• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.18 no.2
• /
• pp.81-89
• /
• 1982

In order to analyze the formation mechanism for the fishing ground of the Gang-dal-i, the relationship between the fish grounds of the Gang-dal-i and the oceanographic structure of the East China Sea and the Yellow Sea is investigated by using the data of the catches of stow net fishery (Fisheries Research and Development Agency, 1970-1979) and the oceanographic observation data (Japan Meteorological Agency). The main fishing grounds of the Gang-dal-i concentrated in the adjacent seas of Daeheugsan island and Sokotra Rock. In these areas, the fishing conditions are generally stable, because about 70% of the total catch of the Gang-dal-i for the ten years is occupied, CPUE also is relatively great, and the coefficients of variation of the catches are relatively small as 0.9 to 1.4. The main fishing periods are roughly from February to March and June to July, and the years of good catches are from 1974 to 1976. In general, the main fishing grounds are formed in the marginal areas of the Yellow Sea Bottom Cold Water. They are the frontal areas in which the Yellow Sea Bottom Cold Water is intermixed with the Yellow Sea Warm Current. The range of the temperature and the salinity in these regions are from 10 to 13$^{\circ}C$ and 32.5 to 34.4$\textperthousand$, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.397-397
• /
• 2013

The electrical, electronic, optical properties and the local structure of Nickel Oxide (NiO) thin film have been investigated by X-ray photoelectron spectroscopy (XPS), Reflection Electron Energy Loss Spectroscopy (REELS), UV-spectrometer,Hall Effect measurement and X-ray absorption spectroscopy (XAS). The XPS results show that the Ni 2p spectra for all films consist of $Ni2p_{3/2}$ at around 854.5 eV which indicate the presence of Ni-O bond from NiO phase and for the annealed film at temperature above $200^{\circ}C$ shows the coexist Ni oxide and Ni metal phase. The REELS spectra showed that the band gaps of the NiO thin films were abruptly decreased with increasing temperature. The values of the band gaps are consistent with the optical band gaps estimated by UV-Spectrometer. The optical transmittance spectra shows that the transparency of NiO thin films in the visible light region was deteriorated with higher temperature due to existence of $Ni^0$. Hall Effect measurement suggest that the NiO thin films prepared at relatively low temperatures (RT and $100^{\circ}C$) are suitable for fabricating p-type semiconductor which showed that the best properties was achieved at $100^{\circ}C$, such as a low resistivity of $7.49{\Omega}.cm$. It can be concluded that the annealing process plays a crucial role in converting from p type to n type semiconductor which leads to reducing electrical resistivity of NiO thin films. Furthermore, the extended X-ray absorption fine structure (EXAFS) spectrum at the Ni K-edge was used to address the local structure of NiO thin films. It was found that the thermal treatments increase the order in the vicinity of Ni atom and lead the NiO thin films to bunsenite crystal structure. Moreover, EXAFS spectra show in increasing of coordination number for the first Ni-O shell and the bond distance of Ni-O with the increase of substrate temperature.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.3
• /
• pp.191-197
• /
• 2008

The purpose of the present study was to examine the pharmacokinetics and lymphatic delivery of the oligopeptide, a model peptide of X antigen epitope peptides, after the intramuscular administration of the peptide-bearing liposomes in rats. $^{14}C$-labelled peptide was used as a tracer to analyze the peptide levels in plasma, bile, urine, tissue homogenates, and lymph nodes (superior cervical nodes, brachial nodes and superior mesenteric nodes). Model peptide rapidly disappeared from the plasma by 30 min (${\alpha}$ phase) after i.v. administration, which was followed by the late disappearance. The apparent plasma half-lives ($t_{1/2({\alpha}),app}$) of the peptide at the ${\alpha}$ phase when administered at a dose of 0.2-1.0 mg/kg were about 5 min. The maximum plasma concentration ($C_{max}$) was $1.52\;{\mu}g/mL$, after the i.m. administration of the peptide at a dose of 1.0 mg/kg. The bioavailability, which was calculated from the time zero to last quantitative time, of the i.m. administered peptide was over 60%. Of the various tissues tested, the peptide was mainly distributed in the kidney after the i.m. administration. The peptide levels in the kidney 3 hr after the i.m. administration were higher than those of maximum plasma concentration ($C_{max}$). The cumulative amounts of the peptide found in the urine 72 hr after the administration of 1.0 mg/kg were 2-folder higher than those in the bile, suggesting that the peptide is mostly excreted in the urine. Moreover, the concentrations of the peptide in the lymph nodes were as high as that of the plasma and the tissues. In conclusion, the peptide concentration in the lymph nodes was maintained by 24 hr after the i.m. administration of the peptide-bearing liposomes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.1
• /
• pp.16-23
• /
• 1987

The cyprinid loach, Misgurnus mizolepis $G\ddot{u}nther$, a freshwater teleost, is a member of the family Cobitidae and is known to distribute in Korea and China. This fish is considered to be an excellent food fish in Korea. This report is a description of the gross morphology of the embryos and larvae up to the development of juvenile period of life. The eggs were obtained by injecting gonadotropin and fertilized by wet method in the laboratory on July 10 in 1986. The inseminated eggs were rinsed with tap water and incubated at $25^{\circ}C$. Live, freshly laid eggs were separative, demersal, adhesive, light yellow and average 1.1mm in diameter. The hatching took place in about yellow and average 1.1mm in diameter. The hatching took place in about 24 hours after fertilization. The newly hatched larvae were average 2.7 mm in total length possessing yolk sac and 35-36 myotomes. Ten hours after hatching, the prelarvae attained 3.5 mm in total length. The first heart pulse and melanophores at the side of the body were observed at this stage. Yolk sac was completely reserved at four days after hatching. The larvae that was cultured 24 days after hatching, 15.4-16.4 mm in total length, entered the juvenile period of life. All the un rays were already peresent; D. III 6, A. III, 5, P.10, V. 4-5, C.14.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.15-15
• /
• 2011

As you know, boron compounds, borax ($Na_2B_4O_5(OH)_4{\cdot}8H_2O$) etc. were known thousands of years ago. As for natural boron, it has two naturally occurring and stable isotopes, boron 11 ($^{11}B$) and boron 10 ($^{10}B$). The neutron absorption $^{10}B$ is included about 19~20% with 80~81% $^{11}B$. Boron is similar to carbon in its capability to form stable covalently bonded molecular networks. The mass difference results in a wide range of ${\beta}$ values between the $^{11}B$ and $^{10}B$. The $^{10}B$ isotope, stable with 5 neutrons is excellent at capturing thermal neutrons. For example, it is possible to decrease a thermal neutron required for the nuclear reaction of uranium 235 ($^{235}U$). If $^{10}B$ absorbs a neutron ($^1n$), it will change to $^7Li+^1{\alpha}$ (${\alpha}$ ray, like $^4He$) with prompt ${\gamma}$ ray from $^{11}B$ $^{11}B$ (equation 1). $$^{10}B+^1n\;{\rightarrow}\;^{11}B\;{\rightarrow}\; prompt \;{\gamma}\;ray (478 keV), \;^7Li+4{\alpha}\;(4He)\;\;\;\;{\cdots}\; (1)$$ If about 1% boron is added to stainless steel, it is known that a neutron shielding effect will be 3 times the boron free steel. Enriched boron or $^{10}B$ is used in both radiation shielding and in boron neutron capture therapy. Then, $^{10}B$ is used for reactivity control and in emergency shutdown systems in nuclear reactors. Furthermore, boron carbide, $B_4C$, is used as the charge of a nuclear fission reaction control rod material and neutron cover material for nuclear reactors. The $B_4C$ powder of natural B composition is used as a charge of a control material of a boiling water reactor (BWR) which occupies commercial power reactors in nuclear power generation. The $B_4C$ sintered body which adjusted $^{10}B$ concentration is used as a charge of a control material of the fast breeder reactor (FBR) currently developed aiming at establishment of a nuclear fuel cycle. In this study for new boron compound, silicon boride ceramics for capturing thermal neutrons, preparation and characterization of both silicon tetraboride ($SiB_4$) and silicon hexaboride ($SiB_6$) and ceramics produced by sintering were investigated in order to determine the suitability of this material for nuclear power generation. The relative density increased with increasing sintering temperature. With a sintering temperature of 1,923 K, a sintered body having a relative density of more than 99% was obtained. The Vickers hardness increased with increasing sintering temperature. The best result was a Vickers hardness of 28 GPa for the $SiB_6$ sintered at 1,923K for 1 h. The high temperature Vickers hardness of the $SiB_6$ sintered body changed from 28 to 12 GPa in the temperature range of room temperature to 1,273 K. The thermal conductivity of the SiB6 sintered body changed from 9.1 to 2.4 W/mK in the range of room temperature to 1,273 K.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1507-1516
• /
• 2002

Meat and bone meal is a valuable protein and mineral source in diets of production animals and contributes to the protein, energy and mineral component of diets. The aim of the present study was to more accurately characterise the apparent ileal amino acid digestibility of meat and bone meals produced in New Zealand and evaluate routine in vitro assays used in practise to measure meat and bone meal quality. A total of 94 commercial meat and bone meals from 25 New Zealand rendering plants over a two and a half year period were analysed for proximates, gross energy, gross amino acid content (incl. hydroxyproline, hydroxylysine and lanthionine), apparent ileal amino acid digestibility, pepsin nitrogen digestibility, protein solubility and bone content. The mean crude protein content of the 94 meat and bone meal samples was 56.8% with a range of >35% units and a coefficient of variation of 9.8%. The mean crude fat and ash content were 10.0 and 28.4% respectively. These latter components showed a large range (16 and 43%, respectively) with coefficients of variation above 22%. Amino acid digestibility between samples was highly variable with lysine and sulphur amino acids digestibility ranging between 45.8-89.0 and 38.2-85.5%, respectively. Pearson correlation coefficients are presented between crude protein content and individual gross amino acids, crude protein content and individual digestible amino acid content, and pepsin N digestibility and individual digestible amino acid content. There was a significant relationship between the digestible amino acid nitrogen content and the crude protein content while pepsin nitrogen digestibility was not correlated to ileal amino acid nitrogen digestibility (r=-0.06). Meat meals with a high protein content had relatively low hydroxyproline and hydroxylysine levels something that was attributed to the levels of collagen from bone. The data indicated that lanthionine (formed upon heat treatment of cysteine with a hydroprotein) is not a good indicator of the heat treatment employed to meat and bone meals. Step-wise multiple regression equations to predict the apparent digestible content of amino acids from rapid in vitro assays are presented. The most selected variables included ash and crude fat content. In general the equations derived for the essential amino acids had a higher degrees of fit (R2) compared to the non-essential amino acids. The R2 for the essential amino acids ranged from 0.43 for histidine and 0.68 for leucine. These equations provide a means of more rapidly estimating the apparent ileal digestible amino acid content (protein quality) of meat and bone meal using standard analyses.

• Korean Journal of Ichthyology
• /
• v.2 no.2
• /
• pp.159-168
• /
• 1990

Parental fish of R. uyekii(Mori) were colleted from the Nakdong River, Korea. Artificial insemination was carried out 4 times during June using the same pair (a female 52.70 mm TL and a male 56.80 mm TL). Unfertilized eggs are nearly spindly, opaque yellow in colour, measuring about 3.20-3.50 mm in length, about 1.50-1.80 mm in breadth. Hatching began about 50 hours after insemination at water temperature of $16.5{\sim}18.5^{\circ}C$. The newly hatched larvae are 4.10-4.50 mm in total length(TL), with 29-30 myomeres. Nine days after hatching, the larvae averaged 8.40 mm in total length and caudal notochord flexed at $45^{\circ}$. Eighteen days after hatching, total length reached 8.90 mm. The part of the fin-fold of the future dorsal and anal fins became high. Twenty-eight days after hatching, total length was 9.35 mm. The caudal fin-rays began to fork into two branches. The increased number of melanophores appeared newly on the head dorsal and anal fin-rays. The larvae reached the juvenile stage at 50-60 days after hatching and attained 14.50-16.20 mm in total length, and all fin-rays was formed.

• Nutrition Research and Practice
• /
• v.12 no.1
• /
• pp.61-68
• /
• 2018

BACKGROUND/OBJECTIVES: This study aimed to test the association between APOA5 3'-UTR variants (rs662799) and cardiometabolic traits in Koreans. SUBJECTS/METHODS: For this study, epidemiological data, Apolipoprotein A5 (APOA5) genotype information, and lymphoblastoid cell line (LCL) biospecimens from a subset of the Ansung-Ansan cohort within the Korean Genome and Epidemiology study (KoGES-ASAS; n = 7,704) as well as epidemiological data along with genomic DNA biospecimens of participants from a subset of the Korea National Health and Nutrition Examination Survey (KNHANES 2011-12; n = 2,235) were obtained. APOA5 mRNA expression was also measured. RESULTS: APOA5 rs662799 genotype distributions in both the KoGES-ASAS and KNHANES groups were 50.6% for TT, 41.3% for TC, and 8.1% for CC, which are similar to those in previous reports. In both groups, minor C allele carriers, particularly subjects with CC homozygosity, had lower high-density lipoprotein (HDL) cholesterol and higher triglyceride levels than TT homozygotes. Linear regression analysis showed that the minor C allele significantly contributed to reduction of circulating HDL cholesterol levels [${\beta}=-2.048$, P < 0.001; ${\beta}=-2.199$, P < 0.001] as well as elevation of circulating triglyceride levels [${\beta}=0.053$, P < 0.001; ${\beta}=0.066$, P < 0.001] in both the KoGES-ASAS and KNHANES groups. In addition, higher expression levels of APOA5 in LCLs of 64 healthy individuals were negatively associated with body mass index (r = -0.277, P = 0.027) and circulating triglyceride level (r = -0.340, P = 0.006) but not significantly correlated with circulating HDL cholesterol level. On the other hand, we observed no significant difference in the mRNA level of APOA5 according to APOA5 rs662799 polymorphisms. CONCLUSIONS: The C allele of APOA5 rs662799 was found to be significantly associated with cardiometabolic traits in a large Korean population from the KoGES-ASAS and KNHANES. The effect of this genotype may be associated with post-transcriptional regulation, which deserves further experimental confirmation.

• The Korean Journal of Physiology and Pharmacology
• /
• v.20 no.1
• /
• pp.35-39
• /
• 2016

To conduct a kinetic study of paraquat (PQ), we investigated 9 patients with acute PQ intoxication. All of them ingested more than 20 ml of undiluted PQ herbicide to commit suicide and arrived at our hospital early, not later than 7 h after PQ ingestion. The urine dithionite test for PQ in all of the nine patients was strongly positive at emergency room. Blood samples were obtained every 30 min for the first 2~3 h and then every 1 or 2 h, as long as the clinical progression was stable among the patients for 30 h after PQ ingestion. The area under the plasma concentration-time curve ($AUC_{inf}$), which was extrapolated to infinity, was calculated using the trapezoidal rule. Toxicokinetic parameters, such as the terminal elimination half-life, apparent oral clearance, and apparent volume of distribution ($V_d/F$) were calculated. The maximum PQ concentration ($C_{max}$) and the time to reach maximum PQ concentration ($T_{max}$) were also obtained. Plasma PQ concentrations in nine patients were well described by a bi-exponential curve with a mean terminal elimination half-life of $13.1{\pm}6.8h$. $C_{max}$ and $AUC_{inf}$ were $20.8{\pm}25.7mg/l$ and $172.5{\pm}160.3h{\cdot}mg/l$, respectively. Apparent volume of distribution and apparent oral clearance were $50.9{\pm}61.3l/kg$ and $173.4{\pm}111.2l/h$, respectively. There were a significant correlation (r=0.84; p<0.05) between the PQ amount ingested and $C_{max}$. $AUC_{inf}$ also showed a significant correlation (r=0.83; p<0.05) with the PQ amount ingested. These correlations provide evidence that PQ has dose-linear toxicokinetic characteristics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.186-186
• /
• 2000

After LeComber et al. reported the first amorphous hydrogenated silicon (a-Si: H) TFT, many laboratories started the development of an active matrix LCDs using a-Si:H TFTs formed on glass substrate. With increasing the display area and pixel density of TFT-LCD, however, high mobility TFTs are required for pixel driver of TF-LCD in order to shorten the charging time of the pixel electrodes. The most important of these drawbacks is a-Si's electron mobiliy, which is the speed at which electrons can move through each transistor. The problem of low carier mobility for the a-Si:H TFTs can be overcome by introducing polycrystalline silicon (poly-Si) thin film instead of a-Si:H as a semiconductor layer of TFTs. Therefore, poly-Si has gained increasing interest and has been investigated by many researchers. Recnetly, fabrication of such poly-Si TFT-LCD panels with VGA pixel size and monolithic drivers has been reported, . Especially, fabricating poly-Si TFTs at a temperature mach lower than the strain point of glass is needed in order to have high mobility TFTs on large-size glass substrate, and the monolithic drivers will reduce the cost of TFT-LCDs. The conventional methods to fabricate poly-Si films are low pressure chemical vapor deposition (LPCVD0 as well as solid phase crystallization (SPC), pulsed rapid thermal annealing(PRTA), and eximer laser annealing (ELA). However, these methods have some disadvantages such as high deposition temperature over $600^{\circ}C$, small grain size (<50nm), poor crystallinity, and high grain boundary states. Therefore the low temperature and large area processes using a cheap glass substrate are impossible because of high temperature process. In this study, therefore, we have deposited poly-Si thin films on si(100) and glass substrates at growth temperature of below 40$0^{\circ}C$ using newly developed high rate magnetron sputtering method. To improve the sputtering yield and the growth rate, a high power (10~30 W/cm2) sputtering source with unbalanced magnetron and Si ion extraction grid was designed and constructed based on the results of computer simulation. The maximum deposition rate could be reached to be 0.35$\mu$m/min due to a high ion bombardment. This is 5 times higher than that of conventional sputtering method, and the sputtering yield was also increased up to 80%. The best film was obtained on Si(100) using Si ion extraction grid under 9.0$\times$10-3Torr of working pressure and 11 W/cm2 of the target power density. The electron mobility of the poly-si film grown on Si(100) at 40$0^{\circ}C$ with ion extraction grid shows 96 cm2/V sec. During sputtering, moreover, the characteristics of si source were also analyzed with in situ Langmuir probe method and optical emission spectroscopy.