• Ocean and Polar Research
• /
• v.32 no.1
• /
• pp.73-84
• /
• 2010

A terrestrial LiDAR was used to acquire precise and high-resolution topographical information of Malipo beach, Korea. Terrestrial LiDAR and RTK-DGPS (VRS) were mounted on top of a survey vehicle and used to scan 20 times stop-and-go method with 250 m spacing intervals at ebb tides. In total, 7 measurements were made periodically from 2008 to 2009 and after each beach replenishment event. We carried out GIS-based 3D spatial analysis such as slope and volume calculations in order to assess topographical changes over time. In relation to beach replenishment, comparative analysis of each volume change revealed them to be similar. This result indicates that the terrestrial LiDAR measurements are accurate and can be used to analyze temporal topographical changes. In conclusion, the methodology employed in this study can be used efficiently to exercise coastal management through monitoring and analyzing beach process such as erosion and deposition.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.61-64
• /
• 2004

현재 GPS를 이용한 위성측위시스템은 기존의 DGPS에 의한 정밀도 향상 차원을 넘어 상시관측소를 활용한 기준국의 활용 증대 및 다양한 동시 사용자의 욕구를 충족시키기 위해 여러 가지 연구들이 진행되고 있다 현재 국내 연구동향으로 VRS-RTK (Virtual Reference Station Real Time Kinematic)에 대한 기초 연구가 진행 중에 있으며 해양수산부의 전파를 이용한 비콘 방식과 표준과학연구원 천문대에서는 MBC와 연계한 FM-DARC(Data Radio Channel)방식 등이 활용 방안으로 준비중에 있으며, 여러 기관과 대학 연구 기관에서 기초 연구가 진행 중에 있다. 따라서 이미 독일, 싱가폴, 일본 등에서 활용하고 있는 VRS의 연구를 보다 심화하여 현재 각기 다른 기관에서 보유하고 있는 70여개의 GPS 상시관측소의 효율적인 활용과 대 국민 서비스를 제공할 수 있는 시스템이 절실히 필요한 시기이다. 따라서 본 논문에서는 이런 가상관측의 결과를 산출할 수 있는 통계학적 모델링을 통한 가상관측 보정값을 산출할 수 있는 보정값을 제시할 수 있는 알고리즘 개발에 그 목적이 있다. 향후 알고리즘 개발이 완료되면 통계학적 모델링을 통해 단일 기준점에 의한 GPS 측량에서 불가능한 위치 결정 네트웍의 가상 관측을 가능하게 할 것이며, 신뢰성 있는 미지정수 해를 만들 수 있을 것이다.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.1
• /
• pp.44-58
• /
• 2017

The inspection for building occupancy authorization has lacked objectivity due to manual measurement methods. This is why connivance of the illegal buildings has been rampant, which has led to so many incidents. Consequently, this law has lost its intent to protect people's lives and property. In this study, for the purpose of improvement of this law, the research was conducted by the utilization of unmanned aerial vehicle for automated inspection for building occupancy authorization. Theoretical considerations about building occupancy authorization and the trend of UAV technology were accomplished. Secondly, a series of reverse engineering was conducted including digital photography, network RTK-VRS surveying and post-processing data. Thirdly, the resultant spatial information was used for building occupancy inspection authorization in a BIM platform and the effectiveness and applicability of UAV-based inspection was analyzed. As a result, methodology for UAV-based automated building occupancy inspection authorization was derived. And it was found that eleven items would be possible to be automated among thirty total items for building occupancy authorization. Also it was found that UAV-based automated inspection could be valid in inspecting building occupancy authorization due to authentic accuracy, effectiveness and applicability with government policy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.521-531
• /
• 2020

QZSS (Quasi-Zenith Satellite System) provides the CLAS (Centimeter Level Augmentation Service) through the satellite's L6 band. CLAS provides correction messages called C-SSR (Compact - State Space Representation) for GPS (Global Positioning System), Galileo and QZSS. In this study, CLAS messages were received by using the AsteRx4 of Septentrio which is a GPS receiver capable of receiving L6 bands, and the messages were decoded to acquire C-SSR. In addition, Multi-GNSS (Global Navigation Satellite System) Code-PPP (Precise Point Positioning) was developed to compensate for GNSS errors by using C-SSR to pseudo-range measurements of GPS, Galileo and QZSS. And non-linear least squares estimation was used to estimate the three-dimensional position of the receiver and the receiver time errors of the GNSS constellations. To evaluate the accuracy of the algorithms developed, static positioning was performed on TSK2 (Tsukuba), one of the IGS (International GNSS Service) sites, and kinematic positioning was performed while driving around the Ina River in Kawanishi. As a result, for the static positioning, the mean RMSE (Root Mean Square Error) for all data sets was 0.35 m in the horizontal direction ad 0.57 m in the vertical direction. And for the kinematic positioning, the accuracy was approximately 0.82 m in horizontal direction and 3.56 m in vertical direction compared o the RTK-FIX values of VRS.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.74-74
• /
• 2019

수문조사를 통한 유량자료는 물의 이수, 치수, 환경 등 홍수피해 방지, 수자원의 관리 및 계획을 위한 기초자료로 이용되고 있다. 하지만 예산, 인력, 안전 및 하천공사 등의 문제로 매년 모든 지점에서 유량 측정을 실시하지 못하는 어려움이 있다. 특히 홍수기의 태풍 등 큰 호우사상 발생 시 수위-유량관계 변화 검토가 필요하지만 홍수기 계획지점 이외 지점에서 측정은 위와 같은 문제로 어려움이 있다. 따라서 본 연구에서는 이런 문제점을 개선하기 위해 최소 인력이 단시간 간편하게 드론을 활용하여 유량을 측정할 수 있는 방법을 도입하였다. 드론을 활용한 유량측정방법은 드론 사진측량 개념에서 접근하였으며 드론 사진측량의 정확도는 다양한 분야에서 많은 연구를 통해 입증된 바가 있다. 본 연구의 대상지점은 중랑천 상류에 위치한 의정부시(신곡교) 지점에서 보급형 회전익 드론 (DJI, 팬텀4 pro)을 활용하여 검증 목적을 위해 측정하였다. 유량측정은 드론으로 촬영된 항공사진 상에서 지상에 위치확인 가능한 지상기준점(GCP, Ground Control Point) 4개점을 선점하고 RTK-VRS 장비를 이용하여 측량을 수행하였다. 항공사진 촬영은 드론을 일정높이의 공중에 정지되어 있는 호버링(Hovering) 상태에서 카메라 타임랩스 기능으로 3초 간격 하도 내 수표면을 촬영하였다. 항공사진 수표면에 유하하는 부유물의 3초 간격 이동위치와 GCP 자료를 활용하여 X, Y 좌표 분석을 통해 3초간 이동거리를 표면유속으로 산정하고 통수단면적을 적용하여 유량을 산정하였다. 이와 같이 드론 사진측량으로 산정된 유량과 일반적인 유량측정 방법을 통해 개발된 수위-유량관계곡선식과의 비교를 통해 드론을 활용한 유량측정 방법의 적용성을 확인하였다. 다만, 드론이라는 기계적인 장비의 한계로 야간, 바람 및 강우 등 환경적인 요인에 의해 측정의 제한이 있을 것으로 판단된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.5
• /
• pp.379-388
• /
• 2019

Recently, a technique for acquiring spatial information data using UAV (Unmanned Aerial Vehicle) has been greatly developed. It is a very crucial issue of the GIS (Geographic Information System) mapping system that passes way point in the unmanned airframe and finally measures the accurate image and stable localization to the desired destination. Though positioning using DGPS (Differential Global Navigation System) or RTK-GPS (Real Time Kinematic-GPS) guarantee highly accurate, they are more expensive than the construction of a single positioning system using a single GPS. In the case of a low-priced single GPS system, the stability of the positioning data deteriorates. Therefore, it is necessary to supplement the uncertainty of the absolute position data of the UAV and to improve the accuracy of the current position data economically in the operating state of the UAV. The aim of this study was to present an algorithm enhancing the stability of position data in a single GPS mode of UAV with multiple GPS. First, the arrangement of multiple GPS receivers through the center of gravity of the UAV were examined. Next, MD (Mahalanobis Distance) is applied to detect instantaneous errors of GPS data in advance and eliminate outliers to increase the accuracy of previously collected multiple GPS data. Processing procedure for multiple GPS reception data by applying the center of the triangular method were presented to improve the position accuracy. Second, UAV navigation systems integrated multiple GPS through configuration of the UAV specifications were implemented. Using the unmanned airframe equipped with multiple GPS receivers, GPS data is measured with the TCM (Triangular Center Method). In addition, UAV equipped with multiple GPS were operated in study area and locational accuracy of multiple GPS of UAV with VRS (Virtual Reference Station) GNSS surveying were compared. The result showed that the error factors are compensated, and the error range are reduced, resulting in the reliability of the corrected value. In conclusion, the result in this paper is expected to realize high-precision position estimation at low cost in UAV using multiple low-cost GPS receivers.