• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.786-794
• /
• 2011

To investigate the sanitary-quality level of commercial kimchi in South Korea, the pH, acidity, and microbial-flora changes in the kimchi were determined. Samples of kimchi produced by three different manufacturers (a small grocery store, a small/medium-sized enterprise, and a large food company) were collected. Freshly made kimchi was purchased and fermented at $10^{\circ}C$ for 10 days. The pH of the commercial kimchi on the purchased day was approximately pH 5.8, and that on the $10^{th}$ day of fermentation was ${\simeq}pH$ 4.1. The kimchi purchased from a large company showed a more rapid decline in pH level during fermentation. The saltiness of the kimchi purchased from a medium-sized company was slightly higher than those of the other commercial kimchi samples. The saccharinity index of the kimchi produced by a small grocery store was higher than those of the other samples, and its value deviation was also higher than those of the other commercial kimchi samples. A higher total viable-cell count and a higher lactic-acid bacteria (LAB) count were detected in the kimchi from the large food company at the beginning of fermentation compared to the samples of the two other kimchi manufacturers. The highest cell numbers of gram-positive bacteria (except LAB) and coliform bacteria were detected from the small-grocery-store kimchi, but the coliform bacteria count gradually decreased during fermentation although such bacteria were still detected until the $10^{th}$ day of fermentation. In contrast, coliform bacteria were not detected in the samples from the medium-sized and large food companies. Yeast, which is detected in over-ripened kimchi, was detected in the unfermented kimchi from the small grocery store, which had a below-0.36% acidity level. The gram-positive bacteria (except LAB) that were detected in all the tested commercial kimchi samples were determined to be Bacillus spp., and the gram-negative bacteria were determined to be Escherichia coli, Enterobacter spp., Sphingomonase spp., and Strenophomonas spp. The proportions of all the aforementioned bacteria in the kimchi samples, however, were different depending on the samples that were taken. These results indicate that a more sanitary kimchi production process and a more systematic kimchi production manual should be developed to industrialize and globalize kimchi.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.898-907
• /
• 2017

This study was aimed to test harvest time effect with polyethylene (PE) film liner, 1-methylcyclopropene (1-MCP) and aminoethoxyvinylglycine (AVG) treatments on fruit quality attributes in 'Sangjudungsi' persimmon fruit during cold storage. The fruits were harvested 10 days earlier in 2016 than the mature harvest time in 2015. The ethylene production was significantly lower in early harvested fruits than in mature harvested ones. Flesh firmness was maintained higher in 1-MCP treated fruit than in other treatments during cold storage. The rate of fruit weight loss was significantly inhibited by PE film liner treatment during storage, regardless of harvest time. 1-MCP treatment showed less change in fruit peel color variables ($L^*$ and $b^*$) from the calyx-end and equatorial regions during cold storage, compared with those from the control and PE film treatments. The incidence rate of fruit decay and softening was higher in PE film treated fruits than in the other treatments. However, there was no decay detected in AVG treated fruit. The early harvested fruits were maintained higher flesh firmness, compared with mature harvested fruits. Nevertheless, the mature harvested fruits showed much higher soluble solids content, the redness (Hunter a value) of the fruit peel and respiration rate, compared with early harvested fruits. Furthermore, the rate of weight loss in the fruit was remarkably inhibited in the PE film treatment.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.206-214
• /
• 2017

The objective of this study is to investigate the quality characteristics of Yanggaeng by using the functional properties of Glechoma hederacea (GH). Sample was dried at $50^{\circ}C$ dry oven. The results of the study were as follows : The Phenolic compounds of GH was $12.99{\pm}0.3mg/g$ in water extract (GHWE), $3.14{\pm}0.07mg/g$ in 70% ethanol extract (GHEE). The antioxidant activity of GH was determined in various phenolic concentrations at $50-200{\mu}g/mL$. DPPH activities of GHWE and GHEE were 77.16-78.24% and 73.04-77.00%, respectively. The ABTS were 84.35-99.75% and 83.74-99.55%. The anti-oxidant protection factor (PF) were 1.54-1.62 PF and 1.62-2.09 PF and TBARS were 42.93-94.09% and 91.05-95.19%, respectively. Tyrosinase inhibitory activity of GHEE increased concentration dependently. Hyaluronidase inhibition activity of GHEE and GHWE, showing that there were increasing pattern depending on the increases in the phenolics concentration of GH. In texture, Hardness and springiness were significantly different in the control and 2% groups, but cohesiveness and chewiness did not show any significant difference. In color, L value decreased in proportion to concentration, and a and b values did not change. Sensory characteristics showed that the 1% group had the highest score and the 2% group had the lowest score. Thus, when the GHP Yanggaeng was prepared, in consideration of its sensory characteristics, and at appropriate concentration on below 1%.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.1
• /
• pp.45-54
• /
• 2017

The characteristics of the rock cleavage in Jurassic Geochang granite were analysed using the distribution of microcrack lengths and spacings. The phases of distribution of the above lengths and spacings were derived from the enlarged photomicrographs(${\times}6.7$) of the thin section. First, the length and spacing-cumulative diagrams for the six directions of rock cleavages were arranged in increasing order($H2{\rightarrow}R1$) on the density(${\rho}$) of microcrack length. The various parameters were extracted through the combination of the above two types of diagrams. The discrimination factors representing the three quarrying planes and three rock cleavages were acquired through the mutual contrast between the values of parameters. The analysis results of the research are summarized as follows. The evaluation for the six directions of rock cleavages was performed using the parameters such as (1) intersection angle(${\alpha}-{\beta}$) and (2) exponent difference(${\lambda}_S-{\lambda}_L$) between two exponential straight lines related to spacing(${\alpha}$, ${\lambda}_S$) and length(${\beta}$, ${\lambda}_L$). The values of parameters(1 and 2) are in order of H(hardway, (H1 + H2)/2) < G(grain, (G1 + G2)/2) < R(rift, (R1 + R2)/2). On the contrary, the values of the above two parameters for three planes are in order of R < G < H. Meanwhile, the direction of convergence between two exponential straight lines was derived. The above direction is compliant to arrangement of the line os' centering around the line ol. The above two lines converge in the direction of the Y-axis when the line ol and line os' occupy the upper region on the left and the lower region on the right, respectively(R-type). On the contrary, the above two lines converge in the direction of the X-axis when the order of arrangement between line ol and line os' is reversed(H-type). Especially, the positive(+) or negative(-) value of intersection angle(${\alpha}-{\beta}$) is determined by the arrangement of two vertical lines. This type of correlation analysis is useful for evaluating the relative strength of rock cleavage and discriminating three quarrying planes.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.3
• /
• pp.297-309
• /
• 2017

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. The comprehensive evaluation for rock cleavages was performed through the combination of the 16 parameters derived from the enlarged photomicrographs of the thin section and the spacing-cumulative frequency diagrams. The results of analysis for the representative values of these spacing parameters with respect to the rock cleavage are summarized as follows. First, the above parameters can be classified into group I (spacing frequency (N), total spacing ($1m{\geq}$), constant (a), exponent (${\lambda}$), slope of exponential straight line (${\theta}$), length of line (oa') and trigonometric ratios ($sin{\theta}$, $tan{\theta}$) and group II (mean spacing (Sm), difference value between mean spacing and median spacing (Sm-Sme), density (${\rho}$), lengths of lines (oa and aa'), area of a right-angled triangle (${\Delta}oaa^{\prime}$) and trigonometric ratio($cos{\theta}$). The values of the 8 parameters belonging to group I show an order of H(hardway, H1+H2)

• Korean journal of food and cookery science
• /
• v.32 no.4
• /
• pp.390-399
• /
• 2016

Purpose: The objective of this study was to examine the effect of plant scale and cooking conditions on the quality characteristics of sausages during refrigerated storage. Methods: Sausages used in this study were classified into two groups: those submitted to $1^{st}$ cooked treatments and those submitted to $2^{nd}$ cooked treatments. The pH, volatile basic nitrogen (VBN), gas production ratio, and microorganisms were measured in triplicate. Results: The change of quality in the products was assessed every 7 days by measuring pH, VBN levels, total microbes, coliform bacteria, Escherichia coli, and pathogenic bacteria in the products. Pathogenic bacteria such as Staphylococcus aureus, Listeria monocytogenes, Clostridium perfringens, and E. coli were not detected in the sausages with $1^{st}$ cooked treatments. The results showed that the pH of the sausages decline as storage time increased. The pH value of the sausages with $2^{nd}$ cooked treatments changed gradually. VBN levels were generally lower in products with $2^{nd}$ cooked treatments than in those with $1^{st}$ cooked treatments, but they varied with the type of products. On the $35^{th}$ day, the number of total microbes ranged between 6.13-7.12 log CFU/g in products with $1^{st}$ cooked treatments and 3.44-6.92 log CFU/g in products with $2^{nd}$ cooked treatments, showing fewer bacteria in the latter products. Conclusions: $1^{st}$ cooked treatments were effective in microbial control, but $2^{nd}$ cooked treatments could prolong the shelf life of the sausages, indicating a need for differential management of each product.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.3
• /
• pp.171-178
• /
• 2013

In this study, the sludge that occurs in the initial operation of coagulation system developed for the treatment of CSOs were returned to the flocculation reactor. The purposes of this study were to analyze the Characteristics of flocs that are generated through the recycling sludge and settling characteristics of sludge, and to evaluate the possibility that high concentrations of particulate matter in the initial inflow of CSOs could be used as an weighted coagulant additive. As a result, the concentration of treated CSOs pollutants at the beginning of the CSOs influent with a large amount of particulate matter over 20 ${\mu}m$ was low, after gradually increasing the concentrations of them. The flocs generated from the sludge return were similar in size compared to flocs generated through injection of micro sands, and settling velocity in case of return sludge injection was decreased from 55.1 cm/min to 21.5 cm/min. SVI value of the sludge accumulated at the bottom of the sedimentation tank was 72, and settled sludge volume decreased rapidly due to the consolidation of sludge to the time it takes to 10 minutes. these mean that sludge used for recycling has good settling characteristic. A condition of returned sludge which is 0.1% return of 0.3% extraction was formed in the balance of settlement and extraction. In this case, This condition was to be adequate to maintain the proper concentration such as 100~200 mg/L of TS and 50~100 mg/L of VS in the flocculation reactor. The usage of the return sludge containing particulate matters of CSOs as an weighted coagulant additive was able to secure a stable treated water quality despite the change of influent water quality dynamically. Furthermore, it can be expected to reduce the alum dosage along with the sludge production.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.537-545
• /
• 1995

Quality changes of lettuce were studied during storage to investigate the efficiency, cooling properties and the washing and storage effects of immersion-type hydrocooling. As a result of plotting the nondimensionalized lettuce temperature versus cooling time, its cooling rate coefficient was shown to be $-0.365\;min^{-1}{\sim}-0.255\;min^{-1}\;(R^2=0.99{\sim}0.88)$. Rate of weight loss was not significantly (p>0.05) different between lettuces with various treatment conditions during storage at $5^{\circ}C$. However, during storage at $15^{\circ}C$, weight loss of hydrocooled lettuce was lower than that of non-treated lettuce after from 10 to 15 days. Especially, The lettuce packed with PE was more effective than that packed with try in terms of packing condition after hydrocooling. Lettuce pretreated with sterilizing agent, packed with PE vinyl film, removed residual water after hydrocooling had lower decaying rate than any other lettuces. Changes of L and b values in hydrocooled lettuce were slower than those of non-treated one. During changes of chlorophyll content, the initial value, $115.7{\sim}147.3\;mg%$ was decreased to $50{\sim}60%$ after 25 days of storage at $5^{\circ}C$ and within 15 days of storage at $15^{\circ}C$. It could be presumed that the addition of sterilizing agent reduced the initial level of overall total and coliform count and its growth rate during storage. The respiration rate of hydrocooled lettuce at $5^{\circ}C$ was $23.95\;mg{\cdot}CO_2/kg\;hr$, which is 10% of those of non-treated lettuce.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.729-733
• /
• 2005

This study was conducted to sanitize fried-frozen cheese ball by gamma irradiation. Total aerobic bacteria and yeasts and molds counts were 4.4 and 2.8 log CFU/g in non-irradiated sample, respectively. Microorganisms were decreased with increase of irradiation dose $(D_{10}=1.25\;kGy)$, and were not detected in samples irradiated at 3 kGy or more $(<10^2\;CFU/g)$. $D_{10}$ value for Escherichia coli (KCTC 1682) was 0.25 kGy. TBA (2-thiobarbituric acid) values were increased as irradiation dose was increased, but there was no significant difference between non-irradiated and irradiated samples at 3 kGy or less (p<0.05). The results of sensory evaluation showed that there was no significant difference between non-irradiated and irradiated samples at 3 kGy or less, the sensory scores were decreased with irradiation at 5 kGy or more (p<0.05). These results indicated that gamma irradiation at 3 kGy was considered to be an effective treatment to ensure the microbiological safety of fried-frozen cheese balls without any sensorial change, even though further studies should be investigated to reduce detrimental effects induced by irradiation.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.39-46
• /
• 1977

In the analysis of variance between population and between individual trees (families), the fluctuation of values of variances due to sample size, (number of family) was analysed by two different designs, i.e. 2-level nested design with equal sample size and randomized complete block design. The variables were seedling heights and root calipers of 1-0 and 1-1 seedlings of Pinus densiflora S. et Z. The details of three natural stands and their progeny characters were presented in previous reports. 1. In nested design analysis. increase of sample size resulted the decrease of F-values among families in general, however, the F-values among populations showen the increasing tendency. The smaller the sample size, the larger the F-values fluctuation was resulted in general. At the point of beyond sample size 10, however, the fluctuation become to be stabilized. The F-value fluctuation seemed to be more in the case of analysis with random sampling method than with sequentially accumulated sampling method. And also such a tendency was more obvious in smaller sample size than in large one. 2. In R.C.B.D. analysis, the sample size to affirm the family variation was smaller than that for population variations.