• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.11
• /
• pp.3516-3524
• /
• 1996

Service conditions for structures at elevated temperatures in nuclear power plant involve transient thermal and mechanical load levels that are severe enough to caeuse inelastic deformations due to creep and plasticity. Therefore, a systematic mehtod of inelastic analysis is needed for the design of structural components in nuclear poser plants subjected to such loading conditions. In the present investigation, the Chabodhe model, one of the unified viscoplastic constitutive equations, was selected for systematic inelastic analysis. The material response was integrated based on GMR ( generallized mid-point rule) time integral scheme and provided to ABAQUS as a material subroutine, UMAT program. By comparing results obtaned from uniaxial analysis using the developed UMAT program with those from Runge-Kutta solutions and experimentaiton, the validity of the adopted Chaboche model and the numerical stability and accuracy of the developed UMAT program were verified. In addition, the developed material subroutine was applied for uniaxial creep and tension analyses for the plate with a hole in the center. The application further demonstrates usefulness of the developed program.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.2
• /
• pp.89-96
• /
• 2020

In this study, we developed a finite element model for the built-in bottom-freezer type refrigerator and then used the structural analysis method to analyze and evaluate the deflection of the doors. We tested the validity of the developed analytical model by measuring the deflection of the hinge when loads were applied to the upper and lower hinges of the refrigerating compartment and compared these with the analysis results. The comparison of the vertical displacement of the measured result and the analysis result showed an error ratio of up to 12.8%, which indicates that the analytical model is consistent. Using the analytical model composed of the cabinet, hinges and doors, we performed analyses for two cases: both doors closed, and the refrigerating door open. Since the maximum vertical displacement of the refrigerating compartment door (R-door) with the food load is smaller than the gap between the lower surface of the R-door and the upper surface of the freezer compartment door (F-door), it is judged that the R-door and the F-door do not contact when the doors are opened or closed. In addition, the analysis result showed that the difference between the vertical displacement at the hinge on the opposite side and the hinge side of the R-door is favorably smaller than the management criterion of the refrigerator manufacturer.

• Korean Journal of Organic Agriculture
• /
• v.27 no.3
• /
• pp.271-288
• /
• 2019

It has continuously promoted to scale up the agricultural management body in order to cope with the market-opening pressure such as the UR negotiation, the DDA negotiation, and more conclusions of FTAs and to enhance the competitiveness of our agriculture. This study evaluated the factors associated with production organization participation centered on environmentally-friendly agriculture farmers in order to improve the production efficiency of environmentally-friendly agriculture in the aspect of production. In order to achieve this objective, this study evaluated the factors that contributed to participating in an organization using the bivariate probit model focusing on environmentally-friendly agriculture farmers in Chungnam. This study examined the validity and reliability of the study model through exploratory factor analysis. The results of factor analyses identified four factors: "distribution", "production", "organization operation", and "social capital". The results of the bivariate probit model showed that distribution significantly affected production activities and distribution, organization operation, agricultural income, and gender significantly influenced sale activities. Environmentally-friendly production organization had not been able to provide the productive support that was needed for local farmers to produce environmentally-friendly agricultural products in a region. Additionally, farming education did not provide the information needed by the farmers. Although producers had a network within a production organization, it was operated mainly for administrators. Therefore, participants felt somewhat lacking. This study identified the level of organization of producer organizations in Chungnam area, where environmentally-friendly agriculture is well activated. This study suggested implications for future production organization participation by evaluating factors affecting participation quantitatively.

• Steel and Composite Structures
• /
• v.36 no.3
• /
• pp.321-337
• /
• 2020

Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable dismantling of elements for their potential reuse at the end of life of buildings. Bolted shear connector with mechanical coupler is presented in this paper. The connector is assembled from mechanical coupler and rebar anchor, embedded in concrete, and steel bolt, used for connecting steel to concrete members. The behaviour and ultimate resistance of bolted connector with mechanical coupler in wide and narrow members were analysed based on push-out tests and FE analyses conducted in Abaqus software, with focus on concrete edge breakout and bolt shear failure modes. The effect of concrete strength, concrete edge distance and diameter and strength of bolts on failure modes and shear resistance was analysed. It was demonstrated that premature failure by breakout of concrete edge occurs when connectors are located 100 mm or closer from the edge in low-strength and normal-strength reinforced concrete. Furthermore, the paper presents a relatively simple model for hand calculation of concrete edge breakout resistance when bolted connectors with mechanical coupler are used. The model is based on the modification of prediction model used for cast-in and post-installed anchors loaded parallel to the edge, by implementing equivalent influence length of connector with variable diameter. Good agreement with test and FE results was obtained, thus confirming the validity of the proposed method.

• Journal of Agricultural Extension & Community Development
• /
• v.4 no.1
• /
• pp.305-315
• /
• 1997

The propose of this study was to analyze the relationships among the levels of training & development evaluation (reaction, learning, transfer). The study has been conducted on 730 trainees who attended in the basic accounting program in L training and development institution through three incidents of tracked research such as reaction survey right after the conclusion of training, learning evaluation through test, and an evaluation of the transferability after 3 months of training. Questionnaires and test papers for analyses were used after their reliability, validity, difficulty, and discrimination have been verified on a pre-test. The research has been conducted for six months from 4 March 1996 to the end of August 1996, and data have been collected through direct research and survey through mail. The collected data have been worked on at SAS program for Windows with a statistical significance level of 5%. Statistical method that had been used was Pearson's correlation coefficient. The result and conclusion acquired from this study were as follows: Between reaction and learning, learning and transfer of training, only a weak positive correlation exists and explanation or prediction variance showing hierarchical relationship was quite weak with 1%. Thus, this research not only does not strongly support Kirkpatrick(1976)'s hierarchical model of $reaction{\rightarrow}learning{\rightarrow}transfer$, but also indicates that the separate measurement on each levels of training evaluation needs to be done. On the other hand, there was a relatively strong positive correlation between reaction and transfer of training. Based on the result, the conclusion, and the restriction perceived through this study, the following suggestions were made. 1. There is a need to empirically analyze and verify the hierarchy of all levels of training evaluation including the evaluation of the fourth level (result) such as organizational productivity, organizational satisfaction, and separation rate. 2. A great deal of efforts will be needed to systematically analyze what the relationships are among the methods measuring the level of evaluation of the training and development, and to apply this result to the training field.

• Journal of the Korean Magnetics Society
• /
• v.23 no.3
• /
• pp.110-116
• /
• 2013

This paper proposes a sampling-based sensitivity method for dealing with electromagnetic coupled design problems effectively. The black-box modeling technique is basically applied to obtain an optimum regardless of how strong the electromagnetic, thermal and structural analyses are coupled with each other. To achieve this, Kriging surrogate models are produced in a hyper-cubic local window with the center of a current design point. Then design sensitivity values are extracted from the differentiation of basis functions which consist of the models. The proposed method falls under a hybrid optimization method which takes advantages of the sampling-based and the sensitivity-based methods. Owing to the aforementioned feature, the method can be applied even to electromagnetic problems of which the material properties are strongly coupled with thermal or structural outputs. To examine the accuracy and validity of the proposed method, a strongly nonlinear mathematical example and a coil design problem for local induction heating are tested.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.635-641
• /
• 2016

Because of prohibitive data storage requirements in large-scale simulations, the memory problem is an obstacle for Monte Carlo (MC) codes in accomplishing pin-wise three-dimensional (3D) full-core calculations, particularly for whole-core depletion analyses. Various kinds of data are evaluated and quantificational total memory requirements are analyzed based on the Reactor Monte Carlo (RMC) code, showing that tally data, material data, and isotope densities in depletion are three major parts of memory storage. The domain decomposition method is investigated as a means of saving memory, by dividing spatial geometry into domains that are simulated separately by parallel processors. For the validity of particle tracking during transport simulations, particles need to be communicated between domains. In consideration of efficiency, an asynchronous particle communication algorithm is designed and implemented. Furthermore, we couple the domain decomposition method with MC burnup process, under a strategy of utilizing consistent domain partition in both transport and depletion modules. A numerical test of 3D full-core burnup calculations is carried out, indicating that the RMC code, with the domain decomposition method, is capable of pin-wise full-core burnup calculations with millions of depletion regions.

• Journal of Korean society of Dental Hygiene
• /
• v.20 no.2
• /
• pp.175-187
• /
• 2020

Objectives: The purpose of this study was to investigate the opinions of Korean dental hygienists on the Korean advanced dental hygienist system in Korea. Methods: The survey was conducted on 328 dental hygienists working at dental clinics and hospitals in Seoul, Gyeonggi-do, Incheon, and Chungcheong-do. Collected data were analyzed with the frequency analysis, independent-samples t-test, and one-way analysis of variance after their reliability and validity were verified through the reliability, exploratory factor, and confirmatory factor analyses. Results: Respondents preferred sectoral advanced dental hygienists to integrated advanced dental hygienists, but 47.0% of respondents did not respond to this questionnaire item. To become an advanced dental hygienist, 'more than 5 years but less than 8 years' of clinical experience was appropriate according to 45.7% of the respondents and 'more than 30 h but less than 40 h' of training period was appropriate according to 25.9% of the respondents. Respondents thought that the duration of the training period for advanced dental hygienists would be directly proportional to expectations from the effect of advanced dental hygienists (p=0.023). Further, respondents who were usually interested in advanced dental hygienists showed higher expectations from the role (p<0.001) and effect (p<0.001) of advanced dental hygienists than those who were not interested. Conclusions: This study suggests various implications of the introduction of the advanced dental hygienist system in Korea.

• Structural Engineering and Mechanics
• /
• v.27 no.4
• /
• pp.477-499
• /
• 2007

The main purpose of this paper is to investigate the ultimate behavior of steel cable-stayed bridges with design variables and compare the validity and applicability of computational methods for evaluating ultimate load capacity of cable-stayed bridges. The methods considered in this paper are elastic buckling analysis, inelastic buckling analysis and nonlinear elasto-plastic analysis. Elastic buckling analysis uses a numerical eigenvalue calculation without considering geometric nonlinearities of cable-stayed bridges and the inelastic material behavior of main components. Inelastic buckling analysis uses an iterative eigenvalue calculation to consider inelastic material behavior, but cannot consider geometric nonlinearities of cable-stayed bridges. The tangent modulus concept with the column strength curve prescribed in AASHTO LRFD is used to consider inelastic buckling behavior. Detailed procedures of inelastic buckling analysis are presented and corresponding computer codes were developed. In contrast, nonlinear elasto-plastic analysis uses an incremental-iterative method and can consider both geometric nonlinearities and inelastic material behavior of a cable-stayed bridge. Proprietary software ABAQUS are used and user-subroutines are newly written to update equivalent modulus of cables to consider geometric nonlinearity due to cable sags at each increment step. Ultimate load capacities with the three analyses are evaluated for numerical models of cable-stayed bridges that have center spans of 600 m, 900 m and 1200 m with different girder depths and live load cases. The results show that inelastic buckling analysis is an effective approximation method, as a simple and fast alternative, to obtain ultimate load capacity of long span cable-stayed bridges, whereas elastic buckling analysis greatly overestimates the overall stability of cable-stayed bridges.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1061-1071
• /
• 2015

In the present study, the Navier-Stokes (N-S) equations delineating water flows inside porous media were derived applying Reynolds transport theorem in order to provide a basis for analyzing water wave problems inside the porous media. Then, the derived N-S equations were compared with the same species of equations in existing researches. Based on the N-S equations, a set of Boussinesq equations was then derived in such a form that the dispersiveness and nonlinearity of water waves inside the porous media can be properly reproduced. Finally, numerical analyses were carried out to demonstrate the validity of the equations. The reflection and transmission coefficients of porous breakwaters were calculated and compared with the results of existing hydraulic experiments. The numerical results showed a rather sensitive dependency on the virtual mass coefficient of grains constituting the porous media. The selection of the coefficient with zero turned out to give nice agreements with numerical and experimental results.