• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.3
• /
• pp.15-20
• /
• 2012

This paper presents a 5-Gb/s optical receiver circuit realized in a $0.13-{\mu}m$ CMOS technologies for the applications of high-speed digital interface. Exploiting modified RGC input stage at the front-end transimpedance amplifier, interleaving active feedback and source degeneration techniques at the limiting amplifier, the proposed optical receiver chip demonstrates the measured results of $72-dB{\Omega}$ transimpedance gain, 4.7-GHz bandwidth, and $400-mV_{pp}$differential output voltage swings up to the data rate of 5-Gb/s. Also, the chip dissipates 66mW in total from a single 1.2-V supply, and occupies the area of $1.6{\times}0.8mm^2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.55-56
• /
• 2009

Small RFID tag antenna were fabricated on Si substrate and their physical and electrical properties were evaluated. With decreasing the size of tag antenna on Si substrate, small SMD-type RFID tags could be fabricated, which is very useful for PCB tracking. Firstly, tag antenna pattern and the electromagnetic properties were simulated with HFSS. The frequency was 13.56MHz, the line-width and line-gap were modeled in the range of $50{\sim}200{\mu}m$. S parameters, SRF, and Q value were calculated from geometry. When the line-width and line-gap were 100um and the loop-turn was 10, the SRF was 80MHZ and the Q value was ca. 9. When the microstrip antenna pattern of aluminum was fabricated by using DC sputtering, Vpp of ca. 1.6V was obtained when the reader-tag distance was 40mm.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.777-786
• /
• 2000

Fire resistance and thermal stability of polypropylene composite systems were investigated by using several halogenated fire-retardants such as decabromodiphenyl oxide (DBDPO) and chlorinated paraffin wax (CPW). The fire resistance of composite systems was thoroughly examined by measuring limited oxygen index (LOI, ASTM D2863, ISO 4589) and characteristic properties of cone calorimetry(ASTM E1354, ISO 5660) heat release rates (HRR), time to ignition (TTI), total heat release (THR), effective heat of combustion (EHC), mass loss rates, etc. Comparing the cone calorimetry experimental results of the halogen flame retardants, DBDPO exhibited twice higher efficiency than CPW in polypropylene systems, and the LOI also showed similar trends to cone calorimetry. The thermo-oxidative stability of the composite systems was increased about 30-5$0^{\circ}C$ in thermogravimetry analysis.Collectively, the combustion, extinction and thermally-stable characteristics of flame retardants were identified in this study.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.3
• /
• pp.1-4
• /
• 2004

Fabrication and electrical and mechanical properties of piezoelectric micro bending actuators (PMBA) using sol-gel-multi-coated thick PZT films and MEMS processes were investigated. PMBA could be used for design and fabrication of micro fluidic devices, for example, micro-pumps, micro dispensers, and so on. PMBA were fabricated using 2 um thick PZT films on Pt (350 nm)/$SiO_2$ (500 nm)/Si ($300\mu\textrm{m}$) substrates and MEMS processes. 7 types of PMBA were fabricated with areas of silicon diaphragms, PZT films and top electrodes. When the sizes of silicon diaphragms, PZT films and Pt top electrodes were reduced from 3000$\times$$1389\mu\textrm{m}$, 4000$\times$$1000\mu\textrm{m}$ and 4000$\times$$900\mu\textrm{m}$ down to 14%, 14% and 11 % of them, respectively, the center displacements of PMBA were decreased from 0.68 um to 0.10 um at 5 Hz and 12 Vpp. So, PMBA with large areas showed larger displacements than PMBA with small areas and experimental results were also good agreement with the plate and shell theory.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.44-48
• /
• 2007

In recent years, the size of plane substrates and semiconductor wafers has increased. As conventional contact transportation systems composed of, for example, carrier rollers, belt conveyers, and robot hands carry these longer and wider substrates, the increased weight results in increased potential for fracture. A noncontact transportation system is required to solve this problem. We propose a new noncontact transportation system combining acoustic viscous and aerostatic forces to provide damage-free transport. In this system, substrates are supported by aerostatic force and transported by acoustic viscous streaming induced by traveling wave deformation of a disk-type stator. A ring-type piezoelectric transducer bonded on the stator excites vibration. A stator with a high Q piezoelectric transducer can generate traveling vibrations with amplitude of $3.2{\mu}m$. Prior to constructing a carrying road for substrates, we clarified the basic properties of this technique and stator vibration characteristics experimentally. We constructed the experimental equipment using a rotational disk with a 95-mm diameter. Electric power was 70 W at an input voltage of 200 Vpp. A rotational torque of $8.5\times10^{-5}Nm$ was obtained when clearance between the stator and disk was $120{\mu}m$. Finally, we constructed a noncontact transport apparatus for polycrystalline silicon wafers $(150(W)\times150(L)\times0.3(t))$, producing a carrying speed of 59.2 mm/s at a clearance of 0.3 mm between the stator and wafer. The carrying force when four stators acted on the wafer was $2\times10^{-3}N$. Thus, the new noncontact transportation system was demonstrated to be effective.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.21-25
• /
• 2009

By using Si CMOS process, small RFID tag antenna were fabricated on Si substrate and their electrical properties were evaluated. Firstly, tag antenna pattern and the electromagnetic properties were simulated with HFSS. The frequency was 13.56 MHz, the line-width and line-gap were modeled in the range of $50{\sim}200{\mu}m$. S parameters, SRF, and Q value were calculated from geometry. When the line-width and line-gap were $100{\mu}m$ and $100 {\mu}m$, respectively and the loop-turn was 10, the SRF was 80 MHZ and the Q value was ca. 9. When the microstrip antenna pattern of aluminum $2{\mu}m$ was fabricated by using DC sputtering, Vpp of ca. 4.3 V was obtained when the reader and tag were closely contacted.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2410-2412
• /
• 2005

In this study, two types of PS substrate were fabricated for sensing of chemical and biological substances. For sensing of the humidity and chemical analyzes such as $CH_3OH$ or $C_2H_5OH$, PS layers are prepared by photoelectrochemical etching of silicon wafer in aqueous hydrofluoric acid solution. To evaluate their sensitivity, we measured the resistance variation of the PS diaphragm. As the amplitude of applied voltage increases from 2 to 6Vpp at constant frequency of 5kHz, the resistance variation for humidity sensor rises from 376.3 to $784.8{\Omega}$/%RH. And the sensitivities for $CH_3OH$ and $C_2H_5OH$ were 0.068 uA/% and 0.212 uA/%, respectively. For biological sensing application, amperometric urea sensors were fabricated based on porous silicon(PS), and planar silicon(PLS) electrode substrates by the electrochemical methods. Pt thin film was sputtered on these substrates which were previously formed by electrochemical anodization. Poly (3-methylthiophene) (P3MT) were used for electron transfer matrix between urease(Urs) and the electrode phase, and Urs also was by electrochemically immobilized. Effective working area of these electrodes was determined for the first time by using $Fe(CN)_6^{3-}/Fe(CN)_6^{4-}$ redox couple in which nearly reversible cyclic voltammograms were obtained. The $i_p$ vs $v^{1/2}$ plots show that effective working electrode area of the PS-based Pt thin film electrode was 1.6 times larger than the PLS-based one and we can readily expect the enlarged surface area of PS electrode would result in increased sensitivity by ca. 1.6 times. Actually, amperometric sensitivity of the Urs/P3MT/Pt/PS electrode was ca 0.91uA/$mM{\cdot}cm^2$, and that of the Urs/P3MT/Pt/PLS electrode was ca. 0.91uA/$mM{\cdot}cm^2$ in a linear range of 1mmol/L to 100mmol/L urea concentrations

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.330-331
• /
• 2005

본 논문에서는 카메라폰용 광학중(Optical zooming) 과 자동초점조절장치 (Auto Focusing, AF)에 쓰일 초음파모터를 제작하였다. 초음파모터의제작 및 시뮬레이션은 유한요소해석 프로그램인 ATILA 5.2.1 (Magsoft co.)를 사용하여 디자인설계에 따른 구동특성을 고찰하였고 제작된 초음파모터는 한쪽 면이 없는 사작형의 탄성체를 제작하였으며 탄성체의 양쪽 다리에 각각 압전체를 부착하였다. 또한 압전세라믹의 조성은 $0.9Pb(Zr_{0.51}Ti_{0.49})O_3-0.1Pb(Mn_{1/3}Nb_{1/3}Sb_{1/3})O_3$의 조성으로 설계하였고 시편의 제조는 7-layer로 적층하였다. 제작된 압전세라믹의 치수는 6*2*0.35$mm^3$(길이*폭*두께)로 제작하였다 또한 탄성체의 외형치수는 10*10*2$mm^3$로 제작하였으며 두께를 각각 0.3[mm], 0.5[mm], 0.8[mm]으로 변화시키며 제작하였다. 두께가 0.8[mm]인경우 공진주파수는 60.5[kHz]를 나타내었으며 초음파모터의 압전세라믹에 인가전압이 증가함에 따라 회전속도와 모터에 흐르는 전류는 증가하였다. 인가전압이 40[Vpp] 일 때 회전속도는 206[rpm] 이며 소비전력은 0.3[W]로 제작된 시편은 카메라폰용 광학중 및 자동초점조절장치시스템 분야에 응용이 가능하다.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.3
• /
• pp.323-331
• /
• 2000

Purpose: Brain metastases are present in approximately 10-16% of small cell lung cancer patients at diagnosis. Brain metastasis is an important clinical problem associated with increasing the survival rate, with a cumulative incidence of up to 80% in patients surviving 2 years. Prophylactic cranial irradiation(PCI) reduces the incidence of brain matastasis and may prolong survival in patients with limited small-cell lung cancer who achieved complete remission. This study was performed to analyze the incidence of brain metastasis, survival and clinical aspects after PCI in patients with limited small-cell lung cancer who achieved complete remission. Methods : Between 1989 and 1999, forty-two patients with limited small-cell lung cancer who achived achieved complete remission after therapy were enrolled into this study retrospectively. All patients received etoposide and cisplatin(VPP) alternating with cytoxan, adriamycin, and vincristine(CAV) every 3 weeks for at least 6 cycles initially. All patients received thoracic radiotherapy: concurrent(38.1%) and sequential(61.9%). All patients received late PCI. Results : Most patients(88.1%) were men, and the median age was 58 years. The median follow-up duration was 18.1 months. During the follow-up period, 57.1% of the patients developed relapse. The most frequent site of relapse was chest(35.7%), followed by brain(14.3%), liver(11.9%), adrenal gland(44%), and bone(2.2%). With the Kaplan-Meier method, the average disease-free interval was 1,090 days(median 305 days). The average time to development of brain relapse after PCI and other sites relapse(except brain) were 2,548 days and 1,395 days(median 460 days), respectively. The average overall survival was 1,233 days(median 634 days, 21.1 months), and 2-year survival rates was 41.7%. The average overall survival in the relapse group was 642 days(median 489 days) and in the no relapse group was 2,622 days(p<0.001). The average overall survival in the brain relapse group was 928 days(median 822 days) and in the no brain relapse group was 1,308 days(median 634 days)(p=0.772). In most patients(85.7%), relapse(except brain) or systemic disease was the usual cause of death. Brain matastasis was the cause of death in 14.3% of the cases. Conclusions : We may conclude that PCI reduces and delays brain metastasis in patients with limited small cell lung cancer who achieved complete remission. We found decreased survival in relapse group but, no significant survival difference was noted according to brain matastasis. And relapse(except brain) or systemic disease was the usual cause of death. In order to increase survival, new treatment strategies for control methods for relapse and systemic disease are required.

• Environmental and Resource Economics Review
• /
• v.30 no.2
• /
• pp.237-268
• /
• 2021

As variable renewable sources rapidly increase due to the Energy Transition plan, integration cost of renewable sources to the power system is rising sharply. The increase in variable renewable energy reduces the capacity factor of existing traditional power capacity, and this undermines the efficiency of the overall power supply, and demand resources are drawing attention as a solution. In this study, we analyzed how much electric vehicle demand resouces, which has great potential among other demand resources, can reduce power supply costs if it is used as a flexible resource for renewable generation. As a methodology, a stochastic form of power system optimization model that can effectively reflect the volatile characteristics of renewable generation is used to analyze the cost induced by renewable energy and the benefits offered by electric vehicle demand resources. The result shows that virtual power plant-based direct control method has higher benefits than the time-of-use tariff, and the higher the proportion of renewable energy is in the power system, the higher the benefits of electric vehicle demand resources are. The net benefit after considering commission fee for aggregators and battery wear-and-tear costs was estimated as 67% to 85% of monthly average fuel cost under virtual power plant with V2G capability, and this shows that a sufficient incentive for market participation can be offered when a rate system is applied in which these net benefits of demand resources are effectively distributed to consumers.