• Geomechanics and Engineering
• /
• v.21 no.2
• /
• pp.201-206
• /
• 2020

A stress-induced brittle failure in deep tunneling generates spalling and slabbing, eventually causing a v-shaped notch formation. An empirical relationship for the depth of the notch to the maximum tangential stress assuming an equivalent circular cross-section was proposed (Martin et al. 1999). While this empirical approach has been well recognized in the industry and used as a design guideline in many projects, its applicability to a non-circular opening is worth revisiting due to the use of equivalent circular profile. Moreover, even though the extent of the notch also contributes to notch failure, it has not been estimated to date. When the estimate of both the depth and the extent of notch are combined, a practical and economically justifiable support design can be achieved. In this study, a new methodology to assess the depth as well as the extent of notch failure is developed. Field data and numerical simulations using the Cohesion Weakening Frictional Strengthening (CWFS) model were collected and correlated with the three most commonly accepted failure criteria (σ₁/σ₃, D_is=σ_max/σ_c, σ_dev/σ_cm). For the numerical analyses, the D-shaped tunnel was used since most civil tunnels are built to this profile. Inferential statistical analysis is applied to predict the failure range with a 95% confidence level. Considering its accuracy and simplicity, the new correlation can be used as an enhanced version of failure assessment.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.241-250
• /
• 1991

The reliability analysis for web frame of tanker is carried out by the probabilistic finite element method combined with the classical reliability method such as MVFOSM and AFOSM which can be used for calculating the probability of failure for the complicated structures in which the limit state equation is implicitly expressed. As random variables external load, elastic modulus, sectional moment of inertia and field stress are chosen and Parkinson's iteration algorithm in AFOSM is used for reliability analysis. By adding only the covariance data of the random variables to the input data set required for conventional finite element method, the present method can easily calculate the probability of failure at every element end as well as the covariances of structural reponses such as displacements at every element end and member forces at every element, even for the complicated ship structure.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.140-146
• /
• 2013

PURPOSE. The aim of this study was to investigate the destructive effects of biofilm formation and/or biocorrosive activity of 6 different oral microorganisms. MATERIALS AND METHODS. Three different heat polymerized acrylic resins (Ivocap Plus, Lucitone 550, QC 20) were used to prepare three different types of samples. Type "A" samples with "V" type notch was used to measure the fracture strength, "B" type to evaluate the surfaces with scanning electron microscopy and "C" type for quantitative biofilm assay. Development and calculation of biofilm covered surfaces on denture base materials were accomplished by SEM and quantitative biofilm assay. According to normality assumptions ANOVA or Kruskal-Wallis was selected for statistical analysis (${\alpha}$=0.05). RESULTS. Significant differences were obtained among the adhesion potential of 6 different microorganisms and there were significant differences among their adhesion onto 3 different denture base materials. Compared to the control groups after contamination with the microorganisms, the three point bending test values of denture base materials decreased significantly (P<.05); microorganisms diffused at least 52% of the denture base surface. The highest median quantitative biofilm value within all the denture base materials was obtained with P. aeruginosa on Lucitone 550. The type of denture base material did not alter the diffusion potential of the microorganisms significantly (P>.05). CONCLUSION. All the tested microorganisms had destructive effect over the structure and composition of the denture base materials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.92-92
• /
• 1999

양자우물 무질서화 기술은 양자우물구조의 성장후 그 구조의 밴드갭을 국부적으로 변화시킬 수 있는 기술적 특성으로 인해 기존의 광기능 소자 제작을 위한 결정재성장방법을 대체 혹은 보완할 수 있는 장점이 있기 때문에 최근 활발히 연구되고 있다. 여러 가지 양자우물 무질서화공정중 유전체 박막을 사용하는 impurity free vacancy disordering (IFVD) 공정은 불순물이 개입하지 않는 공정으로 공정후 양질의 반도체 표면을 유지할 수 있는 장점이 있으며 고아소자 제작시 광손실의 증가를 초래하지 않는다. 이 공정은 vacancy의 source로 작용하는 유전체박막의 특성에 크게 의존하며 GaAs/AlGaAs 계열의 양자우물에서는 많은 연구가 진행되었으나, 광통신용 광소자의 제작에 사용되는 InGaAs/InGaAsP 계열의 양자우물에 대한 연구는 충분하지 않다. 그림 1은 IFVD를 위해 본 연구에서 사용된 CBE로 성장한 InGaAs/InGaAsP SQW 구조이다. 성장된 구조는 상온에서의 QW peak, λpl=1550nm 이었다. IFVD를 위한 유전체 덮개층으로는 PECVD로 성장 조정하여 박막성장시의 조건을 변화시킴으로써 유전체 덮개층 박막의 특성을 변화시켰다. 그림 2는 질소 분위기의 furnace에서 75$0^{\circ}C$로 8분간 IFVD를 수행한후 측정한 무질서화된 양자우물의 상온 PL spectrum을 보여준다. 그림에서 보는바와 같이 동일한 SiNx 덮개층을 사용하는 경우에도 적어도 24meV의 bandgap차를 갖는 양자우물을 영역을 동일한 기판상에 제작할 수 있음을 알 수 있다. 일반적으로 IFVD 방법으로 국부적으로 양자우물을 무질서화 하기 위해서는 SiNx/SiO2와 같은 강이한 박막을 사용하였지만 이 방법을 사용하는 경우 상이한 박막을 사용하는 데서 야기되는 제반 문제를 해결할 수 있을 것으로 판단된다. 따라서 이 기술은 기존의 광소자 제작을 위한 IFVD 방법의 문제점을 해결할 뿐만 아니라 결정 재성장 없이 도일한 기판상에 국부적으로 상이한 bandgap 영역을 만들 수 있기 때문에 광소자 제작에 적극 이용될 수 있다.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.2
• /
• pp.99-105
• /
• 2000

This study compared the permeability of $[^3H]taurine,\;[^3H]phenylalanine,\;and\;[^3H]oxytocin$ through the blood-brain barrier (BBB) in mice and rats with common carotid artery perfusion (CCAP) method that modified internal carotid artery perfusion (ICAP) method. External carotid artery (ECA) was cannulated with coagulating pterygopalatine artery (PPA) in ICAP method, while CCA was cannulated without coagulating PPA in CCAP method. Also, for evaluation of BBB permeability of drugs in mice and rats, we used intravenous injection technique. The results of CCAP method in mice at a perfusion flow-rate of 2 ml/min, the brian volume of distribution $(V_D)$ of $[^{14}C]sucrose,\;[^3H]taurine,\;[^3H]phenylalanine,\;and\;[^3H]oxytocin$ were similar to the result of ICAP method in rats at perfusion flow rate of 4 ml/min. The area under the plasma concentration-time curve and brain uptake of $[^3H]taurine$ by intravenous injection technique, were $65.5{\pm}9.7%ID^*min/ml\;and\;0.515{\pm}0.093%ID/g$, respectively, in mice, and the corresponding values were $8.00{\pm}0.03%ID^*min/ml\;and\;0.052{\pm}0.003%ID/g$ in rats. But the BBB permeability surface-area product of $[^3H]taurine$ was similar between mice and rats. In conclusion, the CCAP method in mice was simple, fast and comparable to ICAP method in rats for drug permeability through the BBB.

• Journal of Embryo Transfer
• /
• v.9 no.1
• /
• pp.23-29
• /
• 1994

The long term goal of this research is to develop an efficient procedure for large scale production of genetically identical or cloned animals. To improve nuclear transpalntation efficiency in the rabbit, this study evaluated the age of nuclear recipient oocytes on the different steps of nuclear transplantation. The ovulated oocytes in different ages were collected from the superovulated does by flushing oviducts with Dulbecco's phosphate buffered saline(D-PBS) supplemented with 10% fetal calf serum(FCS) from 13 to 15, 17 to 20 and 23 to 26 hours after hCG injection. The denuded oocytes were used as nuclear recipient cytoplasm following enucleation by micromanipulation. The blastomeres separated from the 8-cell embryos were used as nuclear donor. The enucleated oocytes receiving a blastomere in the perivitteline space were fused in the 0.28 M mannitol solution at 1.5 kV/cm, 60 sec for three times. The fused oocytes were co-cultured with the monolayered rabbit oviductal epithelial cells in TGM-199 solution with 10% FCS for 72 hours at 37$^{\circ}C$ in a 5% $CO_2$ incubator. The cultured nuclear transplant embryos and in vivo developed embryos collected at 72 hours after hCG injection were stained with Hoechst 33342 dye. Their cell numbers were counted under a fluorescent microscope. The results obtained were summarized as follows ; 1. The aged oocytes(20 hrs. post hCG) showed significantly(P<0.05) higher fusionrates(70 ~ 90%) than the recently ovulated oocytes(30.8%) 2. The aged oocytes which were electrically activated and fused at 20 hours developed to blastocyst at significantly(P<0.05) high rate, while none of the recently ovulated oocytes developed to blastocyst. 3. Even though the aged oocytes at 23~26 hours showed higher fusion rate(85.7%), not only they were inadequate to manipulate but also their developmental potential to blastocyst was highly impaired. 4. The developmental potential in vitro of nuclear transplant embryos was significantly retarded than in vivo deveolped embryos.

• The Korean Journal of Physiology and Pharmacology
• /
• v.24 no.5
• /
• pp.433-440
• /
• 2020

The substantia gelatinosa (SG) of the trigeminal subnucleus caudalis (Vc) is the first relay site for the orofacial nociceptive inputs via the thin myelinated Aδ and unmyelinated C primary afferent fibers. Borneol, one of the valuable time-honored herbal ingredients in traditional Chinese medicine, is a popular treatment for anxiety, anesthesia, and antinociception. However, to date, little is known as to how borneol acts on the SG neurons of the Vc. To close this gap, the whole-cell patch-clamp technique was applied to elucidate the antinociceptive mechanism responding for the actions of borneol on the SG neurons of the Vc in mice. In the voltage-clamp mode, holding at -60 mV, the borneol-induced non-desensitizing inward currents were not affected by tetrodotoxin, a voltage-gated Na⁺ channel blocker, 6-cyano-7-nitro-quinoxaline-2,3-dione, a non-N-methyl-ᴅ-aspartate (NMDA) glutamate receptor antagonist and DL-2-amino-5-phosphonopentanoic acid, an NMDA receptor antagonist. However, borneol-induced inward currents were partially decreased in the presence of picrotoxin, a γ-aminobutyric acid (GABA)_A receptor antagonist, or strychnine, a glycine receptor antagonist, and was almost suppressed in the presence of picrotoxin and strychnine. Though borneol did not show any effect on the glycine-induced inward currents, borneol enhanced GABA-mediated responses. Beside, borneol enhanced the GABA-induced hyperpolarization under the current-clamp mode. Altogether, we suggest that borneol contributes in part toward mediating the inhibitory GABA and glycine transmission on the SG neurons of the Vc and may serve as an herbal therapeutic for orofacial pain ailments.

• Journal of Applied Biological Chemistry
• /
• v.57 no.2
• /
• pp.113-122
• /
• 2014

A5E is complex of several medicinal herb ethanol extracts. The aim of this study is investigating the anticancer effect for non-small cell lung cancer. The antitumor effects of A5E on NCI-H460 were examined by regulation of cell proliferation, apoptosis, cell cycle arrest, mitochondrial membrane potential (${\Delta}{\Psi}_m$), and apoptosis-related protein. Cell proliferation was measured by MTS assay. Apoptosis induced by A5E was confirmed by Annexin V-fluorescein isothiocyanate (FITC)/Propidium Iodide (PI) staining, and cell cycle arrest was measured by PI staining. NF-${\kappa}B$ translocation was detected by immunofluorescence and MMP (${\Delta}{\Psi}_m$) was measured by JC-1 staining. The expression of extrinsic pathway molecules such as FasL and FADD were elevated, and procaspase-8 was processed by A5E. In addition, intrinsic pathway related molecules were altered. The Bcl-2 and Bcl-xl levels decreased, Bax increased, and cytochrome C was released. In addition, the mitochondrial membrane potential collapsed, and caspase-3 and poly-(ADP-ribose) polymerase were processed by A5E. Moreover, A5E affected the cellular survival pathway involving phosphatidylinositol 3-kinase (PI3K)/Akt and NF-${\kappa}B$. PI3K and Akt were downregulated, also NF-${\kappa}B$ expression was decreased, and nuclear translocalization was inhibited by A5E. These results suggested that A5E delays proliferation, inhibit cell cycle progression and induce apoptosis in human lung cancer cell. We conclude that A5E is a potential anticancer agent for human lung carcinoma.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.16-18
• /
• 2002

We attempted to fabricate a dendrimer Langmuir-Blodgett(LB) films containing 48 pyridinepropanol functional end group. As the pyridinepropanol functional group could form a complex structure with metal ions. In this study the samples for electrical measurement were fabricated to two types metal complexes with $Pt^{4+}$ and $Fe^{2+}$ ions by LB method. And we have investigated the surface activity at the air-water interface as well as the electrical properties for the monolayers of pure G4-48PyP dendrimer and its complex with metal ions($Pt^{4+}$ and $Fe^{2+}$ ions). In the surface pressure-area($\pi-A$) isotherms of the dendrimers, the stable condensed films formed at the air-water interface and the metal ions effect showed the difference on molecular behavior. We have studied the electrical properties of the ultra thin dendrimer LB films investigated by the current-voltage(I-V) characteristics of metal/dendrimer LB films/metal(MIM) structure. In conclusion, it is demonstrated that the metal ion around G4-48PyP dendrimer can contribute to make formation of network structure among dendrimers and it result from the change of electrical properties.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.817-821
• /
• 2011

We have proposed an optical thin film and micro lens to improve the luminance of organic light emitting device. The first method, optical thin film was calculated refractive index of dielectric layer material that was modulated refractive index of organic material, ITO (indium tin oxide)and glass. The second method, microlens was applied with lenses on the organic device. Optical thin films were designed with Macleod Simulator and Micro Lenses were calculated by FDTD (finite-difference time-domain) solution. The structure of thin film was designed in organic material/ITO/dielectric layer/glass. The lenses size, height and distance were 5 ${\mu}m$, 1 ${\mu}m$, 1 ${\mu}m$, respectively. The material of micro lenses used silicon dioxide. Result, The highest luminance of OLED which applied with microlens was 11,185 $cd/m^2$, when approval voltage was 14.5 V, applied thin film was 5,857 $cd/m^2$. The device efficiency applying microlens increased 3 times than the device which does not apply microlens.