• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.109-113
• /
• 2005

We have studied a field sequential liquid crystal display (FSLCD) with electrically controlled birefringence (ECB). The ECB mode exhibiting fast response time, high transmittance, low operating voltage and adequate viewing angle. The positive liquid crystal (LC) is better than negative LC on dielectric anisotropy, birefringence and rotational viscosity. Because $K_{11}$ value out of the elastic coefficient of LC is also larger than $K_{22}$ value, decay time of VA-ECB is advantage. However, the transmittance & response time reduced with decreasing the cell gap. This drawback can be overcome by using LC with high ${\Delta}n$ but VA-ECB is occured loss of light efficiency because the $\gamma$ value increased by high ${\Delta}n$ of LC. Consequently, the HA-ECB mode is one of strongest candidate for FSLCD application.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.683-686
• /
• 2006

Accompanied by the demand of thin type TV, the application of the TFT LCD display device is more and more extensive. The key material which influences the optical performance of the TFT LCD is optical film. Due to the rapid development of the big size TFT LCD for the recent years, the supply has been unable to meet the demand for its relative material. Therefore, we bring up a alternate choice-the hybrid compensation film which could not only show well optical performance, but also lessen the quantity of usage in TAC in order to make the optical film free of shortage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.179-182
• /
• 2005

현재 액정 표시장치는 액정의 유전율 이방성 특성에 따라 Positive LC 와 Negative LC로 구분되어 개발 된다. Positive LC에는 TN(Twisted Nematic)모드와 IP(In Plane Switching) 모드가 있다. Negative LC에는 VA(Vertical alignment) 모드가 있다. 데이타 전압을 교류구동 시키므로, LCD Pixel들은 극성반전을 하게 되며, 이때 특정 Pattern에서 화면상에 비정상적인 색깔이 나타난다. 특정 Pattern이란 데이타 전압이 교류구동을 할 때, Vcom Level이 데이타 전압에 의한 Coupling 때문에 왜곡이 발생되고, 이 왜곡에 의하여 레드, 그린, 블루 Pixel의 충전을 차가 발생해서, 화면의 좌우는 적색편향 하게 보이고, 중앙은 녹색편향 발생된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.430-432
• /
• 2005

Although color characteristics of IPS mode are much better than TN or VA mode, there still remains a room for improvement of the color characteristics of IPS mode compared with the conventional CRT. It has been generally as sumed that inherent color variation of IPS mode is entirely owing to dependence of the effective retardation on wavelength and role of optical axis of IPS mode has been little considered. In this study, we investigated the effects of driving voltages on the effective retardation and the effective optical axis by a computer simulation. The result shows that rotation of effective optical axis is dependent on wavelength and tends to be smaller for larger wavelength.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.68-71
• /
• 2003

To be able to show moving images without visual problems like blurring and tailing, the response time of liquid crystal display (LCDs) must be improved. In this paper we will discuss our progress in improving the response time by optimizing the cell configuration and the use of new liquid crystal mixtures. A 20.1inch diagonal UXGA IPS TFT-LCD has been developed having a response time as fast as l-frame time (16msec) for white-black operation and less than 16msec in all gray levels without applying ODC (Over Driving Circuit). This is very important because one of the technology to reduce motion blurring, the use of scanning backlight is conditioned by 16msec for all grays. The excellent gray-to-gray response can be explained by virtue of fundamental characteristics of S-IPS mode and makes a good contrast with the results of VA mode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.39-40
• /
• 2009

The patterned vertical alignment (PVA) display showed good electro-optic properties such as wide viewing angle, fast response time, high Contrast Ratio. However, the device has patterned electrode on both top and bottom electrodes which requires high accuracy of assembling of top and bottom substrates in order to exhibit a high performance. So, they have disadvantage about low yield. In order to resolve these problem, in this paper, we studied about top substrate pattern free vertical alignment device associated with surface polymer stabilization using the UV curable monomer. This method shows simple progress, low cost and good electro-optic properties such as high transmittance and fast response time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1058-1061
• /
• 2004

Recently, According to companies of TFT LCD are making large sized products more and more. In the vortex of Products with a monitor and LCD TV is applied in a technique of a high viewing angle(FFS, IPS, VA). Also, as a high luminance, high speed response time, high degree of a color purity, and so on are continuing to develop a high performance, it is necessary to improve a specific character of high luminance that apply to LCD TV as a LCD BLU. Because a LCD panel for TV usually has a lower resolution that compare to a monitor, the structure of present backlight system can't put out its power even though it has a merit in transmission. Therefore, the examination of improvement about the high luminance direct typed BLU for LCD TV that presupposes several uses of CCFL(Cold Cathode Fluorescent Lamp) or EEFL(External Electrode Fluorescent Lamp)is actively being progressed. Although it is necessary to increase the number of lamps for applying high performance by the direct type, in this case, because we can design the character of luminance for adoption of high performance. We can satisfy with a level of luminance for LCD TV. Accordingly, we analyzed a change of the number of CCFL, mechanical and optical character to produce the direct typed backlight in 32inches spec. Consequently, we achieved luminance of 6597nit,which was including polarization film, and secured the standard for LCD TV.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.433-433
• /
• 2007

In this paper, we investigated the feasibility of applying ZnO:Al films to display devices as transparent electrodes, and reported the electro-optical (EO) characteristics of VA cells using ZnO:Al electrodes and compared them with those of VA cells using ITO electrodes. The experiment results show that a uniform vertical LC alignment and a large pretilt angle were achieved. Also, the good voltage-transmittance curve, response time, and capacitance-voltage characteristics were observed for the rubbing aligned VA-LCD using ZnO:Al electrodes m comparison with ITO electrodes. In other words, the vertical alignment mode based on the ZnO:Al electrodes showed appropriate electro-optical characteristics and high transparency in comparison with that based on the ITO electrodes. These results indicated that the transparent ZnO:Al electrodes of the liquid crystal displays could substitute the ITO electrodes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.571-574
• /
• 2003

Three ring type liquid crystalline compounds having 4-alklycyclohexyl group, 1,2-difluorobenzene and phenylisothiocyanate moieties as main skeleton were designed to have negative dielectricity. However, the compounds with 2,3,2'-trifluoro-3'-isothiocyanated biphenylcyclohexane core did not exhibit the nematic liquid crystalline phase because of two conformers by interaction of isothiocyanate and adjacent fluorine atoms. Also, 4-alkyl-2,2',3'-trifluoro-3-isothiocyanated biphenylcyclohexane core was designed expecting to have uniform conformers of isothiocyanate group. In the course of developing polyimides for VA mode LCD, we synthesized alkyl-3,5-diaminobenzene efficiently with various length of alkyl chains from commercially available di-t-butyl malonate and 3,5-dinitrobenzoyl chloride as starting material.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.471-474
• /
• 2002

Three-ring types liquid crystalline compounds having fluoro and isothiocyanate substituent were synthesized and their physical and electro-optical properties were measured to evaluate the applications to active matrix VA liquid crystal displays. The tetrakis(triphenylphosphine)palladium(0) catalyzed cross coupling of aryl boronic acids with aryl halides is used to prepare trans-4'-Alkoxy-2,3-difluoro-3'-isothiocyanato-4-(4-alkylcyclohexyl}-biphenyl series. The synthesized compounds showed the nematic liquid crystalline phase and the negative dielectric anisotropy. The prepared mixtures showed faster response time and lower threshold voltage than their host mixture.