• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.266-271
• /
• 1999

The purpose in this study has to development the system on increasing operation of old-typed transceiver for solve the question that limited allocation frequencies and continuesly icreasment of traffic. Therefore, we are desigened the remote control system that has the function for variable channels, PTT and monitoring of transmission power and frequencies. Exchange of control data is to hold in common the twist two-wire or telephone line for the voice transmission. The H/W is consist of FSK and MCS-51 processor which are up-down control of channel, n control and monitoring display by serial data transmission. According to the simplex traffic operation is designed the algorithm of serial data transmission by sequential transmission sequence and protocol. The S/W of sequential transmission sequence is designed to usefully the intergrated communications system which is able to connection between the multi-transceiver and multi-terminal by master processor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.1
• /
• pp.84-92
• /
• 1989

The purpose of this paper is to demonstrate the effect of a FH spread spectrum communication interference in TV channels and frequency compatibility in 30-88 MHz frequency band. To calculate this interferece, the strength of electric field of TV signals is derived as a function of distance between TV transmitter and receiver. An interference model is established based upon thefield strength by using the relation between the transmitted power of FH spread spectrum communications and the distance between the TV image signals, which makes TV screen a cceptble, Simultaneous transmission of FH sprea spectrum signals and TV signals is shown to be feasible, as far as the interference level is lower than the TV image signal level by 23.5dBm. As a result of frequency analysis and experiment, the FH spread spectrum communication can be used together with TV channels.

• Standardization Trend in Telecommunications
• /
• s.24
• /
• pp.224-232
• /
• 1992

페이징 시스템의 발달과 시행은 오늘날 특정 영역 내에서의 진보가 다른 영역의 균형있는 발전에 얼마나 많이 의존하고 있는가를 보여주는 전형적인 예이다. 과거의 페이징 시스템은 한 공장의 근로자에게 혜택을 주었다. 위성을 이용하는 미래의 페이징 시스템은 전세계 모든 곳의 모든 사람에게 다양한 혜택을 제공해 줄 수 있게 된다. 점진적으로, 한 쌍의 킬로미터와 점선으로 연결된 전구와 벨은 처음으로 무선시스템으로 대체되어 한 국가라는 지역을 넘어서 서비스를 제공해 왔다. 디지털 기술의 개발을 포함해서, 무선 설비가 소형화 됨에 따라 이러한 일은 점차적으로 이루어져 왔다. 따라서 전기통신에 의한 우주 무선통신과 특히 정지위성 시스템의 엄청난 발전으로 전세계는 가까워지게 되었지만 거의 엄청난 비용과 이용자들이 갖춰야할 것들 때문에 이러한 영역에 접근하는 것은 거의 한정되어 방송용으로만 준비되어 왔다. 오랫동안 LEO 위성은 과학적, 군사적인 용도로만 이용되어 왔는데 그것은 이 위성이 원래 가지고 있는 문제점들로 하루마다 지평선 위의 아주 짧은 통행로와 관계된 것 때문이었다. 그러나 현재는 하나의 시스템을 형성하기 위해 수많은 LEO 위성들의 발사를 감당해 낼 수 있는 장치와 여러 영역에서의 공동작용(synergy) 덕분에, VHF대의 아주 저렴한 시설을 이용한 경제적, 기술적 장점을 인식하고, 혼신을 다하여 다이내믹 채널 활동지점 시스템(denamic channel activity assignment system)을 개발하였고, 마지막으로 말하지만 결코 가볍게 인식해서는 안될 WARC-92가 필요한 주파수대를 지정해야한다는 의도를 밝힌 것 등이 개인간의 통신을 전세계적으로 확대하는데 있어서 디딤돌이 될 것이다.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.572-588
• /
• 2013

In this paper, 4K-UHDTV or 8K-UHDTV and UHD-3DTV that the next generation broadcasting implementation and the possibility of direct receiving environment construction is analyzed on the terrestrial broadcasting. Particularly, we investigated the possibility by analyzing the previous and related works with regard to UHDTV transmission by DVB-T2 that is one of the best commercialized transmission mode. In order that the UHDTV broadcasting succeeds once again after completion of digital terrestrial switch over at the end of 2012, the ultra high resolution image transfer is important. However, the direct, the indoor and ubiquitous receiving environment is important in not only TV but also the personal type multimedia terminal in the sense of UHDTV service penetration. Therefore, in this paper, by using SFN and high error-correcting mode in DVB-T2 standard, the efficient frequency utilization and effective reception environment construction is illustrated. Particularly, SFN network constitution by 2 mutually different frequencies including the VHF bandwidth and UHF band, and etc. is shown. And the method that builds the free wireless receive environment by using SFN low power radio repeater and for home use gap filler is proposed. And the effect and frequency amount required are presented, when UHDTV broadcasting use 10MHz bandwidth.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.339-343
• /
• 2022

In this study, a method for simplifying the structure of the VDES RF receiver, and the gain control method of the receiver to comply with the international standard in this structure was described. The input level of the wanted signal and unwanted signal to the receiver was defined, and when the two signals were input, the saturation state at the ADC was checked at the receiver output. As a result of the simulation by the circuit simulator, it was satisfied that the output power of the receiver was in the SFDR region of ADC with respect to the adjacent channel interference ratio, intermodulation, and blocking level. Through this study, it was found that the structure of th proposed RF receiver conforms to the international standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.482-489
• /
• 2010

In this paper we have proposed a new architecture of DQ-IRM(Double-Quadrature Image Rejection Mixer) for image rejection in the low-IF receiver. It consist of a frequency-tunable RF PPF(Poly Phase Filter) and the quadrature mixers. The conventional DQ-IRM generates the quadrature RF signals for the RF wide band at once. But the proposed DQ-IRM with the frequency-tuable RF PPF generates the quadrature RF signals for the narrow band of 2~3 channels bandwidth, which is partitioned from the RF wide band. We designed the CMOS RF tuner for T-DMB(Terrestrial Digital Multimedia Broadcasting) with the proposed 3rd DQ-IRM using a 0.18um CMOS technology and verified the performances of the designed receiver such as the image rejection ratio, the noise figure and the power consumption. The overall NF of the RF tuner is about 1.26 dB and the image reject ratio is about 51 dB. The power consumption is 55.8 mW at 1.8 V supply voltage. The chip area is $3.0{\times}2.5mm^2$.