• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.521-528
• /
• 2007

This paper proposes a message authentication scheme to resist potential spam threats in SIP-based VoIP services. Our scheme applies the extended HTTP digest authentication mechanism between the inbound proxy and the UAS to verify that a service request is coming through the valid inbound proxy. The proposed scheme is simple and requires minimal modification the current SIP standards, and effective to filter invalid peer-to-peer spam calls. In this paper, an experimental spam attack using modified open source was tested on a commercial VoIP networks to exploit the possibility of spam attacks in real environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.699-700
• /
• 2011

This paper shows the way to prevent the leaking of private information due to malicious codes or connections of invalid URL in QR-Codes, which is used in the present smart-phone. It is difficult to filter out the connections directly with decoding the QR-Codes, so before connecting, we construct servers which compare results of decoding the QR-Codes to a valid URL. The server notifies warning to Smart-phone users if the results were uncertain URLs which did not registered in the server. This paper would help the Smart-phone users to protect their privacy.

• The Korean Journal of Franchise Management
• /
• v.12 no.2
• /
• pp.35-49
• /
• 2021

Purpose: The major objective of this study is to develop a model for the impact of franchisors' Gapjil (verbal·nonverbal Gapjil, abusing bargaining position, refusing transaction, false or exaggerated information, restrictive practices, unfair damage compensation) on franchisee's recontract intention. We also examine the mediating role of economic satisfaction and social satisfaction in the relationship between franchisors' Gapjil and franchisee's contract intention. Research design, data, and methodology: Data were collected from franchisee owners located nationwide in Korea. Out of 256 questionaires distributed, a total of 256 questionnaires were returned. After excluding 10 invalid respondent questionnaires, we coded and analyzed 246 valid questionnaires (effective response rate of 96.09%) using frequency, confirmatory factor analysis, correlations analysis, and structural equation modeling with SPSS 22.O and SmartPLS 3.0. Results: The findings of this study are summarized as follows: First, among the Gapjil of the franchisors, restrictive practices and unfair damage compensation had negative effects on economic and social satisfaction, but verbal and nonverbal Gapjil for economic and social satisfaction was not significant. Second, abusing bargaining positions and false or exaggerated information had negative effects on social satisfaction, but for economic satisfaction, found to be insignificant. Third, economic and social satisfaction had positive effects on the franchisee's recontract intention to the franchisor. Conclusion: The following implications of this study are as follows. First, the construct of Gapjil that occurs between the franchisors and the franchisees was first presented, and the franchisors' Gapjil is divided into interpersonal Gapjil and structural Gapjil. Second, the Gapjil of the franchisors can be an important predictor variable in maintaining and developing a long-term relationship between the franchisors and the franchisees. Third, solving conflict due to the Gapjil problem between franchisors and franchisees can be an important factor for franchisors and franchisees to co-survive and thrive in Korean franchise system. Fourth, this study suggest that managing the Gapjil of the franchisors was a important antecedent factor in maintaining long-term relationship between the franchisors and the franchisees. Therefore, this study will help franchisors formulate effective symbiotic marketing strategies to satisfy relationships with franchisees and consequently enhance long-term orientation.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.35
• /
• pp.101-124
• /
• 2007

This paper purposes to examine the setting aside and the refusal of enforcement of arbitral awards and their implications for practitioners. The aim of challenging an award before a national court at the seat, or place, of arbitration is to have it modified in some way by the relevant court, or more usually, to have that court declare that the award is to be disregarded (i.e. "annulled" or "set aside") in whole or in part. If an award is set aside or annulled by the relevant court, it will usually be treated as invalid and accordingly unenforceable, not only by the courts of the seat of arbitration but also by national courts elsewhere. This is because, under both the 1958 New York Convention and the UNCITRAL Model Law, the competent court may refuse to grant recognition and enforcement of an award that has been "set aside" by a court of the seat of arbitration. The New York Convention set out various grounds for refusal of recognition and enforcement of an arbitration award. The provisions of the Model Law governing recognition, enforcement or setting-aside of awards are almost identical to those set out in the Convention. Especially, the New York Convention and the Model Law state that an arbitral award may be refused and set aside if a national court of the place of arbitration finds that the award is in conflict with the public policy of its own country. Each state has its own concept of what is required by its "public policy". It is possible to envisage, for example, a dispute over the division of gaming profits from a casino. In many states, the underlying transaction that led to the award would be regarded as a normal commercial transaction and the award would be regarded as valid. Indeed, it is a consistent theme to be found in the legislation and judical decision of many countries. If a workable definition of "international public policy" could be found, it would provide an effective way of preventing an award in an international arbitration from being set aside and refusal for purely domestic policy consideration.

• Ocean and Polar Research
• /
• v.24 no.3
• /
• pp.255-261
• /
• 2002

We investigated the distribution of sea ice using Topex/Poseidon (T/P) and ERS-1 .ada. altimeter data in the northwest Weddell Sea, Antarctica, between the area $45-75^{\circ}W\;and\;55-66^{\circ}S$. Using the Geo_Bad_1 flag of the Merged GDR of the T/P, we classified the surface into ocean, land, and sea. Total 257 cycles of altimeter measurements between Oct. 1992 and Sep. 1999 (for nearly 2570 days) were used to analyze the distribution of the Antarctic sea ice. We then calculated the surface area of ice coverage using SUTM20 map projection to monitor the periodic variations. Each year, the maximum and minimum coverage of the sea ice were found in late August and February in the study area, respectively. We also studied the sea ice distribution using ERS-1 altimeter data between $45-75^{\circ}W\;and\;55-81.5^{\circ}S$ to compare with the T/P Using the Valid/Invalid flag of the Ocean Product, we analyzed the sea ice distribution between March and August of 1995, which showed very good coherence with the T/P measurements. Our preliminary results showed that the altimeter measurements can be effectively used to monitor the distribution of the sea ice in the polar region. However, the size of radar footprint, typically 2-6km depending on the roughness of the sea surface, may be too big to monitor the sharp boundary between ice and water/land. If more other altimeter mission data with dense coverage such as Geosat GM are analyzed together, this limitation can be significantly improved. If we also combine other microwave remote sensing data such as radiometer, and SSM/I, the result will be significantly enhanced.

• Structural Engineering and Mechanics
• /
• v.73 no.3
• /
• pp.271-286
• /
• 2020

Passive control technologies are commonly used in several areas to suppress structural vibrations by the addition of supplementary damping, and some modal damping may be heavy beyond critical damping even for regular structures with energy dissipation devices. The design of passive control structures is typically based on (complex) mode superposition approaches. However, the conventional mode superposition approach is predominantly applied to cases of under-critical damping. Moreover, when any modal damping ratio is equal or close to 1.0, the system becomes defective, i.e., a complete set of eigenvectors cannot be obtained such that some well-known algorithms for the quadratic eigenvalue problem are invalid. In this paper, a generalized complex mode superposition method that is suitable for under-critical, critical and over-critical damping is proposed and expressed in a unified form for structural displacement, velocity and acceleration responses. In the new method, the conventional algorithm for the eigenvalue problem is still valid, even though the system becomes defective due to critical modal damping. Based on the modal truncation error analysis, modal corrected methods for displacement and acceleration responses are developed to approximately consider the contribution of the truncated higher modes. Finally, the implementation of the proposed methods is presented through two numerical examples, and the effectiveness is investigated. The results also show that over-critically damped modes have a significant impact on structural responses. This study is a development of the original complex mode superposition method and can be applied well to dynamic analyses of non-classically damped systems.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.128-141
• /
• 2015

Independent Component Analysis (ICA), one of the blind source separation methods, can be applied for extracting unknown source signals only from received signals. This is accomplished by finding statistical independence of signal mixtures and has been successfully applied to myriad fields such as medical science, image processing, and numerous others. Nevertheless, there are inherent problems that have been reported when using this technique: instability and invalid ordering of separated signals, particularly when using a conventional ICA technique in vibratory source signal identification of complex structures. In this study, a simple iterative algorithm of the conventional ICA has been proposed to mitigate these problems. The proposed method to extract more stable source signals having valid order includes an iterative and reordering process of extracted mixing matrix to reconstruct finally converged source signals, referring to the magnitudes of correlation coefficients between the intermediately separated signals and the signals measured on or nearby sources. In order to review the problems of the conventional ICA technique and to validate the proposed method, numerical analyses have been carried out for a virtual response model and a 30 m class submarine model. Moreover, in order to investigate applicability of the proposed method to real problem of complex structure, an experiment has been carried out for a scaled submarine mockup. The results show that the proposed method could resolve the inherent problems of a conventional ICA technique.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.5
• /
• pp.422-428
• /
• 2009

NAND flash memory is widely used in embedded systems because of many attractive features, such as small size, light weight, low power consumption and fast access speed. However, it requires garbage collection, which includes erase operations. Erase operation is slower than other operations. Further, a block has a limited erase lifetime (typically 100,000) after which a block becomes unusable. The proposed garbage collection policy focuses on minimizing the total number of erase operations, the deviation value of each block and the garbage collection time. NAND flash memory consists of pages of three types, such as valid pages, invalid pages and free pages. In order to achieve above goals, we use a page ratio to decide when to do garbage collection and to select the target victimblock. Additionally, we implement allocating method and group management method. Simulation results show that the proposed policy performs better than Greedy or CAT with the maximum rate 85% of reduction in the deviation value of the erase operations and 6% reduction in garbage collection time.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.617-625
• /
• 2009

NAND flash memory is widely used in embedded systems because of many attractive features, such as small size, light weight, low power consumption and fast access speed. However, it requires garbage collection, which includes erase operations. Erase operation is very slow. Besides, the number of the erase operations allowed to be carried out for each block is limited. The proposed garbage collection method focuses on minimizing the total number of erase operations, the deviation value of each block and the garbage collection time. NAND flash memory consists of pages of three types, such as valid pages, invalid pages and free pages. In order to achieve above goals, we use a page rate to decide when to do garbage collection and to select the target victim block. Additionally, We implement allocating method and group management method. Simulation results show that the proposed policy performs better than Greedy or CAT with the maximum rate at 82% of reduction in the deviation value of erase operation and 75% reduction in garbage collection time.

• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.387-398
• /
• 2006

In this paper, we propose a new page allocation scheme for flash memory file system. The proposed scheme allocates pages by exploiting the concept of Purity, which is defined as the fraction of blocks where valid Pages and invalid Pages are coexisted. The Pity determines the cost of block cleaning, that is, the portion of pages to be copied and blocks to be erased for block cleaning. To enhance the purity, the scheme classifies hot-modified data and cold-modified data and allocates them into different blocks. The hot/cold classification is based on both static properties such as attribute of data and dynamic properties such as the frequency of modifications. We have implemented the proposed scheme in YAFFS and evaluated its performance on the embedded board equipped with 400MHz XScale CPU, 64MB SDRAM, and 64MB NAND flash memory. Performance measurements have shown that the proposed scheme can reduce block cleaning time by up to 15.4 seconds with an average of 7.8 seconds compared to the typical YAFFS. Also, the enhancement becomes bigger as the utilization of flash memory increases.