{0.5}$)-0.95Pb($Zr_{0.52}$$Ti_{0.48}$)$O_3$ ceramics dopped with additive after creating the specimens with a general method. It is shown that X-ray diffraction pattern variation of lines (200) have tendency to move in simple peak by addition of additive. According to the increase of $Cr_2$$O_3$, tetragonality hardly have variation, according to the increase of $Fe_2$$O_3$, tetragonality decreased on the whole. According to dopping with $Cr_2$$O_3$ and $Fe_2$$O_3$, electromechanical factor(kp) largely increased, in case of sintering at $1200^{\circ}C$ kp was maximum value of 40.04[%] at $Cr_2$$O_3$ 0.3wt%, and maximum value of kp 42.9 [%] at $Fe_2$$O_3$, 0.9wt%. In case of sintering at 120$0^{\circ}C$, mechanical duality factor(Qm) was maximum value of Qm 268.8 at $Cr_2$$O_3$, 0.9 wt%.

• 한국한의학연구원논문집
• /
• 제18권2호
• /
• pp.139-149
• /
• 2012

Objectives : This is the study to understand of the pulse wave factor according to BMI and period of sterility on female, and to confirm the relationship of pulse wave factor among left and right inch, bar and cubit. Methods : The Questions and measurement of the pulse wave were operated with subjects(76 sterile females using on public health center). The measurement of the pulse wave was operated in 6 part of left and right inch, bar and cubit. The pulse wave was prior measured in part of left bar (i.e. interior pulsation part of radial process styloides in left hand), and next was measured in part of left inch and bar. And the pulse wave was operated samely in part of right inch, bar and cubit. Results : The results were as follows. The pulse energy of 6 part of left and right inch, bar and cubit was showed statistical significance and decreased in order of left inch, right inch, left cubit, right cubit, left inch, right bar. The left and right inch and cubit were showed numerical value of normal range, but left and right bar were showed lower pulse eneregy than normal range. Also left and right cubit were showed lower than left and right inch, and higher than left and right bar. In BMI, The pulse energy of left and right inch, cubit and the average of right hand was not showed statistical significance in the range of low-weight, normal, over-weight and obesity. But in the left and right bar and the average of left hand, the pulse energy of over-weight and obesity group were showed significantly higher than low-weight group. And the pulse wave factor was divided the pattern of h1 showing high numerical value in inch (Ap, As, Aw) and the pattern of Wm showing high numerical value in bar and cubit (RAI, Ad) Conclusions : The low pulse energy of bar was significant observation on the setting of oriental medical diagnostic index on sterilitas. Also, in the numerical value pattern of diverse pulse wave factor, it was divided the pattern of high numerical value in inch and the pattern of high numerical value in bar and cubit. On this, we think that the studies need in the future.

• Structural Engineering and Mechanics
• /
• 제15권3호
• /
• pp.331-344
• /
• 2003

The plane contact problem for two infinite elastic layers whose elastic constants and heights are different is considered. The layers lying on a Winkler foundation are acted upon by symmetrical distributed loads whose lengths are 2a applied to the upper layer and uniform vertical body forces due to the effect of gravity in the layers. It is assumed that the contact between two elastic layers is frictionless and that only compressive normal tractions can be transmitted through the interface. The contact along the interface will be continuous if the value of the load factor, ${\lambda}$, is less than a critical value. However, interface separation takes place if it exceeds this critical value. First, the problem of continuous contact is solved and the value of the critical load factor, ${\lambda}_{cr}$, is determined. Then, the discontinuous contact problem is formulated in terms of a singular integral equation. Numerical solutions for contact stress distribution, the size of the separation areas, critical load factor and separation distance, and vertical displacement in the separation zone are given for various dimensionless quantities and distributed loads.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.562-567
• /
• 2010

A One-Dimensional Water Flow and Contaminant Transport in Unsaturated Zone (FTUNS) code has been developed in order to interpret radionuclide migration in an unsaturated zone. The pore-size distribution index (n) and the inverse of the air-entry value ($\alpha$) for an unsaturated zone were measured by KS M ISO 11275 method. The hydraulic parameters of the unsaturated soil are investigated by using soil from around a nuclear facility in Korea. The effect of hydraulic parameters on radionuclide migration in an unsaturated zone has been analyzed. The higher the value of the n-factor, the more the cobalt concentration was condensed. The larger the value of $\alpha$-factor, the faster the migration of cobalt was and the more aggregative the cobalt concentration was. Also, it was found that an effect on contaminant migration due to the pore-size distribution index (n) and the inverse of the air-entry value ($\alpha$) was minute. Meanwhile, migrations of cobalt and cesium are in inverse proportion to the Freundich isotherm coefficient. That is to say, the migration velocity of cobalt was about 8.35 times that of cesium. It was conclusively demonstrated that the Freundich isotherm coefficient was the most important factor for contaminant migration.

• 한국전기전자재료학회논문지
• /
• 제11권5호
• /
• pp.413-417
• /
• 1998

In this paper, we investigate frequency dependance of inductance of FeCoB amorphous magnetic films. $(Fe_{1-x}Co_x)_{79}Si_2B_{19}$ was used as the basic composition of amorphous magnetic film having near zero magnetostriction. The amorphous magnetic films were fabricated with x=0.94 and x=0.95 by using sputtering method at high frequency. The films were anneald under non-magnetic field and near crystallization temperatures(30min at $280^{\circ}C$, 30min and 1hr at $400^{\circ}C$, respectively). As the results of the experiments with the fabricated films, the lowest coercive force was 0.084[Oe] at 400[W] of the input power and the crystallization temperature was $360^{\circ}C$ . In the case 30min at 40$0^{\circ}C$ the inductance value in the low frequency with x=0.95 was higher by 488% than that with x=0.94. The quality factor Q was below 0.7 for all samples. We obtained the highest quality value at 400[KHz] with 30min at $280^{\circ}C$ and x=0.94. The value was about 0.62. Also, the quality factor value was about 0.35 at 1[MHz] with 30min at $280^{\circ}C$ and x=0.95.

• 산경연구논집
• /
• 제13권2호
• /
• pp.33-43
• /
• 2022

Purpose: To examine the strength of social capital (SC) that are likely to affect Created share value (CSV) factors. This research aims to conduct a literature review to establish the components of SC and CSV identified within educational research and use factor analysis to identify how numerical values differ from the average and the amount of variance expressed in eigenvalue and factor score. Research design, data and methodology: To achieve the purpose of the study and provide adequate empirical results, we conducted the structural equation analysis using IBM AMOS 24.0 and collect online questionnaires from top practitioners, managers and non-managerial employees in Korean education firms, which will be used to conduct a factor analysis to assess SC's effect on CSV. Results: Final analysis of the path coefficient of the research model indicated that the SC values based on six have a significantly positive (+) effect on CSV values based on three categories (β=.35, p<.001). Therefore, the current research accepts the hypothesis in determining that SC can enhance the impact of CSV in educational companies. Conclusions: From the study, the practitioners of education companies should make more efforts to find action plans to create corporate social responsibility and shared value, which are required throughout society.

• 한국의상디자인학회지
• /
• 제20권2호
• /
• pp.17-29
• /
• 2018

This study aims to determine the effects of clothing consumption value, usefulness of clothing and ease of use on the new product acceptance intention of premium linen apparel. A survey was conducted among male and female consumers, and a total of 328 responses were analyzed. Frequency, factor analysis, and multiple regression analysis were used for data analysis using SPSS WIN Ver.21.0. The results of this study are as follows. First, clothing consumption value was classified into five factors: social value, fashionable value, individual value, practical value and emotional value. Usefulness and ease of use were found two factors and the new product acceptance intention of premium linen apparel was found one factor. Second, all factors of clothing consumption value had a positive effect on usefulness. The higher the values of the five factors of clothing consumption value, the higher usefulness. Third, fashionable value affected ease of use, but individual value had no positive effect on ease of use. The higher the fashionable value, the higher the ease of use, but, the higher the individual value, the lower the ease of use. Fourth, all factors of clothing consumption value had a positive effect on the new product acceptance intention of premium linen apparel. Therefore, clothing consumption value is important to the new product acceptance intention of premium linen apparel. Moreover, usefulness and ease of use influenced the new product acceptance intention of premium linen apparel. This shows that consumers' new product acceptance intention of premium linen apparel increases if the product is they are perceived to be useful and easy to use.