• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1439-1443
• /
• 2007

In this paper, vibration reduction techniques of a voice coil motor (VCM) actuator are presented for AFM imaging system. The damping coefficient of the actuator driven by VCM with a flexure hinge is quite low and it cause the about 30dB peak amplitude response at the resonance frequency. To decrease this peak response, we design and apply elliptical band-stop filters to xy and z axis VCM actuator. Frequency response of each actuator with filter is measured to verify the effect of the filters. As a sensor, capacitive sensor is used. Vibration reduction rate of the xy actuator with the filter is also measured while real AFM scanning condition. As another method, closed loop control with the capacitive sensor is applied to the xy axis actuator to add an electrical damping effect and vibration reduction rate measured. These vibration reduction rates with each method are compared. In the case of z axis actuator, the frequency response of force (gap) control loop is measured. For comparison, the frequency response using a conventional PID controller is also obtained. Finally, the AFM image of a standard grid sample is measured with the designed controller to analyze the effect in the AFM imaging.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.12
• /
• pp.1207-1222
• /
• 2004

In this paper, the explicit equations on the power consumption and sensitivity ratio of VCM-type actuator for disk drive are proposed. The power consumption and sensitivity ratio is derived in frequency domain. The power consumption during the track following of the actuator can be described well in frequency domain and it can be used to calculate the total power dissipation of the actuator which is needed to compensate the tracking and focusing errors. Also, the sensitivity ratio of an actuator is derived by using the reference servo of a disk drive and will be used to optimally obtain the performances of the actuator. This sensitivity ratio can persuasively explain the basis of the target performances of the actuator in the considerations of the reference servo. The usefulness of the proposed equations for the sensitivity ratio and power consumption of an actuator is shown by a lot of simulations. In the near future, we will verify the simulation results by experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.307-309
• /
• 2011

The recently-released camera modules assembled into high-end handsets generally carry auto focusing function. The resolution size of the camera modules is getting higher, and customers demand more precise and stable auto focusing function. When auto focusing function is getting performed, the camera modules applied to VCM usually have the problems, which are an error of lens focusing position and resolution deviation according to the shift of one's position. For this reason, I propose Hybrid VCM that has an improved structure for a stable work of actuator and higher resolution level.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.331-335
• /
• 2012

Many researches have been performed the analysis and experiments on auto-focus lens due to the development of camera module which is used in mobile-phone recently. Various types of voice coil motor are used mostly in the view point of actuators. Various type of magnetic flux flow is made by the combination of magnet, coil and yoke, etc. And the function of auto-focus is made by the proper combination of the lens components. In this research, some of the simple and economic structure is chosen to investigate the characteristics analytically among various types of lens which are used in industries. Desired level of lens module design was achieved by electromagnetic analysis using ANSYS$^{TM}$ finite element analysis program.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.11a
• /
• pp.79-81
• /
• 2022

MPEG-VCM(Video Coding for Machines)에서는 머신비전(machine vision) 네트워크의 백본(backbone)에서 추출된 이미지/비디오 특징 압축을 위한 표준화를 진행하고 있다. 현재 VCM 표준기술 탐색 과정에서 가장 좋은 압축 성능을 보이는 MSFC(Multi-Scale Feature compression) 기반 압축 네트워크 모델은 추출된 멀티-스케일 특징을 단일-스케일 특징으로 변환하여 특징맵으로 구성하고 이를 VVC 로 압축한다. 본 논문에서는 MSFC 기반 압축 모델에서 Min-Max 값 시그널링을 제외한 최소-최대(Min-Max) 정규화를 포함한 개선된 특징맵 생성 기법을 제시한다. 즉, 제안기법은 VCM 디코더에서의 특징맵 복원을 위한 Min-Max 값을 학습 기반으로 생성함으로써 Min-Max 시그널링의 비트 오버헤드 절감뿐만 아니라 별도의 시그널링 기제를 생략한 보다 단순한 전송 비트스트림 구성을 가능하게 한다. 실험결과 제안기법은 이미지 앵커(Anchor) 대비 BPP-mAP 성능에서 83.24% BD-rate 이득을 보이며, 이는 기존 MSFC 보다 1.74%정도 다소 떨어지지만 별도의 Min-Max 시그널링 없이도 기존의 성능을 유지할 수 있음을 보인다.

• ETRI Journal
• /
• v.46 no.3
• /
• pp.538-549
• /
• 2024

A conventional codec aims to increase the compression efficiency for transmission and storage while maintaining video quality. However, as the number of platforms using machine vision rapidly increases, a codec that increases the compression efficiency and maintains the accuracy of machine vision tasks must be devised. Hence, the Moving Picture Experts Group created a standardization process for video coding for machines (VCM) to reduce bitrates while maintaining the accuracy of machine vision tasks. In particular, in-loop filters have been developed for improving the subjective quality and machine vision task accuracy. However, the high computational complexity of in-loop filters limits the development of a high-performance VCM architecture. We analyze the effect of an in-loop filter on the VCM performance and propose a suboptimal VCM method based on the selective activation of in-loop filters. The proposed method reduces the computation time for video coding by approximately 5% when using the enhanced compression model and 2% when employing a Versatile Video Coding test model while maintaining the machine vision accuracy and compression efficiency of the VCM architecture.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.467-468
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.651-652
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.937-938
• /
• 2008

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.911-914
• /
• 2003

As high-capacity disk drives pow in track density, the allowable level of PES is becoming smaller. In this paper, some design concept of actuator is introduced to suppress the Butterfly mode that imposes the fundamental limitation on servo bandwidth. The effect of dynamics of proposed actuator on PES is examined by simulation.