• Journal of Biomedical Engineering Research
• /
• v.29 no.3
• /
• pp.212-221
• /
• 2008

The total hip replacement (THR) has been used as the most effective way to restore the function of damaged hip joint. However, various factors have caused some side effects after the THR. Unfortunately, the success of the THR have been decided only by the proficiency of surgeons so far. Hence, It is necessary to find the way to minimize the side effect caused by those factors. The purpose of this study was to suggest the definite data, which can be used to design and choose the optimal hip implant. Using finite element analysis (FEA), the biomechanical condition of bone cement was evaluated. Stress patterns were analyzed in three conditions: cement mantle, procimal femur and stem-cement contact surface. Additionally, micro-motion was analyzed in the stem-cement contact surface. The 3-D femur model was reconstructed from 2-D computerized tomography (CT) images. Raw CT images were preprocessed by image processing technique (i.e. edge detection). In this study, automated edge detection system was created by MATLAB coding for effective and rapid image processing. The 3-D femur model was reconstructed based on anatomical parameters. The stem shape was designed using that parameters. The analysis of the finite element models was performed with the variation of parameters. The biomechanical influence of each parameter was analyzed and derived optimal parameters. Moreover, the results of FE A using commercial stem model (Zimmer's V erSys) were similar to the results of stem model that was used in this study. Through the study, the improved designs and optimal factors for clinical application were suggested. We expect that the results can suggest solutions to minimize various side effects.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.3
• /
• pp.159-163
• /
• 2002

This study was analyzed to photosynthetic pigment concentrations and changes of SOD activities on seven species of liana of A. heterophylla, P. scandens, V. thunbergii, P. tricuspidata, C. trilobus, L. japonica and T. kirilowii, and two species of E. arvense and A. princeps of non climbing plants. Concentrations of chlorophyll a and b, total chlorophylls and total carotenoids of P. tricuspidata in 100 ppb ozone site were the most increased. It was the most increased to P. scandens in ratio of chlorophylls and carotenoids, and E. arvense in ratio of chlorophyll a and b. There was difference to ratio of chlorophyll a and b of liana and non liana. At ratio of chlorophyll a and b of 100 ppb ozone site and the control it was more sensitive to chlorophyll a than chlorophyll b, and P. tricuspidata was the most sensitive at comparing with species, and it was more sensitive to liana than non liana. In SOD activities A. princeps was the most increased to 3535.7 unit/g, and P. scandens was the fewest increased to 109.3 unit/g, and A. heterophylla was only decreased to 131.7 unit/g in comparing to 100 ppb ozone sites and the control.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.597-598
• /
• 2005

Recently, the performance of portable electric equipment can often improved by a Li-ion battery assisted by a supercapacitor. A supercapacitor can provide high power density as well as a low resistance in the hybrid system. In this study, we have prepared, as the pluse power souce, a commercially supplied Li-ion battery with a capacity of 700mAh and AC resistivity of $60m\Omega$ at 1kHz and nonaqeous asymmetric hybrid capacitor composed of an activated carbon cathode and MCMB anode, and have examined the electrochemical characteristics of hybrid capacitor and the pulse performances of parallel connected battery/hybrid capacitor source. The nonaqueous asymmetric hybrid capacitor, the stacks of 10 pairs of the cathode, the porous separator and the anode electrode were housed in Al-laminated film cell. The hybrid capacitor, which was charged and discharged at a constant current at $0.25mA/cm^2$ between 3 and 4.3V, has exhibited the capacitance of 100F. And the equivalent series resistance was $32m\Omega$ at 1kHz. By combining a Li-ion battery and a hybrid capacitor, the pulse performance of battery can be improved 23% in run time under a pulse discharge of 7C-rate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.141-141
• /
• 2010

The effect of thermal anneal on the characteristics of structural properties and the enhancement of luminescence and photovoltaic (PV) characteristics of silicon-rich silicon-nitride films were investigated. By using an ultra high vacuum ion beam sputtering deposition, B-doped silicon-rich silicon-nitride (SRSN) thin films, with excess silicon content of 15 at. %, on P-doped (n-type) Si substrate was fabricated, sputtering a highly B doped Si wafer with a BN chip by N plasma. In order to examine the influence of thermal anneal, films were then annealed at different temperature up to $1100^{\circ}C$ under $N_2$ environment. Raman, X-ray diffraction, and X-ray photoemission spectroscopy did not show any reliable evidence of amorphous or crystalline Si clusters allowing us concluding that nearly no Si nano-cluster could be formed through the precipitation of excess Si from SRSN matrix during thermal anneal. Instead, results of Fourier transform infrared and X-ray photoemission spectroscopy clearly indicated that defective, amorphous Si-N matrix of films was changed to be well-ordered thanks to high temperature anneal. The measurement of spectral ellipsometry in UV-visible range was carried out and we found that the optical absorption edge of film was shifted to higher energy as the anneal temperature increased as the results of thermal anneal induced formation of $Si_3N_4$-like matrix. These are consistent with the observation that higher visible photoluminescence, which is likely due to the presence of Si-N bonds, from anneals at higher temperature. Based on these films, PV cells were fabricated by the formation of front/back metal electrodes. For all cells, typical I-V characteristic of p-n diode junction was observed. We also tried to measure PV properties using a solar-simulator and confirmed successful operation of PV devices. Carrier transport mechanism depending on anneal temperature and the implication of PV cells based on SRSN films were also discussed.

• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.504-507
• /
• 2012

Synthesis of RGO (reduced graphene oxide)-CdS composite material was performed through CBD (chemical bath deposition) method in which graphene oxide served as the support and Cadmium Sulfate Hydrate as the starting material. Graphene-based semiconductor photocatalysts have attracted extensive attention due to their usefulness for environmental and energy applications. The band gap (2.4 eV) of CdS corresponds well with the spectrum of sunlight because the crystalline phase, size, morphology, specic surface area and defects, etc., of CdS can affect its photocatalytic activity. The specific surface structure (morphology) of the photocatalyst can be effective for the suppression of recombination between photogenerated electrons and holes. Graphene (GN) has unique properties such as a high value of Young's modulus, large theoretical specific surface area, excellent thermal conductivity, high mobility of charge carriers, and good optical transmittance. These excellent properties make GN an ideal building block in nanocomposites. It can act as an excellent electron-acceptor/transport material. Therefore, the morphology, structural characterization and crystal structure were observed using various analytical tools, such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. From this analysis, it is shown that CdS particles were well dispersed uniformly in the RGO sheet. Furthermore, the photocatalytic property of the resulting RGO-CdS composite is also discussed in relation to environmental applications such as the photocatalytic degradation of pollutants. It was found that the prepared RGO-CdS nanocomposites exhibited enhanced photocatalytic activity as compared with that of CdS nanoparticles. Therefore, better efficiency of photodegradation was found for water purification applications using RGO-CdS composite.

• Biomolecules & Therapeutics
• /
• v.4 no.2
• /
• pp.167-173
• /
• 1996

This study was undertaken to evaluate a behavior-electroencephalogram (EEG) pattern relationship in pilocarpine- and kainic acid-induced convulsions of rats. Also we intended to examine the effect of a noncompetitive N-methyl-D-aspartate (NMDA) receptor antagonist, MK-801, and diazepam on the pilocarpine-induced behavioral and electrical seizures in rats. The electrical activities at frontal and hippocampal areas and behavior activities were measured in freely moving rats. At the beginning of the experiments, the rats displayed an exploratory behavior. This awake and moving phase with a low amplitude, irregular, 4-10 Hz wave was followed by a still phase. Pilocarpine (400 mg/kg, i.p.) and kainic acid (0.5 mg/kg, i.c.v.) induced tonic and clonic seizures. The pilocarpine-induced change in electrical activities exhibited a weak correlation with behavioral convulsion at all stages. The amplitude and duration of the electrical response were not linear with the degree of behavioral score. An application of MK-801 (dizocilpine, 7.5 mg/kg) did not affect the amplitudes of the convulsant-induced electrical activities, though the same dose of this drug caused the deformation of the electrical pattern. There was no effect of MK-801 on the behavioral and electrical activities as expected. Diazepam (1 mg/kg) did not affect the amplitude of the electrical activities induced by pilocarpine but changed the pattern of these activities. Our study shows that there is no linear relationship between degree of behavior and amplitude of electrical activities of convulsants. This may indicate that the NMDA receptor stimulation can be processed by the neocortical or hippocampal network in a different way between behavioral and electrical activities.

• Parasites, Hosts and Diseases
• /
• v.51 no.1
• /
• pp.133-137
• /
• 2013

This study aimed to measure the levels of interferon-gamma (IFN-${\gamma}$), tumor necrosis factor-alpha (TNF-${\alpha}$), interleukin 1 (IL-1), interleukin 6 (IL-6), and nitrite/nitrate ($NO_x$) in serum of dogs experimentally infected with Rangelia vitalii. Twelve female mongrel dogs were divided into 2 groups; group A (uninfected controls) composed by healthy dogs (n=5) and group B consisting of dogs inoculated with R. vitalii (n=7). Animals were monitored by blood smear examinations, which showed intraerythrocytic forms of the parasite on day 5 post-infection (PI). Blood samples were collected through the jugular vein on days 0, 10, and 20 PI to determine the serum levels of IFN-${\gamma}$, TNF-${\alpha}$, IL-1, IL-6, and $NO_x$. Cytokines were assessed by ELISA quantitative sandwich technique, and $NO_x$ was measured by the modified Griess method. Cytokine levels (IFN-${\gamma}$, TNF-${\alpha}$, IL-1, and IL-6) were increased (P<0.01) in serum of infected animals. Serum levels of $NO_x$ were also increased on days 10 PI (P<0.01) and 20 PI (P<0.05) in infected animals. Therefore, the infection with R. vitalii causes an increase in proinflammatory cytokines and nitric oxide content. These alterations may be associated with host immune protection against the parasite.

• Korean journal of food and cookery science
• /
• v.24 no.2
• /
• pp.212-221
• /
• 2008

This study was performed in an effort to create a functional and stable yogurt product containing slander glasswort extract. The extract was added to milk at concentrations of 0.25, 0.5, and 1.0% (w/v), which was then fermented with lactic acid bacteria (Lactobacillus bulgaricus and Streptococcus thermophilus) at $42^{\circ}C$ for 6 hr. During a period of 15 days of storage, the quality characteristics of the yogurt samples were evaluated in terms of acid production (pH and titratable acidity), levels of lactic acid bacteria, color values, viscosity, and sensory characteristics. There were no significant differences in pH during the storage period; however, the control yogurt presented the highest pH value. The 1.0% slander glasswort yogurt had the highest titratable acidity; but again, there were no significant differences among the yogurts. The 1.0% slander glasswort yogurt also had the highest level of lactic acid bacteria, and both the control and slander glasswort-containing yogurts had increasing levels of lactic acid bacteria over the storage period. The 1.0% slander glasswort yogurt had the lowest L-value and highest a- and b-values. And the slander glasswort yogurts presented lower viscosity values than the control. In sensory evaluations, the 0.25% slander glasswort yogurt scored higher than the other groups for color, flavor, viscosity, sweetness, sourness, and overall palatability. The final sensory results indicated that the 0.25% slander glasswort yogurt was superior.

• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.639-642
• /
• 2006

The root extract of Scilla scilloides (which has been used as a traditional folk medicine in Korea) was evaluated with regard to antimicrobial, anti-inflammatory, and anti-oxidative activities. The roots of S. scilloides were minced and extracted with 95% ethanol (root:ethanol=25:75, w/v). The inhibitory effects of S. scilloides root extract on the growth of Staphylococcus aureus ATCC 35556, Salmonella enteritidis ATCC 12021, Escherichia coli O157:H7, and Candida parapsilosis KCCM 35428 were tested. The results indicate that the antimicrobial effects of both 0.1 and 1.0% extract of S. scilloides were greater against the growth of S. aureus ATCC 35556 and C. parapsilosis KCCM 35428 than the growth of S. enteritidis ATCC 12021 and E. coli O157:H7. The anti-inflammatory effects were evaluated by measurement of the inhibition of hyaluronidase activity in vitro. It appears that both 0.1 and 1.0% concentrations of extract have inhibitory effects on hyaluronidase relative to the control. Finally, the anti-oxidative effect of 1.0 and 10% extract solutions were measured according to the thiocyanate method and were compared with 1.0% BHT. The results indicate that the anti-oxidative effect of 10% S. scilloides root extract (anti-oxidative index (AOI); $72.3{\pm}4.2$) is not significantly different from that of 1.0% BHA (AOI; $76.8{\pm}3.5$) (p<0.05). However, it appears that the anti-oxidative effect of S. scilloides root extract is at least three-fold greater than that of BHA when accounting for the amount of dissolved solids in each.

• Korean Journal of Food Science and Technology
• /
• v.38 no.1
• /
• pp.5-9
• /
• 2006

Method for separation and quantification of methylxanthins, catechins, and theaflavins in Korean commercial teas (green, oolong, and black teas) was developed using reversed phase high-performance liquid chromatography (HPLC). After extraction with hot water, tea compounds were separated on Inertsil ODS-3v $(5\;{\mu}m)$ column, eluted with gradient of 7% acetonitrile and 93% of 20 mM phosphate buffer mixture for 7 min. Column effluent was monitored at 270 nm. This technique was effective for analyses of m methylxanthins, catechins, and theaflavins in teas and biological samples. In green and oolong teas, two kinds of methylxanthins and 7 of catechins were identified, whereas 4 theaflavins were only identified in black tea. Among seven catechins in green and oolong teas, EGCG showed highest amount, whereas ECG was highest in black tea. (theaflavins were found only in black teas) In all teas, theobromine content was lower than that of caffeine.