• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.242-245
• /
• 2012

본 보고서는 지상파방송 디지털 전환 과정에서 아직 전송방식조차 선정하지 못하고 있는 라디오의 디지털화 추진과 관련하여 AM 라디오의 DRM 전송방식에 의한 실험방송 조기 추진의 필요성과 의미를 설명하고, FM의 디지털화 역시 DRM+ 전송방식 중심으로 TV채널 5번과 6번 LOW-VHF 밴드 주파수 대역에서의 OUT-OF-BAND 방법으로 검토해 봄으로써 기존 FM송신기 및 안테나와 콤바인이 쉽고 우수한 신호 전달력을 가진 LOW-VHF대역 주파수를 효과적으로 활용할 수 있으며 각 사업자별로 출력지정과 권역설정이 자유로워 디지털시대에 맞는 새로운 서비스 환경 구축과 AM/FM대역 동일방식 디지털 라디오 보급을 할 수 있는 특징으로 인해 라디오의 디지털화 추진에 유리한 방안임을 확인해 보고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.517-529
• /
• 2011

In this paper, the parameters of the RTT (Radio Transmission Techniques) for SANET (Ship Ad-hoc NETwork), which is considered for the next generation maritime communication systems, are set up. A channel model has been analyzed based on the practical measured maritime wireless channel in VHF (Very-High Frequency) for SANET system. Also, by considering the frame structure including preamble, guard time and pilots for both single and multi-carrier systems, the BER (Bit Error Rate) performances are evaluated and analyzed in the aspects of channel compensation and channel coding techniques. Based on the simulation results, optimal modulation & coding schemes are suggested for SANET. That is, in single-carrier system by using differential modulation schemes, channel compensation is not necessary. However, channel coding is helpful to achieve additional gain. On the other hand, when 16-QAM modulation is employed in multi-carrier system, the implementation of both channel compensation and channel coding techniques show huge performance gain for various of K values, which are related to different maritime environments, and the rolling effects of wave.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.4
• /
• pp.305-313
• /
• 2013

As an FMT (Filtered Multi-Tone) transmission method of Wideband VHF communication system specified by the ETS (European Telecommunications Standards) EN 300 392-2, this paper introduces three existing realization methods, i.e., the direct filtering method using different band SRRC (Square-Root Raised Cosine) filters for each subcarrier, the PPN-DFT method using the IDFT-PPN (Poly-Phase Network) and PPN-DFT at the transmitter and receiver, respectively, and the Extended DFT method. Then, it proposes the extended IDFT-SDFT (Sliding Discrete Fourier Transform) that computes the DFT values only for interested subcarriers every sample time, and shows that it has an advantage of blind symbol timing (using no training symbol) individually for each user signal (independently of other users' signals) in the multi-user environment where the subcarriers are assigned in contiguous or interleaved blocks to each user and each user signal possibly experiences different channels.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2839-2846
• /
• 2014

New VHF band for use in VDE is determined by WRC-12 due to the overload of AIS VDL, and the system characteristics of the VDE is recommended as ITU-R M. 1842-1. CS-TDMA, a multiple access method of AIS class B, is recommended as that of the VDE. It is inefficient for CS-TDMA just applying the report interval used in AIS class B to transmit high speed data with higher payload in the aspect of efficiency. In this paper, a simulation is executed in order to determine adequate report interval according to the number of active ships that affects directly network traffic. To this end, the performance of CS-TDMA, which includes the number of received packets, reception success rate, channel utilization, and collision rate, is investigated via a simulation.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.693-699
• /
• 2013

In this paper, ${\pi}/4$-DQPSK modem according to ITU-R M.1842-1 recommendation Annex1 is investigated and simulated. At first, standardization and technical trend of VHF maritime mobile communication are introduced. The ${\pi}/4$-DQPSK modem defined in the Annex1 should support 28.8Kbps bit transmission rate within 25KHz frequency bandwidth. We describe the system model and simulation process of ${\pi}/4$-DQPSK modem transmitter and receiver design with RRC(Root Raised Cosine) transmitter and receiver filter. Then we suggest various graphical simulation results(time domain signals, constellation, power spectral density according to roll-off factor, eye diagram), and show simulated BER performance of the modem. From the simulation results, it is shown that roll-off factor of RRC filter affects to BER performance according to SNR and the designed simulation model meets the spectrum mask requirement suggested in ITU-R M.1842-1 recommendation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.91-96
• /
• 2017

In this paper, we proposed a meander sleeve monopole antenna for low earth orbit satellite communications. The antenna has broadband property with the planar monopole and ground of meander sleeve. Monopole and ground conductors of the antenna are on the same plane, and exited through coaxial cable feeding. In order to confirm the property of antenna parameters, it was used a commercial software, HFSS, For the antenna fabrication, a FR4 dielectric substrate has a dielectric constant of 4.4 was used. The size of the antenna was $600mm{\times}20mm{\times}1.6mm$. Frequency band of the fabricated antenna was 130MHz~151MHz, and the bandwidth was 20MHz. Measurement results of the fabricated antenna, the return loss is more than -10dB return loss in the band could be obtained. Radiation pattern has a maximum gain of 2.64dBi value.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.4
• /
• pp.13-25
• /
• 1991

Recently, according to the development of electromagnetic wave technique, more frequent and powerfull wave radiation becomes inevitable and so electromagnetic environments has become worse accordingly. Electromagnetic wave absorber is known the most effective preventive remedy to cope with the EMI/EMC problem. To realize broad-band electromagnetic wave absorber, triple layered structure where an air layer is interposed between a sintered ferrite layer and a ruber ferrite layer was adopted. Computer simulation for optimum design and evaluation of absorption characteristics has been made. The results shows that designed broad-band electromagnetic wave absorber can be useful for EMI/EMC problem, especially reducing TV ghosts in both VHF and UHF bands by additionally an air layer and a thin rubber ferrite layer on the surface of conventional ferrite, without replacing it.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.28-30
• /
• 2002

The PD in GIS leads to a charge transfer and a voltage drop across the discharge area. They cannot be measure directly but we can measure electromagnetic wave made by PD. In generally, compared with VHF band, electromagnetic waves of UHF band have a low noise therefore, we can detect the real defect with several pC in GIS using UHF method. In this paper, the U-slot microstrip patch antenna for measuring PD signal in GIS is presented. the proposed UHF sensor are designed to have large band characteristics and unaffected structure for GIS operation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.15-20
• /
• 2013

In narrowband communication systems operating in VHF and UHF bands, the performance degradation due to a frequency offset is inevitable. In this paper, we propose a frequency offset reduction scheme using the dual-band FSK modulation for narrowband communications. The proposed scheme not only offer a relatively reliable performance under a severe frequency offsets, but also can obtain a frequency diversity gain in Rayleigh fading channel.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.12
• /
• pp.75-82
• /
• 2010

This paper presents a wideband ${\Delta}{\Sigma}$ fractional-N frequency synthesizer for a multi-band single chip CMOS RFIC transceivers. A wideband VCO utilizes a 6-bit switched capacitor array bank for 2340~3940 MHz frequency range. VCO frequency calibration circuit is designed for optimal capacitor bank code selection before phase locking process. It finishes the calibration process in $2{\mu}s$ over the whole frequency band. The LO generation block has selectable multiple division ratios of ${\div}2$, ${\div}16$, and ${\div}32$ to generate LO I/Q signals for T-DMB/DAB/FM Radio systems in L-Band (1173~1973 MHz), VHF-III (147~246 MHz), VFH-II (74~123 MHz), respectively. The measured integrated phase noise is quite low as it is lower than 0.8 degree RMS over the whole frequency band. Total locking time of the ${\Delta}{\Sigma}$ frequency synthesizer including VCO frequency calibration time is less than $50{\mu}s$. The wideband ${\Delta}{\Sigma}$ fractional-N frequency synthesizer is fabricated in $0.13{\mu}m$ CMOS technology, and it consumes 15.8 mA from 1.2 V DC supply.