• Applied Science and Convergence Technology
• /
• v.26 no.4
• /
• pp.55-61
• /
• 2017

Graphene, with a carrier mobility achieving up to $140,000cm^2/Vs$ at room temperature, makes it an ideal material for application in semiconductor devices. However, when the metal comes in contact with the graphene sheet, an energy barrier forms at the metal-graphene interface, resulting in a drastic reduction of the carrier mobility of graphene. In this review, the various methods of forming metal-graphene covalent contacts to lower the contact resistance are discussed. Furthermore, the graphene sheet in the area of metal contact can be cut in certain patterns, also discussed in this review, which provides a more efficient approach to forming covalent contacts, ultimately reducing the contact resistance for the realization of high-performance graphene devices.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.1
• /
• pp.58-62
• /
• 1995

Substituted 3-phenyl-1-silabutanes such as 3-phenyl-1-silabutane (1), 3-(2,5-dimethylphenyl)-1-silabutane (2), 3-(p-chlorotolyl)-1-silabutane (3), and 3-naphthyl-1-silabutane (4) were prepared in 62-96% yield by reduction of the corresponding substituted 3-phenyl-1,1-dichloro-1-silabutanes with LiAlH4. The dehydrogenative polymerization of the monomer silanes was carried out with Cp2MCl2/Red-Al (M=Ti, Hf) catalyst system. The molecular weight of the polymers produced ranged from 700 to 1300 (vs polystyrene) with degree of polymerization (DP) of 5 through 16 and with polydispersity index (PDI)=1.1-2.1. The dehydrogenative polymerization of the monomer silanes with Cp2TiCl2/Red-Al catalyst system occurred at a faster rate and produced somewhat higher molecular weights of polysilane than that with Cp2HfCl2/Red-Al catalyst system.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.2
• /
• pp.138-143
• /
• 1995

Substituted 3-phenyl-1-silabutanes, 3-chlorophenyl-1-silabutane (1), 3-tolyl-1-silabutane (2), and 3-phenoxyphenyl-1-silabutane (3), were prepared in 68-98% yield by reduction of the corresponding substituted 3-phenyl-1,1-dichloro-1-silabutanes with LiAlH4. The dehydrogenative homopolymerization and copolymerization of the silanes were performed with Cp2MCl2/Red-Al (M=Ti, Hf) catalyst system. The molecular weights of the resulting polymers were in the of range 600 to 1100 (vs polystyrene) with degree of polymerization (DP) of 5 to 8 and polydispersity index (PDI) of 1.6 to 3.8. The monomer silanes underwent the dehydrogenative polymerization with Cp2TiCl2/Red-Al catalyst to produce somewhat higher molecular weight polysilanes compared with Cp2HfCl2/Red-Al catalyst.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.259-268
• /
• 2015

This research grasped the difference of between the daily medical expenses and the medical expenses reduction rate also the cause of change. In the centre, it was conducted in order to offer the necessary basic data to a recuperation pay management solution's establishment. This research surveyed across the country's urban region 50-general hospital's the infective enteritis disease for a year. Then it was conducted the average daily medical expenses and the average medical expenses reduction rate as a distinguishable survey that is a hospitalization and an outpatient the result is followed. The inpatient daily medical expenses correlated with the total number of medical institution personnel, and the outpatient daily medical expenses correlated with the number of beds.. Inpatient medical expense reduction rate was correlated with number of beds and the total number of medical institution personnel. The interaction between medical institution information and daily medical expenses was found to have a positive (+) effect on the total number of medical institution personnel, as well as the numbers of inpatients vs. outpatient. This research about the medical expense reduction rate and daily medical expense help medical institution's efficient, rational decision making and it will be an important basis of a priority recuperation pay's policy.

• Journal of Korean Academy of Nursing
• /
• v.43 no.3
• /
• pp.305-311
• /
• 2013

Purpose: The purpose of this study was to compare the effect of alcohol gel according to the amount and drying time in health personnel hand hygiene and to promote in their practice adequate and effective hand hygiene. Methods: The crossover experimental study was performed with 14 volunteers. Hands were artificially contaminated with 5 mL of $10^8$ CFU/mL of Serratia marcescens (ATCC 14756) and four different alcohol gel hand hygiene methods varying by the amount of alcohol gel (2 mL vs. 1 mL) and drying time (complete vs. incomplete) were compared. Samples were collected by glove juice sampling procedures. Results: Mean log reduction values of the four different hand hygiene methods were $2.22{\pm}0.36$, $1.26{\pm}0.53$, $1.49{\pm}0.60$, $0.89{\pm}0.47$ respectively for the 4 groups: adequate amount (2mL) and complete dry (30 seconds rubbing followed by 2 min air-dry), inadequate amount (1 mL) and complete dry, adequate amount and incomplete dry (15 seconds rubbing and no air-dry), and inadequate amount and incomplete dry. The difference was statistically significant in the adequate amount and complete dry group compared to other three groups (p<.001). Conclusion: Only alcohol gel hand hygiene with adequate amount and complete drying was satisfactory by U.S. FDA-TFM efficacy requirements for antiseptic hand hygiene products.

• Journal of the Korean Chemical Society
• /
• v.44 no.2
• /
• pp.109-114
• /
• 2000

In this study, the optimum analytical condition of Differential pulse Voltammetry for the polymeric Sodium Alginate was studied and its reduction funtional groups were confirmed using Cyclic Vol-tammetry and IR spectroscopy. Optimum conditions were as followed; mercury drop size : medium size, accumulation time : 60sec, accumulation potential : -0.20V vs Ag/AgCl, scan rate : 100mV/sec, supporting electrolyte : 0.10M $NaClO_4$(pH 6.8). After polymeric Sodium Alginate was hydrolized at $100^{\circ}C$ in acidic condition, the current peaks of oligomer were compared with current peak of polymeric Sodium Alginate. In this optimum condition, calibration curve of polymer Sodium Alginate showed good linearity from 0.50ppm to 4.0ppm where as oligomeric Sodium Alginate showed good linearity from 0.05ppm to 0.24ppm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.150-150
• /
• 2016

Mankind is enjoying a great convenience of their life by the rapid growth of secondary industry since the Industrial Revolution and it is possible due to the invention of huge power such as engine. The automobile which plays the important role of industrial development and human movement is powered by the Engine Module, and especially Diesel engine is widely used because of mechanical durability and energy efficiency. The main work mechanism of the Diesel engine is composed of inhalation of the organic material (coal, oil, etc.), combustion, explosion and exhaust Cycle process then the carbon compound emissions during the last exhaust process are essential which is known as the major causes of air pollution issues in recent years. In particular, COx, called carbon oxide compound which is composed of a very small size of the particles from several ten to hundred nano meter and they exist as a suspension in the atmosphere. These Diesel particles can be accumulated at the respiratory organs and cause many serious diseases. In order to compensate for the weak point of such a Diesel Engine, the DPF(Diesel Particulate Filter) post-cleaning equipment has been used and it mainly consists of ceramic materials(SiC, Cordierite etc) because of the necessity for the engine system durability on the exposure of high temperature, high pressure and chemical harsh environmental. Ceramic Material filter, but it remains a lot of problems yet, such as limitations of collecting very small particles below micro size, high cost due to difficulties of manufacturing process and low fuel consumption efficiency due to back pressure increase by the small pore structure. This study is to test the possibility of new structure by direct infiltration of SiC Whisker on Carbon felt as the next generation filter and this new filter is expected to improve the above various problems of the Ceramic DPF currently in use and reduction of the cost simultaneously. In this experiment, non-catalytic VS CVD (Vapor-Solid Chemical Vaporized Deposition) system was adopted to keep high mechanical properties of SiC and MTS (Methyl-Trichloro-Silane) gas used as source and H2 gas used as dilute gas. From this, the suitable whisker growth for high performance filter was observed depending on each deposition conditions change (input gas ratio, temperature, mass flow rate etc.).

• Analytical Science and Technology
• /
• v.14 no.2
• /
• pp.123-130
• /
• 2001

Determination of cadmium(II) ion with a perfluorinated sulfonated polymer-ethylenediamine(nafion-en) modified glassy carbon electrode was studied. It was based on the chemical reactivity of an immobilized layer(nafion-en) to yield complex $[Cd(en)_2]^{2+}$. The reduction peak potential by differential pulse voltammetry(DPV) was observed at $-0.780({\pm}0.005)V$ vs. As/AgCl. The linear calibration curve was obtained in cadmium(II) ion concentration range $5.0{\times}10^{-7}-2.0{\times}10^{-5}M$, and the detection limit(3s) was $2.20{\times}10^{-7}M$. The detection limit of nafion-en modified glassy carbon electrode has been shown about 14 higher sensitivity than a bare glassy carbon electrode.

• Journal of Environmental Policy
• /
• v.12 no.1
• /
• pp.125-153
• /
• 2013

The purpose of this article is to measure sustainability of countries based on material flow approach by connecting fossil fuel vs. economy, and fossil fuel vs. environment, respectively. The focus of the article is to confirm where each country concentrates more between economic growth and environment. Even though most of countries exclaimed the growth harmonized between economy and environment, the empirical results proved that they had weight on economic growth over environment. Of three country groups, the sustainability in OECD countries was the lowest, whereas that of low income countries was the highest. It has been known that the main offenders of global warming are developing countries and backward countries, but emission of greenhouse gas per capita in OECD countries was higher and as a result, their sustainability was much lower than those of other countries. Accordingly, because the OECD countries have more responsibility for the emission of greenhouse gas, it is necessary that they have to bear a larger portion of emission reduction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.648-654
• /
• 2003

Diamond MIS(Metal-Insulator-Semiconductor) diodes and MISFETs(Metal-Insulator-Semiconductor Field Effect Transistors) were fabricated by employing various fluorides as gate insulator, and their electrical properties were closely investigated by means of C-V measurements. The A1/BaF$_2$/diamond MIS structure exhibited outstanding electrical properties. The MIS diode showed a very low surface state density of ∼10$\^$10//$\textrm{cm}^2$ eV near the valence band edge, and the observed effective mobility(${\mu}$$\_$eff/) of the MISFET was 400 $\textrm{cm}^2$/Vs, which is the highest value obtained until now in the diamond FET. From the chemiphysical point of view, the above result might be explained by the reduction of adsorbed-oxygen on the diamond surface via strong chemical reaction by the constituent Ba atom in the insulator during the film deposition(Oxygen-Gettering Effect).