• Journal of Korean Society of Disaster and Security
• /
• v.15 no.1
• /
• pp.1-12
• /
• 2022

An automatic optimization technique is used to estimate the optimal parameters of the hydrologic model, and different hydrologic response results can be provided depending on objective functions. In this study, the parameters of the event-based rainfall-runoff model were estimated using various objective functions, the reproducibility of the hydrograph according to the objective functions was evaluated, and appropriate objective functions were proposed. As the rainfall-runoff model, the storage function model(SFM), which is a lumped hydrologic model used for runoff simulation in the current Korean flood forecasting system, was selected. In order to evaluate the reproducibility of the hydrograph for each objective function, 9 rainfall events were selected for the Cheoncheon basin, which is the upstream basin of Yongdam Dam, and widely-used 7 objective functions were selected for parameter estimation of the SFM for each rainfall event. Then, the reproducibility of the simulated hydrograph using the optimal parameter sets based on the different objective functions was analyzed. As a result, RMSE, NSE, and RSR, which include the error square term in the objective function, showed the highest accuracy for all rainfall events except for Event 7. In addition, in the case of PBIAS and VE, which include an error term compared to the observed flow, it also showed relatively stable reproducibility of the hydrograph. However, in the case of MIA, which adjusts parameters sensitive to high flow and low flow simultaneously, the hydrograph reproducibility performance was found to be very low.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.4
• /
• pp.3-13
• /
• 2009

When promoting BTL(Build Transfer Lease; below BTL) project, negotiation is a stage of examining observation and reflection of RFP(Request for Proposal below RFP) in terms with facilities, operating and financing. It keeps an important position in whole process. However, there is no consistent guideline or model which helps evaluating the result of negotiation. It is difficult to apprise the quantitative outcome after executing negotiation. Thus, this study presented the Value Engineering -based process and model of estimating the outcome of negotiation for the purpose of estimating and verifying the result of negotiation objectively, Evaluating factors of negotiation were classified into 6 fields, 38 divisions and 135 items, focused on cultural facilities on BTL project. Weight of every factor was estimated, and quantitative checklist was established. This study presented the model which could measure the outcome of negotiation. This result would be a critical checklist before negotiation on BTL project, an index of feedback during negotiation, and also a standard of estimating the outcome after negotiation.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1186-1195
• /
• 1993

The Japanese type combine harvester has adopted rubber crawlers for the driving mechanism from first production . However, combine harvesters with movable track rollers in the rubber crawler system have been adopted recently for the purpose of stability at the time of climbing over the footpaths between rice fields, as the results of the machines becoming large. However, the dynamic characteristics of movable track rollers have not been clarified. For this reason, the design of movable track rollers depends on trial and errors. It is known that vibration characteristics of the vehicle with movable track rollers are different from the vibration characteristics of the vehicles with fixed track rollers even though the track roller arrangements are the same. Therefore, the theoretical analyses of movable track rollers must be hurried in order to formulate a reasonable track roller arrangement design. the authors have studied the vibration characteristics of the rubber crawler ve icle with fixed track rollers. in this study, the dynamic model of the vehicle with movable track roller sis compared with the dynamic model of the vehicle with fixed track rollers. Next, motions are simulated to analyze the movable track rollers by expanding the motion equation which were constructed for the dynamic model of the fixed track rollers.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.5
• /
• pp.153-160
• /
• 2020

Energy Consumption Predictions for Industries has a prominent role to play in the energy management and control system as dynamic and seasonal changes are occurring in energy demand and supply. This paper introduces and explores the steel industry's predictive models of energy consumption. The data used includes lagging and leading reactive power lagging and leading current variable, emission of carbon dioxide (tCO2) and load type. Four statistical models are trained and tested in the test set: (a) Linear Regression (LR), (b) Radial Kernel Support Vector Machine (SVM RBF), (c) Gradient Boosting Machine (GBM), and (d) Random Forest (RF). Root Mean Squared Error (RMSE), Mean Absolute Error (MAE) and Mean Absolute Percentage Error (MAPE) are used for calculating regression model predictive performance. When using all the predictors, the best model RF can provide RMSE value 7.33 in the test set.

• KIEAE Journal
• /
• v.11 no.2
• /
• pp.113-122
• /
• 2011

About 30% of the total annual energy consumption on the earth is used in the architectural activities, including construction, maintenance management, and demonstration of a building. Also, 40% of the natural resource consumption, 50% of $CO_2$ emissions, and 20%~50% of industrial waste emissions are produced from a building. Unfortunately, the percentage of its energy consumption is staidly increasing year by year, about 8% every year, and it recently causes a sustainable architectural concept to come to the fore globally. Indeed, the importance of the sustainable architecture is increasingly becoming a worldwide trend. BIM(Building Information Modeling) is considered a new paradigm and a powerful method in building design, construction and maintenance. BIM has characteristics similar to a building's systems. All of the components in a model have a parametric relationship to each other. Understanding and capitalizing on these interrelationships typically takes numerous iterations that span multiple projects. Optimizing the integrated strategies and technologies for a high-performance, sustainable design requires a continual look at understanding how they work together to deliver the best potential. Throughout all of these concepts, we are going to be using a variety of tools that revolve around a BIM model. Some of the tools will require a heavier use of BIM than others, but all of them will utilize the model geometry you've created as part of your design. This study presents importance and validity of energy performance analyzation in the pre-design phase for the sustainable architecture with the support of Building Information Modeling (BIM) technology.

• International journal of advanced smart convergence
• /
• v.3 no.1
• /
• pp.20-24
• /
• 2014

To compare body signal, was designed the F-B function system on the body movement for the comfortable state. To detect subject of the normal state, was decided on the base of physical signal in the body movement. There are to detect the condition of Vision, Vestibular, Somatosensory and CNS. Vision condition was verified a variation of greater average (Vi-${\Phi}_{AVG-AVG}$) was presented slightly greater at $17.424{\pm}9.65$ unit. Vestibular condition was identified a variation of slightly greater average (Ve-${\Phi}_{AVG-AVG}$) was presented at $9.068{\pm}1.478$ unit. Somatosensory condition was checked a variation of smaller average (So-${\Phi}_{AVG-AVG}$) was presented slightly smaller at $2.79{\pm}0.419$ unit. CNS condition was confirmed a variation of diminutive smaller average (C-${\Phi}_{AVG-AVG}$) was presented slightly larger at $0.557{\pm}0.153$ unit. As the model depends on the F-B function system of body movement, average values of these perturbation were computed F-B function comparison data. These systems will be to infer a data algorithm and a data signal processing system for the evaluation of the stability.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.190-194
• /
• 2007

In most countries, mobile subscribers are already experiencing 3G-like services. At the moment of launching 3G services, lots of studies showed estimates of the number of subscribers for 3G services, using long-term demand curves, econometric methods or survey methodologies. Those studies mainly focused on the potential number of subscribers and the point of rapid growth rather than precise estimates for the services. Even though we've already experienced parts of 3G services, full length of 3G services are expecting in near future. Therefore, now we need to have more accurate estimates for 3G services. While we thought that 3G services were moved from 2G, in real place 3G services are being evolved from 2G services. In the process of evolving, regulators' policy affects service demand and diffusion significantly. For the more accurate estimates, we need to consider policy issues which influence service diffusion practically in real place. This study aims to present a model which shows better estimates for 3G services with consideration on policy issues, such as numbering issues, price regulation, and competition policy. The consideration can provide more accurate estimates for 3G services with service providers. The methodology could help academicians In forecasting of similar telecommunications services as well.

• The Korean Journal of Nuclear Medicine
• /
• v.27 no.2
• /
• pp.248-255
• /
• 1993

To Assessment of the quantified renal uptake rates in every $^{99m}Tc$-DMSA scan tests of patients is actually difficult because of time consumption and complicated calculations required to measure the correct dose of the infused radionulide and radiation decay, the adjustment for the depth of kidney and the subtraction of background count. We've formulated two regression models for the quantified renal uptake rates[I] from the simple renal uptake rates[H] with a square shaped ROI (Region-Of-Interest) in 25 cases (Group 1) and with a kidney shaped ROI in 37 cases (Group 2), respectively. The regression model for the Group 1 was $[I]_1$=0.885 $[H]_1$-4.575 (P<0.005), and for the Group 2 was $[I]_2$=0.591 $[H]_2$-2.105 (p<0.005). The formal charts were clinically convenient to evaluate the individual renal functions in patients with $^{99m}Tc$-DMSA renal scan.

• Microbiology and Biotechnology Letters
• /
• v.44 no.4
• /
• pp.409-419
• /
• 2016

Filamentous Aspergillus spp. are the most common fungi in our environment and can be beneficial and/or pathogenic to humans. Many Aspergillus spp. reproduce by forming asexual spores and can synthesize various secondary metabolites. A series of studies has revealed that Velvet regulators are fungus-specific transcription factors coordinating fungal growth, development, and secondary metabolism in the model fungus Aspergillus nidulans. Proteins of the Velvet family form various complexes that play diverse roles in the life cycle of A. nidulans. In other Aspergillus spp., proteins of this family are highly conserved and coordinate asexual development and secondary metabolism. This review summarizes the functions of Velvet proteins in Aspergillus spp.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.18-21
• /
• 1995

When we inject drugstuffs to a patient for a long time, it is important to control proper injection amount and flow rate. Since inproper injection amount and a flow rate would cause bad a recovery a patient, the relience of sensors which detect injection amount is an important factor for whole injection systems' performance. In this research, we've compared the suitability of three sensors for injection pump monitoring system. The three types of sensors, piezo film sensor, photo transistor made up with three transmitting photodiodes and receving photodiode, and photo array, were selected for comparing. Using suggested data processing technique and photo amy sensors, we could minimize the effect of interference, disturbance, illumanation change, and sensitivity change caused by sensor's position. According to the experiments, the photo amy showed the higher reliance than any other the three types of sensors. The developed systems could be the foundation of beginning home production of infusion pump system and available for the base model of whole monitoring and control systems.