• Korean Journal of Poultry Science
• /
• v.32 no.2
• /
• pp.107-112
• /
• 2005

This study was conducted to establish a comprehensive grading guideline for poultry. Guidelines for sampling size and grading were determined on the basis of survey data obtained from chicken processing house. Results were summarized as follows : For application unit, most chicken processing house preferred lot unit to farm unit. Most processing house did not want the total survey method, but selection sampling. At the beginning of the grading system, chicken processing house wanted to apply the system to a particular lots for which the company requests. There were much suggestions for grading not only portion meat, but also whole chicken. Bigger processing house preferred no. $8\~12$ to be graded. Most of large-scale processing houses used more than 81 volts for stunning and cooling tanks by soaking. For shipping chicken, Large-scale processing houses used both individual and box packing while small ones only used box packing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.94-99
• /
• 1994

최근 인구의 과밀화와 이에 따른 지가의 상승 등으로 대표적인 주거용 빌딩인 아파트의 고층화가 급속하게 진행되고 있고 아파트에 설치되는 엘리베이터도 점차 대형화, 고속화 되고 있다. 실례로 15층 아파트의 경우 11인승, 60m/min의 엘리베이터가 일반적으로 사용되는 반면, 20층 아파트의 경우 17인승, 90m/min이 주로 사용된다. 이와 같이 엘리베이터의 용량과 운행 속도가 증가함에 따라 필연적으로 소음 및 진동 문제가 발생하게 된다. 특히 아파트의 경우 침실, 공부방 등 고도의 정숙을 요하는 생활 공간이 많고, 내부 공간의 활용도를 높이기 위하여 이들 방들이 엘리베이터 기계실 또는 운행 통로와 직접 접하여 있는 경우도 있어 이 경우 소음, 진동 문제는 아주 심각한 문제로 대두된다. 본 연구소가 측정한 방에 의하면 S신도시 L아파트의 경우 아파트 최상층 방에서 실내 소음도가 46dB(A), 벽의 진동가속도가 3.4mm/s$^{2}$(RMS)으로 나타났다. 진동의 경우 생활에 직접적인 악영향을 미칠 수준은 아니지만 소음의 경우 ASHRAE 권장 주택소음 기준치가 35dB(A) 이하임ㅇㄹ 감안하면 주거에 곤란한 수준이다. 수년전, 고층 아파트가 보급될 초기에는 아파트에 엘리베이터가 설치되어있다는 그 자체만으로 충분한 장점이 되어 다소음 소음, 진동문제는 큰 불만거리가 되지 않았지만 엘리베이터가 보편화된 지금에는 엘리베이터의 편리성만으로는 점점더 크게 요구되는 정숙성이 보상되지 않는다. 따라서 전반적인 아파트의 소음, 진동 문제에 큰 비중을 차지하는 엘리베이터에 의한 소음, 진동에 관하여 체계적인 연구가 필요하다. 이에 본고에서는 엘리베이터에 의한 아파트의 소음 및 진동에 관하여 그 현황, 원인 그리고 대책에 관한여 논하고자 한다.감 방법을 연구하였고, T.Sakai는 5자유도 모델을 이용하여 엔진 공회전시 발생하는 치타음에 대해 이론과 실험을 통해 해석하고, 엔진 회전수 변동, 클러치 특성, 변속기의 드래그(drag) 토크의 영향과 치타음 저감을 위한 개선된 클러치 특성을 제시하였다. 이 외에도 Thomas C.T.와 E.P.Petkus는 특정 차량에 대한 동력전달계의 비틀림 진동 현상에 대해 연구하였다. 이러한 연구들로 볼 때, 자동차 동력전달계에서 발생하는 진동은 이론과 실험을 통해 그 해석이 가능하며 설계에 매우 유용하게 이용되고 있음을 알 수 있다. 따라서, 본 연구는 4 실린더 4 싸이클 1.5 L 엔진을 장착한 경승용차의 실차 주행실험을 통해 가속 페달의 급조작에 따른 차체의 종진동 현상을 측정하고, 엔진-변속기-타이어-차체의 반환정계 4자유도 진동모델로 시뮬레이션을 수행하여 실차 주행실험의 결과치와 비교, 분석한 후 클러치 비틀림 특성을 비롯한 자동차 동력전달계의 각 설계인자들이 차체의 종진동에 어떠한 영향을 미치는가를 해석하고자 한다.be presented.LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.1

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.221-227
• /
• 2004

Nutrient utilization and plasma level of minerals were studied in lactating crossbred cows fed diet supplemented from different source of minerals. Twelve crossbred cows of first to third lactation during their mid stage of lactation were distributed equally under two groups and were fed concentrate mixture, green fodder (para grass) and finger millet straw as per requirement. Cows in group I were fed concentrate mixture supplemented with 1% mineral mixture whereas cows in group II were not supplemented with mineral mixture in the concentrate mixture but were offered additional quantity of green fodder (1 kg DM/cow/day) to compensate for the requirement of minerals. Balance study conducted towards the end of 120 days of feeding experiment indicated that the total dry matter intake in both the groups did not differ significantly. The cows in group II offered additional quantity of green fodder consumed significantly (p<0.05) more of green fodder (5.11 vs. 4.51 kg /animal/day) and the cows in group I consumed significantly (p<0.01) more of finger millet straw (1.71 vs. 0.92 kg/animal/day). The digestibility of major nutrients did not differ between the groups except for ether extract which was significantly (p<0.05) lower in cows fed additional green fodder. The total daily intake of P, Cu, Fe and Co did not differ significantly in both the groups whereas significantly higher intakes of Ca, Mg, Zn and Mn were observed in cows supplemented with inorganic source of minerals. However, supplementation through both the sources could meet the mineral requirement in group I and group II. The gut absorption (%) of all the minerals was comparable between the groups except for Mg which was significantly (p<0.05) higher in cows supplemented mineral mixture. The net retention of all the minerals was significantly more in the group supplemented with inorganic source of minerals. Except for P, Mg and Co the retention as percentage of total intake was comparable for all minerals in both the groups. Irrespective of source of mineral supplementation the average monthly blood plasma mineral levels (Ca, P, Mg, Cu, Zn, Fe) were within the normal range and comparable between the groups. Lower level of Cu observed at the start of the experimental feeding in both the groups increased with the advancement of supplemental feeding. The plasma Zn and Fe content in cows of both the groups did not vary. The blood plasma level of some minerals (Ca, P, Mg and Cu) was significantly higher towards the end of experimental feeding as compared to the initial values due to the reduction in milk yield with advancement of lactation or due to supplemental effect of minerals. It could be concluded that supplementation of minerals through inorganic source is better utilized in terms of retention as compared to green fodder (para grass), which is a moderate source of most nutrients.

• Journal of Mushroom
• /
• v.2 no.1
• /
• pp.10-14
• /
• 2004

Effect of solid grain media on the mycelial growth of Pleurotus ostreatus and its biofunctional activities were investigated using seven kinds of grains. Foxtail millet and barley were good for growth of hypha of P. ostreatus. However, growth of the mycelium was very slow in the solid grain media containing wheat, corn and brown rice. Mycelial growth of P. ostreatus according to water content of solid grain media was good at 25% to 30%. Mycelial growth of P. ostreatus according to heating-time and temperature of solid grain media was good for 30 min at $121^{\circ}C$. Anticancer activities against lung cancer cell line of the myceial extracts from P. ostreatus grown on several grain media were strong in the corn, defatted soybean, brown rice, barly and black bean in order. Fibrinolytic activities of the myelial extracts were strong in order defatted soybean, wheat, foxtail millet, barley, brown rice and black bean. The mycelial extracts were showed good antibacterial activities against Pseudomonas aeroginosa and Staphylococcus aureus.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.12
• /
• pp.1712-1720
• /
• 2014

Little is known about the gender differences in energetic requirements of goats in early life. In this study, we determined the energy requirements for maintenance and gain in intact male, castrated male and female Saanen goat kids using the comparative slaughter technique and provide new data on their body composition and energy efficiency. To determine the energy requirements for maintenance, we studied 21 intact males, 15 castrated males and 18 females ($5.0{\pm}0.1kg$ initial body weight (BW) and $23{\pm}5d$ of age) using a split-plot design with the following main factors: three genders (intact males, castrated males, and females) and three dry matter intake levels (ad libitum, 75% and 50% of ad libitum intake). A slaughter group included three kids, one for each nutritional plane, of each gender, and all three animals within a group were slaughtered when the ad libitum kid reached 15 kg in BW. Net energy requirements for gain were obtained for 17 intact males, eight castrated males and 15 females ($5.1{\pm}0.4kg$ BW and $23{\pm}13d$ of age). Animals were fed ad libitum and slaughtered when they reached 5, 10, and 15 kg in BW. A digestion trial was performed with nine kids of each gender to determine digestible energy, metabolizable energy and energy metabolizability of the diet. Our results show no effect of gender on the energy requirements for maintenance and gain, and overall net energy for maintenance was $205.6kJ/kg^{0.75}$ empty body weight gain (EBW) ($170.3kJ/kg^{0.75}$ BW) from 5 to 15 kg BW. Metabolizable energy for maintenance was calculated by iteration, assuming heat production equal to metabolizable energy intake at maintenance, and the result was $294.34kJ/kg^{0.75}$ EBW and $k_m$ of 0.70. As BW increased from 5 to 15 kg for all genders, the net energy required for gain increased from 9.5 to 12.0 kJ/g EBW gain (EWG), and assuming $k_g=0.47$, metabolizable energy for gain ranged from 20.2 to 25.5 kJ/g EWG. Our results indicate that it is not necessary to formulate diets with different energetic content for intact male, castrated male and female Saanen goat kids weighing from 5 to 15 kg.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.6
• /
• pp.807-815
• /
• 2015

The present study aimed at evaluating the intensity of Tifton 85 conditioning using a mower conditioner with free-swinging flail fingers and storage times on dehydration curve, fungi presence, nutritional value and in vitro digestibility of Tifton 85 bermudagrass hay dry matter (DM). The dehydration curve was determined in the whole plant for ten times until the baling. The zero time corresponded to the plant before cutting, which occurred at 11:00 and the other collections were carried out at 8:00, 10:00, 14:00, and 16:00. The experimental design was randomised blocks with two intensities of conditioning (high and low) and ten sampling times, with five replications. The high and low intensities related to adjusting the deflector plate of the free iron fingers (8 and 18 cm). In order to determine gas exchanges during Tifton 85 bermudagrass dehydration, there were evaluations of mature leaves, which were placed in the upper middle third of each branch before the cutting, at every hour for 4 hours. A portable gas analyser was used by an infrared IRGA (6400xt). The analysed variables were photosynthesis (A), stomatal conductance (gs), internal $CO_2$ concentration (Ci), transpiration (T), water use efficiency (WUE), and intrinsic water use efficiency (WUEi). In the second part of this study, the nutritional value of Tifton 85 hay was evaluated, so randomised blocks were designed in a split plot through time, with two treatments placed in the following plots: high and low intensity of cutting and five different time points as subplots: cutting (additional treatment), baling and after 30, 60, and 90 days of storage. Subsequently, fungi that were in green plants as well as hay were determined and samples were collected from the grass at the cutting period, during baling, and after 30, 60, and 90 days of storage. It was observed that Tifton 85 bermudagrass dehydration occurred within 49 hours, so this was considered the best time for drying hay. Gas exchanges were more intense before cutting, although after cutting they decreased until ceasing within 4 hours. The lowest values of acid detergent insoluble nitrogen were obtained with low conditioning intensity after 30 days of storage, 64.8 g/kg DM. The in vitro dry matter of Tifton 85 bermudagrass did not differ among the storage times or the conditioning intensities. There was no fungi present in the samples collected during the storage period up to 90 days after dehydration, with less than 30 colony forming units found on plate counting. The use of mower conditioners in different intensities of injury did not speed up the dehydration time of Tifton 85.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.517-524
• /
• 2011

The effect on sow milk of variable levels of cassava in lactating sow diets was analyzed in an attempt to explain the beneficial effects reported by producers of including cassava as a basal feed. Twenty crossbred lactating sows were randomly assigned to five dietary treatments. The treatments were: i) broken rice (BR) as the basal feed (BR100), ii) 50% of BR replaced with cassava chip meal (CCM) (CM50), iii) 75% of BR replaced with CCM (CM75), iv) CCM as the basal feed (CM100), and v) dried boiled cassava chips (CCB) as the basal feed (CB100). The hydrocyanide (HCN) content of CCB was reduced to be intermediate between HCN in the no cassava (BR100) and the 50% cassava (CB50) diets. Hydrocyanide was 0.54, 3.24, 4.41, 5.43 and 1.77 ppm in the BR100, CM50, CM75, CM100 and CB100 diets, respectively. Increasing cassava did not affect feed intake (p>0.05), but increased HCN intake (p<0.01). Milk composition was analyzed for protein, fat, lactose, solids not fat (SNF) and total solids (TS). Milk quality was analyzed for total microbes, coliform bacteria, thiocyanate ($SCN^-$), lactoperoxidase (LPO), and glutathione peroxidase (GPx) activity. At farrowing, sow milk composition was not affected by experimental diets (p>0.05), but milk $SCN^-$ increased as the intake of HCN increased in sows diets (p<0.01), $r^2$ = 0.96. At mid-lactation (day 14), milk composition was not affected (p>0.05). The milk quality levels of $SCN^-$ were 9.4, 10.3, 10.5, 11.6 and 9.1 ppm for the BR100, CM50, CM75, CM100 and CB100 diets, respectively (p = 0.01). The LPO contents were 16.41, 42.13, 51.42, 53.94 and 22.81 unit/L, respectively (p = 0.03). There was no GPx activity found in sow milk. When BR was replaced with cassava meal, total microbes and coliforms were reduced 78% and 87%, respectively, by the influences of HCN. The reported beneficial effects of cassava chip meal as a basal feed in lactating sow diets is manifested by improved performance of suckling pigs. This is due to beneficial, non-toxic levels of HCN in the diets. Besides passing HCN to suckling pigs in the form of $SCN^-$, sow milk may also benefit suckling pigs with the observed (day 14) increase in lactoperoxidase content and reduction in coliform bacteria.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.10
• /
• pp.1474-1483
• /
• 2013

The objective was to evaluate the use of prediction equations based on the chemical composition of feedstuffs to estimate the values of apparent metabolisable energy corrected for nitrogen balance (AMEn) of corn and soybean meal for broilers. For performance and carcass characteristics, 1,200 one-d-old birds (male and female) were allotted to a completely randomised factorial $2{\times}8$ (two genders and eight experimental diets) with three replicates of each sex with 25 birds. In the metabolism trial, 240 eight-d-old birds were distributed in the same design, but with a split plot in time (age of evaluation) with five, four and three birds per plot, respectively, in stages 8 to 21, 22 to 35, and 36 to 42 d of age. The treatments consisted of the use of six equations systems to predict the AMEn content of feedstuffs, tables of food composition and AMEn values obtained by in vivo assay, totalling eight treatments. Means were compared by Scott-Knott test at 5% probability and a confidence interval of 95% was used to check the fit of the energy values of the diets to the requirements of the birds. As a result of this study, the use of prediction equations resulted in better adjustment to the broiler requirements, resulting in better performance and carcass characteristics compared to the use of tables, however, the use of energy values of feedstuffs obtained by in vivo assay is still the most effective. The best equations were: AMEn = 4,021.8-227.55 Ash (for corn) combined with AMEn = -822.33+69.54 CP-45.26 ADF+90.81 EE (for soybean meal); AMEn = 36.21 CP+85.44 EE+37.26 NFE (nitrogen-free extract) (for corn) combined with AMEn = 37.5 CP+46.39 EE+14.9 NFE (for soybean); and AMEn = 4,164.187+51.006 EE-197.663 Ash-35.689 CF-20.593 NDF (for corn and soybean meal).

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.233-236
• /
• 2001

일반적으로 스피커를 동작시키게 되면, 스피커 보이스 코일에 열이 발생하게 되고, 열에 의한 보이스코일의 저항의 증가가 나타나게 되는데, 기존의 연구는 저음용 스피커(Woofer) 만을 대상으로 스피커의 음향특성 변화들에 관해 수행되었다. 그러나, 현대의 스피커는 A/V시스템분야의 발전에 따라 고음재생의 충실도가 강조되고 있는 경향이므로, 고음용 스피커(Tweeter)에 대한 열 발생의 영향을 조사하였다. 본 연구에서는 고음용 스피커의 입력전력에 따른 특성 변화를 조사하고, 입력전력의 증가로 인한 보이스코일(voice coil)의 저항 증가에 따른 고음용 스피커의 특성변화에 관해 실험하였다. 그리고, 스피커의 진동에 의한 펌프(pump) 역할을 이용하는 냉각용 구멍을 뚫어 스피커의 특성변화를 검토하였다. 실험대상으로는 직경 25mm의 돔(Dome)형 진동판을 가진 고음용 스피커와 이 스피커의 후면 중심부에 구멍을 뚫어 열 방출구가 형성된 3종의 시료를 대상으로 특성변화를 비교$\cdot$측정하였다. 여기에서, 사용된 시료는 국내 Y사의 판매용 고음용 스피커로 제품의 원 상태인, 구멍이 없는 것을 기준시료로 하고, 이와 동일한 제품들의 후면에 각각 직경 5mm, 10mm, 15mm의 구멍을 가공하여 비교시료로 하였다. 기준 및 비교시료의 스피커 특성을, 한국산업규격 KS C 6027의 측정법에 따라, 입력 1W 상태에서 기준시료의 사양을 측정하였고[1], 입력을 0.5W, 1W, 2W, 4W, 8W, 16W로 가하여, 시료별 입력증가에 따른 스피커의 주파수 응답특성, 임피던스(Impedance), 조화 왜(Harmonic Distortion)의 변화율 측정을 통해 스피커의 특성변화 정도를 검토하였다. 향후, 본 연구의 결과는 고음용 스피커의 특성 열화에 대한 예측 및 개선 방안을 제시하는 기본 자료로 활용이 가능할 것으로 사료된다.용하여 현금흐름예측을 할 수 있는 Model을 제시하였다. 특히 건설공사의 현금흐름 예측의 중요한 요소인 Cash-Out에 대하여, 공사비 구성요소인 자재, 노무, 중기, 외주, 경비등 각 Resource의 보할(Weights)을 실 공사원가에 따른 보할의 변화와 Resource들의 Time Lag를 적용 기존 연구자의 Model과 다른 Model을 제시하였다. 또한 기존 연구자들의 Model과 비교하여 편리성, 정확도 및 신뢰성이 높은 Model임도 증명하였다.세대까지도 발현수준이 유지될 것으로 판단된다. 이러한 연구결과는 계통으로 확립된 형질전환 동물에 부여된 새로운 유전형질은 지속적으로 후대로 유전될 수 있음을 제시한다.잖⨀瘀Ā퀇Āゑ잖⨀Ā퀇Ԁ￿™잖⨀䌀Ā퀇ĀꄏĀꀏꄏĀꀏ₱?⨀Ā Ԁ￿䂱?⨀ऀĀ耀Ā삱?⨀؀Ā Ā?⨀ጀĀ耀Ā?돀ꢘ?⨀硩?⨀ႎ?⨀?⨀넆돐쁖잖⨀쁖잖⨀／ࠐ?⨀焆덐瀆倆Āⶇ퍟ⶇ퍟ĀĀĀĀ磀鲕좗?⨀肤?⨀⁅Ⴅ?⨀쀃잖⨀䣙熸ጁ↏?⨀

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.91-91
• /
• 2010

본 논문은 펄스 직류전원 (Pulse DC) 플라즈마 소스와 반응성 가스인 $CF_4$와 불활성 가스인 Ar를 혼합하여 산업에서 널리 사용되는 유기고분자인 Polymethylmethacrylate (PMMA), Polyethylene terephthalate (PET), 그리고 Polycarbonate (PC) 샘플을 건식 식각한 결과에 대한 것이다. 각각의 샘플은 감광제 도포 후에 자외선을 조사하는 포토레지스트 방법으로 마스크를 만들었다. 펄스 직류전원 플라즈마 시스템을 사용하면 다양한 변수를 줄 수 있다는 장점이 있다. 공정 변수는 Pulse DC Voltage는 300 - 500 V, Pulse DC reverse time $0.5{\sim}2.0\;{\mu}s$, Pulse DC Frequency 100~250 kHz 이었다. 변수 각각의 값이 높아질수록 고분자의 식각률이 높아졌다. 특히, PMMA의 식각률이 가장 높았으며 PET, PC 순이었다. 샘플 중 PC의 식각률이 가장 낮은 이유는 고분자 결합 중에 이중결합의 벤젠 고리 모양을 포함하고 있어 분자 결합력이 비교적 높기 때문으로 사료된다. 기계적 펌프만을 사용한 공정 전 압력은 30 mTorr이었다. 쓰로틀 밸브를 완전 개방한 상태에서 식각 공정 중 진공 압력은 $CF_4$ 가스유량이 늘어날수록 증가하였다. 식각률 역시 $CF_4$ 가스유량(총 가스 유량은 10 sccm)이 많을수록 증가함을 보여주었다 (PMMA: 10 sccm $CF_4$에서 330 nm/min, 3.5 sccm $CF_4$/6.5 sccm Ar에서 260 nm/min., PET: 10 sccm $CF_4$에서 260 nm/min, 3.5 sccm $CF_4$/6.5 sccm Ar에서 210 nm., PC: 10 sccm $CF_4$에서 230 nm, 3.5 sccm $CF_4c$/6.5 sccm Ar에서 160 nm). 이는 펄스 직류전원 플라즈마 식각에서 $CF_4$와 Ar의 가스 혼합비를 조절함으로서 고분자 소재의 식각률을 적절히 변화시킬 수 있다는 것을 의미한다. 표면 거칠기는 실험 후 표면단차 측정기와 전자 현미경 등을 이용하여 식각한 샘플의 표면을 측정하여 알 수 있었다. 실험전 기준 샘플 표면 거칠기는 PMMA는 1.53nm, PET는 3.1nm, PC는 1.54nm 이었다. 식각된 샘플들의 표면 거칠기는 PMMA는 3.59~10.59 nm, PET은 5.13~11.32 nm, PC는 1.52~3.14 nm 범위였다. 광학 발광 분석기 (Optical emission spectroscopy)를 이용하여 식각 공정 중 플라즈마 발광특성을 분석한 결과, 탄소 원자 픽 (424.662 nm)과 아르곤 원자 픽 (751.465 nm, 763.510 nm)의 픽의 존재를 확인하였다. 이 때 탄소 픽은 $CF_4$ 가스에서 발생하였을 것으로 추측한다. 본 발표를 통해 펄스 직류전원 $CF_4$/Ar의 고분자 식각 결과에 대해 보고할 것이다.