• Journal of KIISE
• /
• v.43 no.9
• /
• pp.947-952
• /
• 2016

Most data centers attempt to consolidate servers using virtualization technology to efficiently utilize limited physical resources. Moreover, virtualized systems have commonly adopted contents-based page sharing mechanism for page deduplication among virtual machines (VMs). However, previous page sharing schemes are limited by the inability to effectively manage accumulated hints which mean sharable pages in stack. In this paper, we propose a priority-based hint management scheme to efficiently manage accumulated hints, which are sent from guest to host for improving page sharing opportunity in virtualized systems. Experimental results show that our scheme removes pages with low sharing potential, as compared with the previous schemes, by efficiently managing the accumulated pages.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.117-129
• /
• 2009

This paper studied the safety management network system of infrastructure which constructed smart sensors, closed-circuit television(CCTV) and monitoring system. This safety management of infrastructure applied to bridge, cut slop and tunnel, embankment etc. The system applied to technologies of standardization guidelines, data acquirement technologies, data analysis and judgment technologies, system integration setup technology, and IT technologies. It was constructed safety management network system of various infrastructure to improve efficient management and operation for many infrastructure. Integrated safety management network system of infrastructure consisted of the real-time structural health monitoring system of each infrastructure, integrated control center, measured data transmission using i of tet web-based, collecting data using sf ver, early alarm system which the dangerous event of infrastructure occurred. Integrated control center consisted of conference room, control room to manage and analysis the data, server room to present the measured data and to collect the raw data. Early alarm system proposed realization of warning and response within 5 minute or less through development of sensor-based progress report and propagation automation system using the media such as MMS, VMS, EMS, FMS, SMS and web services of report and propagation. Based on this, the most effective u-Infrastructure Safety Management System is expected to be stably established at a less cost, thus making people's life more comfortable. Information obtained from such systems could be useful for maintenance or structural safety evaluation of existing structures, rapid evaluation of conditions of damaged structures after an earthquake, estimation of residual life of structures, repair and retrofitting of structures, maintenance, management or rehabilitation of historical structures.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.4
• /
• pp.208-219
• /
• 2021

In the era of the 4th industrial revolution driven by the convergence of ICT(information and communication technology) and manufacturing, research on smart factories is being actively conducted. In particular, the manufacturing industry prefers smart factories that autonomously connect and analyze data. For the efficient implementation of smart factories, it is essential to have an integrated production system that vertically integrates separately operated production equipment and heterogeneous S/W systems such as ERP, MES. In addition, it is necessary to double-verify production data by using automatic data collection technology so that the production process can be traced transparently. In this study, we want to show a case of data-centered integration of a large aircraft parts processing factory that requires high precision, takes a long time, and has the characteristics of processing large raw materials. For this, the components of the data-oriented integrated production system were identified and the connection structure between them was explained. And we would like to share the experience gained through the design and implementation case. The integrated production system proposed in this study integrates internal components based on data, which is expected to serve as a basis for SMEs to develop into an advanced stage, and traces materials with RFID technology.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.697-705
• /
• 2021

Currently, roadway operation agencies provide interior zones of tunnels with emergency information including crash, fire, and vehicles' stop, through state-of-the-art technologies such as variable message signs and radio-based broadcast systems. However, when coping with an emergency in tunnel interior zones, such information could be too late for drivers to access. A radio-based emergency alert system at the access zones of freeway tunnels, on the other hand,could be a good alternative for solving this problem. Therefore, the objective of this study is to assess user acceptability of such an alternative system. To carry out this study, an online survey was conducted on 762 drivers, and the survey results were analyzed using a structural equation modeling to identify factors affecting acceptability of the proposed system. As a result, driver characteristics such as age group, driving frequency, and driving career, utilization of conventional traffic information, and usefulness of conventional traffic information have a positive impact on acceptability. It is expected that the findings of the study will be a basis to effectively address and deploy a new emergency alert system at the access zones of freeway tunnels.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.48-56
• /
• 2012

One kind of crowdsourcing techniques which allow drivers to collect and provide traffic information using smartphones and applications is being introduced to ITS system as well. The introduction of crowdsourcing techniques requires changes in the existing ITS based on Insourcing which provide traffic information generated by detectors through VMS. ITS Information have had two problems, one is the high cost and the other is an interrupted service. Experts expect crowdsourcing technique which is created SNS, will overcome problems of ITS. But, there are not many examples and research results. Crowdsourcing technique was utilized in Jeju ATMS project to install ITS on the coastal round roads around Jeju since ITS to install point detectors turned out to be non-economic method in case of the coastal round roads with low traffic volume. However, there existed links in which traffic information cannot be generated as there were no smartphone users (crowds) even in the cost-effective crowdsourcing techniques, which indicates the fact that the crowdsourcing method is suitable for urban roads with many smartphone users, but not for local minor roads. On the contrary, insourcing-based ITS is considered to be non-economic method in applying to all roads in the city, but it can be effectively utilized in the local minor roads. Accordingly, Inter-sourcing based ITS operating system in which insourcing is connected with crowdsourcing was suggested in this study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.693-697
• /
• 2007

The SSB modem performs the modulation process which converts the digital voltage level to the audible frequency band signal and the demodulation process which converts reversely the audible frequency signal to the digital voltage level. The modulator and the demodulator are implemented with a single DSP chip. Because of the SSB specific character, the distortion occurs when the frequency is changed. This distortion has no effect on voice communication, but it has an significant effect on data communication. In other words, it is impossible to send data stream with adjacent 2 periods. Therefore, in case of using 2-tone FSK, it is needed to send at least 3 periods to transmit 1 bit. Therefore we implemented the modem using modified phase-delay shift keying to transmit 1 tone signal for high speed transmission. In the 1200[bps] mode, it generates 0, $187{\mu}s$ delay time at 1.3kHz symbol frequency, and in the 2400[bps] mode, 0, $70{\mu}s$, $130{\mu}s$, $200{\mu}s$ delay time at 1.5kHz symbol frequency. Finally, in the maximum 3600[bps] mode, it generates 0, $100{\mu}s$, $160{\mu}s$, $250{\mu}s$ delay time at 2.0kHz symbol frequency. The measured results of the implemented SSB modem shows a good transfer functional characteristic by spectrum analyzer, almost same bandwidth in pass band and 20dB higher SNR comparing the German PACTOR and American CLOVER and in the experimental transmitting test, we verified the transmitted data is received correctly in platform.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1852-1857
• /
• 2007

The SSB modem performs the modulation process which converts the digital voltage level to the audible frequency band signal and the demodulation process which converts reversely the audible frequency signal to the digital voltage level. The modulator and the demodulator are implemented with a single DSP chip. Because of the SSB specific character, the distortion occurs when the frequency is changed. This distortion has no effect on voice communication but it has an significant effect on data communication. In other words, it is impossible to send data stream with adjacent 2 periods. Therefore, in case of using 2-tone FSK, it is needed to send at least 3 periods to transmit 1 bit. Therefore we implemented the modem using modified phase-delay shift keying to transmit 1 tone signal for high speed transmission. In the 1200[bps] mode, it generates 0, $187{\mu}s$, delay time at 1.3kHz symbol frequency, and in the 2400[bps] mode, 0, $70{\mu}s\;130{\mu}s\;200{\mu}s$, delay time at 1.5kHz symbol frequency. Finally, in the maximum 3600[bps] mode, it generates 0, $100{\mu}s\;160{\mu}s\;250{\mu}s$ 2.0kHz symbol frequency. The measured results of the implemented SSB modem shows a good transfer functional characteristic by spectrum analyzer, almost same bandwidth in pass band and 20dB higher SNR comparing the emu FACTOR and American CLOVER and in the experimental transmitting test, we verified the transmitted data is received correctly in platform.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.2
• /
• pp.113-118
• /
• 2013

The current GPU virtualization techniques incur large overheads when executing application programs mainly due to the fine-grain time-sharing scheduling of the GPU among multiple Virtual Machines (VMs). Besides, the current techniques lack of portability, because they include the APIs for the GPU computations in the VM monitor. In this paper, we propose a low overhead and high performance GPU virtualization approach on a heterogeneous HPC system based on the open-source Xen. Our proposed techniques are tailored to the bio applications. In our virtualization framework, we allow a VM to solely occupy a GPU once the VM is assigned a GPU instead of relying on the time-sharing the GPU. This improves the performance of the applications and the utilization of the GPUs. Our techniques also allow a direct pass-through to the GPU by using the IOMMU virtualization features embedded in the hardware for the high portability. Experimental studies using microbiology genome analysis applications show that our proposed techniques based on the direct pass-through significantly reduce the overheads compared with the previous Domain0 based approaches. Furthermore, our approach closely matches the performance for the applications to the bare machine or rather improves the performance.