• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.133-136
• /
• 2000

We investigated the improvement of viewing angle using a patterned double twisted (PDT) vertical-alignment (VA) cell mode on a homeotropic alignment layer. Good voltage-transmittance curves for negative dielectric anisotropic nematic liquid crystal (NLC) using the PDT-VA cell without a negative compensation film were obtained. The viewing angle of the PDT-VA cell without a negative compensation film was wider than that of a conventional VA cell.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.401-402
• /
• 2008

We proposed a single gap transflective liquid crystal display (LCD) using a vertically aligned (VA) liquid crystal cell and circular polarizer. The conventional VA transflective LCDs have problems that there required several compensation films and voltage-dependent transmittance and reflectance curves do not match each other. To solve these problems, we used circular polarizer and optimized the condition of insulator thickness in the transmissive part and reflective part. Also, we used the patterned vertical alignment (PVA) mode for wide viewing angle in transmissive part. Consequently, this device realized transflective LCD with a single cell gap and single gamma curve.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.53-56
• /
• 2003

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA-$\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA-$\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• Journal of Information Display
• /
• v.5 no.2
• /
• pp.23-26
• /
• 2004

For high end, large area displays, all current LC modes require some degree of optical compensation to improve the front of screen viewing experience. Currently most optical films are laminated to the outside of the LCD cell, between the glass and polariser. In this paper we wish to show how it is possible to integrate the compensating optical film within a VA mode LCD cell. The paper will describe the process of making the biaxial film through the process of in-situ photopolymerisation of an aligned film of reactive mesogens in the cholesteric phase using polarised UV light. The film can be made on the colour filter array side of the LCD panel. In addition the process of fabricating a VA mode LCD containing this film will be described and the performance of this module will be presented.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.545-548
• /
• 1999

The electro-optical characteristics of photo-aligned vertical-alignment (VA)-liquid crystal display (LCD) with non-polarized ultraviolet (UV) light irradiation of 45\`on homeotropic polyimide (Pl) surface were investigated. LC alignment on photo-aligned VA-LCD is attributed to photo-depolymerized reaction of the polymer with non-polarized UV light irradiation on PI surface. We had good voltage-transmittance (V-T) characteristics of photo-aligned VA-LCD. The response time of photo-aligned VA-LCD was slower than that of the rubbing-aligned VA-LCD. Finally, we suggest that the slow response time of photo-aligned VA-LCD depends on the LC domain.

• ETRI Journal
• /
• v.25 no.6
• /
• pp.489-502
• /
• 2003

This paper presents an MPEG-4 video codec, called MoVa, for video coding applications that adopts 3G-324M. We designed MoVa to be optimal by embedding a cost-effective ARM7TDMI core and partitioning it into hardwired blocks and firmware blocks to provide a reasonable tradeoff between computational requirements, power consumption, and programmability. Typical hardwired blocks are motion estimation and motion compensation, discrete cosine transform and quantization, and variable length coding and decoding, while intra refresh, rate control, error resilience, error concealment, etc. are implemented by software. MoVa has a pipeline structure and its operation is performed in four stages at encoding and in three stages at decoding. It meets the requirements of MPEG-4 SP@L2 and can perform either 30 frames/s (fps) of QCIF or SQCIF, or 7.5 fps (in codec mode) to 15 fps (in encode/decode mode) of CIF at a maximum clock rate of 27 MHz for 128 kbps or 144 kbps. MoVa can be applied to many video systems requiring a high bit rate and various video formats, such as videophone, videoconferencing, surveillance, news, and entertainment.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.118-119
• /
• 2003

휴대용 통신기기의 발달로 인해 실내 및 실외 환경에서 높은 성능을 발휘하는 LCD 소자가 요구되고 있다. 후면광원을 사용하는 투과형 LCD는 실내 혹은 어두운 곳에서 높은 휘도와 명암대비비를 가지는 반면 실외나 밝은 곳에서는 높은 휘도 및 명암대비비를 보일 수 없다. 그에 반해 반사형 LCD는 주변광을 광원으로 사용하므로 실외 혹은 밝은 곳에서의 전기광학 특성이 양호한 장점이 있지만 실내 및 어두운 곳에서의 사용이 제한된다. (중략)

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.156-158
• /
• 2009

New liquid crystal (LC) host mixtures and reactive mesogens (RMs) designed for the Polymer Sustainable Vertically Aligned (PS-VA) mode have been developed. The novel combination of LC host mixture with RMs enables to show superior LC display performance with high reliability and to contribute for the robust LC panel production process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.49-50
• /
• 2006

We have developed vertical alignment liquid crystal display (VA-LCD), of which the viewing angle can be controlled. The VA-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using one homogeneous aligned (HA) LC layer and one compensation film with a negative C-plate. The retardation of the HA layer at off axis can be controlled by applying an electric field while keeping the retardation value to be zero at normal direction. Consequently, the device exhibits a viewing mode over $170^{\circ}$ in terms of CR = 10 in wide viewing mode and about $60^{\circ}$ in terms of CR = 2 in narrow viewing angle mode m horizontal direction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.65-67
• /
• 2003

LCD TV market is rapidly growing. It is forecasted that the main size of the LCD TV will be about 20" to 52". The IPS mode is going to lead the large TFT LCD technology for TV application among other LC modes which are VA mode, WVTN mode and so on, because the display image quality of the IPS mode is superior to others.