• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2425-2433
• /
• 2018

This study investigates a new organic based material and its dielectric and mechanical properties. It is a comprehensive nanocomposite comprising a combination of various types of nanofillers with hydrophobic silica nanoparticles (AEROSIL R 974) as a matrix modifier and a polyamide nano nonwoven textile, Ultramid-Polyamide 6, pulped in the electrostatic field as a dielectric barrier. The polymer matrix is an epoxy network based on diglycidyl ether of bisphenol A (DGEBA) and cycloaliphatic diamine (Laromine C260). The designed nanocomposite material is an alternative to the conventional three-component composites containing fiberglass and mica with properties that exceed current electroinsulating systems (volume resistivity on the order of $10^{16}{\Omega}{\cdot}m$, dissipation factor tan ${\delta}=4.7{\cdot}10^{-3}$, dielectric strength 39 kV/mm).

• Journal of Photoscience
• /
• v.7 no.2
• /
• pp.73-78
• /
• 2000

To analyze molecular traits determining pigmentation between Pharbitis nill violet and white, Amplified Fragment Length Polymorphism(AFLP) and Differential Display Reverse Transcription(DDRT) experiments were carried out with either genomic DNAs or total RNAs isolated from both plants. Results of AFLP experiment in combination of 8 EcoRⅠ primers with 6 MseⅠ primers showed 41 violet-and 60 white-specific DNA bands. In the subsequent experiment, 22 violet-and 22 white-specific DNA fragments were amplified by PCR with DNAs eluted. The sizes of the fragments range from 200 to 600bp. DDRT using total RNA produced 19 violet-and 17 white-specific cDNA fragments, ranging from 200 to 600bp. The fragments obtained by both AFLP and DDRT had been cloned into pGEM T-easy vector, amplified and subjected to the nucleotide sequence analyses. As a result of Blast sequence analysis, most of them sequenced up to date showed no similarity to any Known gene, while few has similarity to known animal or plant genes. An AFLP clone V6, for example, has a strong sequence similarity to the human transcription factor LZIP-alpha mRNA and a DDRT clone W19 to Solanum tuberosum 3-hydroxy-3-methylglutaryl coenzyme A reductase mRNA.

• ALGAE
• /
• v.33 no.1
• /
• pp.37-48
• /
• 2018

Alaria is the second largest genus of the Laminariales, which is distributed far into the northern Pacific and Atlantic oceans. Due to its high morphological plasticity, over 100 specific and sub-specific names have been used in Alaria, this has been tailored down to the present 17 species through morphological revision and molecular phylogenetic analysis. Endemic species of Alaria from Russian Far East have not been thoroughly revised since their original description, and few of them were confirmed using molecular data until recently. We carried out morphological and molecular studies on A. paradisea which is an endemic species distributed on the Kurile Islands, first described by Miyabe and Nagai in 1932 as Pleuropterum paradiseum. The range of morphological variability and its distribution was re-evaluated using the type specimen as well as other specimens. Analyses of partial mitochondrial cytochrome c oxidase subunit 1 and nuclear-encoded internal transcribed spacer sequences showed that A. paradisea nested within the genus Alaria, but differs morphologically from any other Alaria species in having additional sporophylls with a central midrib (${\beta}-sporophylls$). Our results showed that A. paradisea clearly belongs to the genus Alaria based on DNA data, although the key morphological character that was used to include this species to the genus Pleuropterum, ${\beta}-sporophylls$, is stable and distinguishes it from other Alaria species.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.6
• /
• pp.930-936
• /
• 2020

The red seaweed Gracilaria verrucosa has been used for the production of bioethanol. Pretreatment for monosaccharide production was carried out with 12% (w/v) G. verrucosa slurry and 500 mM HNO₃ at 121℃ for 90 min. Enzymatic hydrolysis was performed with a mixture of commercial enzymes (Cellic C-Tec 2 and Celluclast 1.5 L; 16 U/ml) at 50℃ and 150 rpm for 48 h. G. verrucosa was composed of 66.9% carbohydrates. In this study, 61.0 g/L monosaccharides were obtained from 120.0 g dw/l G. verrucosa. The fermentation inhibitors such as hydroxymethylfurfural (HMF), levulinic acid, and formic acid were produced during pretreatment. Activated carbon was used to remove HMF. Wild-type and adaptively evolved Saccharomyces cerevisiae, Candida lusitaniae, and Kluyveromyces marxianus were used for fermentation to evaluate ethanol production.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.3
• /
• pp.171-177
• /
• 1991

A reverse-phase, ion-pair high performance liquid chromatographic (HPLC) method for the simultaneous quantative determination of pyridostigmine and its hydrolytic product, 3-hydroxy-N-methylpyridinium (HMP), is descrihed, The assay of pyridostigmine and HMP was linear in the range of amount from 24 to 60 mg/tablet and from 2.4 to 12.0 mg/tablet, respectively, with coefficient of variation (C.V.) of 0.05-0.12% (n=7) and 0.25-0.52% (n=5), respectively, and applicable conveniently even in the case of the mixture of pyridostigmine and HMP. Meanwhile, the conventional UV method gave inaccurate results for the aged pyridostigmine tablets. In the extraction of pyridostigmine from tablets prior to be assayed by HPLC, methanol was found to be more effective than ethanol or distilled water. Multiple extraction (four times) with methanol resulted in the full recovery of pyridostigmine, whereas ethanol gave 95% recovery even after four times extraction. Based on these results. the present method would be very useful for the accurate determination of pyridostigmine in the aged pyridostigmine tablets.

• Explosives and Blasting
• /
• v.16 no.3
• /
• pp.16-24
• /
• 1998

Methods of Rock fragmentation are used rock of housing repair development at KU-SAN DONG area in seoul Youn-Pyong Ku. So, Theorical analyses of the effect of vibration and frequency on structural damage around old housed also discussed. The results can be summarized as follows: 1. A area(Rock area not more than 15m Ku-San Mention) Some Empirical equations were obtained $V=K\{{\frac{D}{W}}1/3\}^{-n}$ where the values for n and K are estimated to be -1.64 and 94 respectively, this values were obtained only theorical analyses. If we have 125g charge this area is impossible blasting operation, so this area must be worked by SRS(Super Rock Splitter) method. 2. B area(Rock area from 15m to 25m in a boundary line from Ku-San Mention) This area charge is about 125g in a delay time by some empirical equation s. So, this area can be blasting operations by small charge. 3. C area(Rock area from 25m to 35m in a boundary line from Ku-San Mention) This area charge is about 500g in delay time by some empirical equation s. So, this area can be blasting operations by middle charge. 4. D area(Rock area more then 35m in a boundary line from Ku-San Mention) This area charge is about 1000g in a delay time by some empirical equation s. So, this area can be blasting operations by middle charge.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.129-130
• /
• 2008

송전선로에 설취된 애자들은 지속적인 전기적 기계적 스트레스에 노출되어 있기 때문에 여러 환경적 요인으로 인해 애자 표변의 열화가 가속된다. 이와 같은 애자의 표면 열화는 dryband를 형성하게 되고 지속적인 애자 표면상의 dryband와 누설 전류 증가의 상호 작용은 애자의 섬락를 일으키는 원인이 된다.[1][2] 이러한 연구의 결과 고전압용 애자로 유입되는 누설 전류는 애자 열화의 정도를 평가할 수 있는 매우 중요한 parameter임을 알 수 있다. 따라서 고전압용 애자의 누설전류를 분석하고 취득하여 애자의 열화 평가 및 이로 인해 발생할 수 있는 결함 애자의 검출에 대한 연구가 절실히 요구되고 있다, 본 논문에서는 고전압용 애자 중 자기애자의 누설전류 특성을 조사하기 위해 자체 제작한 실험 챔버, AC 내전압기, 전류센서r, 오실로스코프, PC등으로 구성된 실험 시스템을 구축하였고, 데이터 분석을 위한 S/W로서 LabView를 사용하였다. 그에 따른 실험 결과로서 정상 애자련과 결함 애자를 포함한 애자련의 누설전류 데이터를 취득하여 본 연구에서 제시한 알고리즘을 통해 분석함으로써 정상 애자 내의 결함 애자 포함 여부를 판별할 수 있었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.12
• /
• pp.37-43
• /
• 2012

UV-IR diagnostic technology is being used for predictive maintenance of high voltage equipment together with IR-thermography and ultrasonic devices. In this paper, the UV-IR camera design, fabrication, and perform a simple test to be take advantage of the diagnostic equipment. UV-IR camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. In a distance of 5m with the UV-IR it is possible to detect partial discharge with a PD level of 2.5 pC and a RIV(Radio Influence Voltage) level of $3.6dB{\mu}V$.

• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.1051-1066
• /
• 2015

The study aims on the effect of material dependency in elastic- plastic contact models by contact analysis of sphere and flat contact model and wheel rail contact model by considering the material properties without friction. The various materials are selected for the analysis based on Young's modulus and yield strength ratio (E/Y). The simulation software 'ANSYS' is employed for this study. The sphere and flat contact model is considered as a flattening model, the stress and strain for different materials are estimated. The simulation of wheel-rail contact model is also performed and the results are compared with the flattening model. The comparative study has also been extended for finding out the mean contact pressure for different materials the E/Y values between 150 and 660. The results show that the elastic-plastic contact analysis for materials up to E/Y=296.6 is depend on the nature of material properties and also for this material the mean contact pressure to yield strength reaches 2.65.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.5
• /
• pp.742-747
• /
• 2007

In order to investigate the mechanism of adaptation to long-term heat stress, six female buffalo calves of about 7 to 8 months age, were exposed to the cool-comfort environment (THI 65) for 21 days to obtain normal values of blood acid-base. An adaptive response of acid-base regulation was determined to long term (21 days) exposure of buffalo calves to hot-dry (THI 80) and hot-humid (THI 84) conditions. Higher rectal temperature and respiratory rate was recorded under hot-humid exposure compared to hot-dry. Significant reduction in the rectal temperature and respiratory rate on day 21 of hot-dry exposure indicated early thermal adaptation compared to hot-humid. Decreasing rectal temperature and respiratory rate from day 1 to 21 was associated with concurrent decrease in blood pH and pCO2. Increased plasma chloride concentration with low base excess in blood and in extracellular fluid suggested compensatory response to respiratory alkalosis. Reduced fractional excretion of sodium with increased fractional excretion of potassium and urine flow rate indicated renal adaptive response to heat stress.