• Journal of fish pathology
• /
• v.9 no.2
• /
• pp.113-118
• /
• 1996

During a study to document more fully the parasitic ciliates of Korean freshwater fishes, we found numerous small ciliates in the gills and skin of crucian carp, Carassius carassius. Cursory examination indicated that the ciliate were very similar with Chilodonella sp. In this study, we described the morphometrics of this ciliate in detail and compared with other species of Chilodonella in the world. Numerous small ciliates were observed in the body surface, fins and gills of infected fish and excessive mucus production were seen in those fish. Sometimes ulcer was observed in the body of moribund fish. From the scrutinized observation of the parasite, it was identified as Chilodonella hexasticha. The parasite was dorsoventrally flattened body, without a notch in the posterior margin, and it measured 30-$45{\mu}m$ long and 15-$30{\mu}m$ wide. In number of kineties, the right band ciliature was 3-5 and the left band ciliature was 3-5. The right ventral ciliary band shaped arch and was longer than the left, straight band. It had a single oval macronucleus, 8-$15{\mu}m$ in diameter, a single micronucleus, 2-$4{\mu}m$ in diameter. The cytopharynx was reinforced by 10-16 conspicuous nematodesmata, which shaped like a tube and curved at its inner end. Two contractile vacuoles, one anteriorly at right and the second posteriorly at left were observed in wet mounts. This parasite reproduced by a simple division at $22{\pm}1^{\circ}C$.

• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.119-129
• /
• 1986

The purpose of this study was to evaluate the marginal leakage of glass ionomer cement with different cavosurface margins. 192 class V cavities were prepared on freshly extracted non-carious teeth and glass ionomer cement were inserted according to the manufacturer's instructions. Cavity preparations for this investigation were performed in four groups. The experimental specimens were made by packing the glass ionomer cement (Fuji Ionomer Type II G-C Co. Japan) into the prepared 192 cavities of four groups with different modes: Group I. - The 48 cavities with $90^{\circ}$ butt-joint cavosurface preparation and restored with glass ionomer cement. Group II. - The 48 cavities with butt-joint preparation modified by $135^{\circ}$ beveling the cavosurface in the dentin and restored with glass ionomer cement. Group III. - The 48 cavities with butt-joint preparation modified by cutting a chamfer in the dentin and restored with glass ionomer cement. Group IV. - The same 48 cavities as group I, and overfilled with glass ionomer cement beyond the cavosurface angle. And four groups above described divided into three subgroups by means of conditioning the cavity walls: Control group. - Glass ionomer cement filled in the prepared 64 cavities after being cleaned with a stream of tap water. Phosphoric acid treatment group. - Glass ionomer cement filled in the prepared 64 cavities after being conditioned with a 50% phosphoric acid. Citric acid treatment group. - Glass ionomer cement filled in the prepared 64 cavities after being conditioned with a 50% citric acid. All 192 specimens were immersed in the 2.0% basic fuchsin solution and subjected to thermal stress at one-minute intervals ($4{\pm}2^{\circ}C$ to $60{\pm}2^{\circ}C$) for 70 minutes before exposure to the dye. The specimens were sectioned ecclesiologically through the center of the restorations for different periods of immersion time, 24 hours, 7 days, 14 days 30 days. The sections were examined under a stereoscopic microscope. The results were as follows: 1. The degree of marginal leakage in group II and III was greater than that in group I and IV. 2. The degree of marginal leakage in phosphoric acid treatment group was similar with that in control group. 3. The degree of marginal leakage in citric acid treatment group was less than that in control group. 4. In all groups, the degree of marginal leakage in phosphoric acid treatment group was greater than that in citric acid treatment group. 5. There is no statistical difference of the degree of marginal leakage according to the immersion time in the dye solution.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.39-49
• /
• 2017

Standards suitable for local conditions on deciding one-way road are desperately required to solve traffic congestions at the backside roads in the old downtown areas which were not designated as a road by urban planning. Therefore, this study intends to re-establish a standard to decide one-way road which is regarded to be of the greatest effect among traffic system control methods in order to control one-way road system more efficiently. Also, this paper suggests a standard for such decision to improve efficiency of using backside roads and expand designation of one-way road. AHP (analytic hierarchy process) was carried out among the traffic experts to find out the factors to decide one-way road system. Its result reveals that importance of causing accident to walking quantity and traffic was high. 10,000 cases out of all the possible scenarios of accident by combining detailed evaluation items and scales were extracted to draw the outcomes of analyzing the scenarios, which were schematized in a graph. As a result, division by three sections of point of inflection was verified into $1{\leq}$ section A<1.91, 1.9$1{\leq}$ section B<2.08, and $2.08{\leq}$ section C<3. In other words, priority of deciding one-way road should be given to section C, the highest total point, while posterior to section A, where relatively low points are distributed. The standard on deciding one-way road suggested in this paper may be used for designating one-way road and basic data to re-establish the relevant system in the future.

• Korean journal of applied entomology
• /
• v.21 no.2 s.51
• /
• pp.78-86
• /
• 1982

The ecological studies were conducted to identify some bark-beetles on apricot and plum trees in Jeonnam province. Harmful bark-beetles caught from apricot and plum trees were identified as Scolytus seulensis. Xyleborus atratus., X. germanus, X. rubricollis and X. saxeseni. The seoul barkbeetle emerged during the period from early May to late October $1980\~1981$, it happens twice in a year, with the peak July 10 and August 25 in 1950, July 15 and August 20 in 1981. A daily peak emerged for adults was at 11 AM to 1 PM. Distribution of holes on the apricot stems varied; more than 100 holes per meter in Henderson (Apricot) and Y-49057 (Apricot), 12 holes per meter in Derbyroyal (Apricot). Comparatively more holes were found in the European variety, and the cardinal distribution was in the order of east, south, west and north. The longer the longth of the mother-gallery, the greater number of egg-gallery found. Optimum temperature for mating was $27^{\circ}C$. The time for mating was longer during May-June than July-August. The fruit weight of damaged plum tree reached 12.25g around four weeks after flowering; where as that of normal tree increased up to 63.5g at harvest time. The natural enemy of the seoul bark beetle was Eurytoma sp. They were found as mature larva or pupa and they emerged from early May to the middle of June. Adult longevity was about a week.

• Applied Biological Chemistry
• /
• v.32 no.4
• /
• pp.424-434
• /
• 1989

The rationale for the use of fungi in treating waste streams from food processing plants I~as been that of incorporating the dissolved and suspending nutrients into a macroscopic organism which can be filtered out readily. In order for a process using fungi to meet these objectives we examined a strain of fungi, Aspergillus fumigatus, which grew well on a variety of polysaccharide-containing materials and showed both efficient BOD removal and high quality protein recovery. In this experiment the fungal choice was based on the laboratory screening studies where the criteria used was BOD and COD reduction, growth response, mycelial yield, and the ability to compete with the natural flora. In the fermentation system used far the continuous culture of Aspergillus fumigatus the best combination of operating variables, inoculum ratio, temperature, initial pH, fermentation time and agitation rate was 5%(v/v), $35{\sim}40^{circ}C,\;pH\;4.5{\sim}5.0$, 2days and 150rpm, respectively. The fungus reduced BOD and COD to 94.0 and 90.4%, respectively and 3.15g of dry mycelium per liter of alcohol waste was harvested during 48hr of incubation time. The protein efficiency ratios for the control diet and the experimental diet containing the fungal protein were $3.42{\pm}0.15$ and $3.40{\pm}0.43$, respectively.

• Microbiology and Biotechnology Letters
• /
• v.43 no.2
• /
• pp.126-133
• /
• 2015

Ten types of farm-made brewing vinegars were collected and four high acetic acid-producing strains (CV1, CV3, CV5, and CV6) were isolated. Among them strain CV1, exhibiting highly alcohol-resistant and acetic acid-producing properties, was selected and its taxonomic properties were investigated by phenotypic (particularly chemotaxonomic) characterization and phylogenetic inference based on 16S rRNA gene sequence analysis. On SM broth agar, cells of strain CV1 were gram-stainingnegative and formed pale white colonies with smooth to rough surfaces. Strain CV1 produced acetate from ethanol and was resistant to up to 8% (v/v) ethanol in LM broth. Strain CV1 had a G+C content of 61.0 mol%, contained meso-DAP as the cell wall amino acid, and possessed Q-10 as the major ubiquinone. A comparison of 16S rRNA gene sequences showed that strain CV1 was most closely related to Gluconacetobacter saccharivorans (≥99.0% identity). In liquid media, the optimum growth conditions for acetic acid production were 30℃ and pH >3.0 and strain CV1 produced 9.3% and 8.4% acetic acids from 10% and 9% alcohol concentrations, respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.2
• /
• pp.107-115
• /
• 2011

Purpose: To design and fabricate the distributed auto edging machine for the development. Methods: We got the necessary data needed in design by using CAD. Based on the these data, we fabricated the trial product for the development of the distributed auto edging machine. Results: The patternless mode could be operated by receiving the eyesize data from the auto lay-outer with the RS232C transmission system and the pattern mode could be operated by setting the pattern on the left side of the machine. The distributed auto edging machine were composed with combinations of many elements; head, auto arm, pattern clamp and grinding wheels. The head part controlled the grinding of ophthalmic lens by operating the vertical and horizontal motors. The wheels part was comprised of glass mode, plastic mode, V-bevel mode and polish mode. The slide in the auto arm was equipped on the below of the patten and the slide could hold up the pattern which was rotated by fixed shaft. The pattern clamp could move the head part to the up and down or right or left way by the manual operation of optometrists. Conclusions: We could succeed in making the trial product by applying it to the development of the distributed auto edging machine which could be used as the patternless mode and pattern mode, selectively. Therefore, it was confidently expected that this product was very helpful for the optometrists to dispense the ophthalmic lens because of its cost-efficiency and convenience.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.6
• /
• pp.377-383
• /
• 2006

The purpose of the present study was to examine the pharmacokinetic characteristics of arsenic hexaoxide($As_4O_6$), a novel anticancer compound, after i.v. bolus and oral administration in rats. We developed an ICP-Mass based method to analyze arsenic hexaoxide levels in plasma, bile, urine, feces, and tissue and validated the method. Arsenic hexaoxide rapidly disappeared from the plasma by 10 min($\alpha$ phase) after i.v. administration, which was followed by the late disappearance in the $\beta$ phase. The mean plasma half-lives($t_{1/2}$) of arsenic hexaoxide at the a and $\beta$ phase when administered at a dose of 5 mg/kg were 1.57 and 29.8 min, respectively. The maximum plasma concentration($C_{max}$) was 230 ng/mL, after oral administration of arsenic hexaoxide at a dose of 50 mg/kg. The bioavailability, which was calculated from the dose-adjusted ratio, of the oral administered arsenic hexaoxide was 1.61%. Of the various tissues tested, arsenic hexaoxide was mainly distributed in the spleen, lung, liver and kidney after oral administration. Arsenic hexaoxide levels in the spleen or lung at 24 hr after oral administration were higher than those of maximum plasma concentration($C_{max}$). The cumulative amounts of arsenic hexaoxide found in the urine by 48 hr after the administration of 50 mg/kg were 5-fold higher than those in the bile. However, the cumulative amounts in the feces were 10-fold higher compared with those of urine, suggesting that arsenic hexaoxide is mostly excreted in the feces. In conclusion, our observations indicated that arsenic hexaoxide was poorly absorbed from the gastro-intestinal tract to the blood circulation and transferred to tissues such as the spleen and lung at 24 hr after oral administration. Moreover, the majority of arsenic hexaoxide appears to be excreted in the feces by 48 hr after oral administration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.328-335
• /
• 2009

This study was undertaken to investigate the influence of exposure and removal of four different cryoprotectants (CPAs) on the ATP content of cumulus cell-enclosed (COs) and cumulus cell-denuded (DOs) immature porcine oocytes. The in vitro nuclear maturation of the COs, exposed to and removed from the CPAs was also assessed. Both COs and DOs were exposed to 1.5 M concentrations of each CPA (ethylene glycol (EG); propylene glycol (PG); dimethyl-sulfoxide (DMSO); and glycerol (G)) for durations of 5, 15, and 30 minutes at room temperature ($23.5{\pm}1.5^{\circ}C$), and immersed in physiological saline supplemented with 20% (v/v) fetal bovine serum for 5 minutes ($39^{\circ}C$) to remove each CPA. Before, during and after exposure to each CPA, the ATP content of both the COs and the DOs was measured. After removal from each CPA an aliquot of the COs was matured for 44${\pm}$2 h, and their nuclear maturation rates were measured up to the metaphase stage of the second meiotic division (the M-II stage). The maturation rates up to the M-II stage were not significantly different between all the groups that were exposed to each CPA for 5 minutes. For 15 and 30 minute exposures, the maturation rates of the COs exposed to PG, DMSO and EG were almost the same as those of the control groups; however, the rates of G group exposed for 15 and 30 minutes were significantly lower (p<0.05) than the control group. These groups were also found to have a decrease in the ATP content of COs and DOs during and after exposure for the same periods (p<0.05). In addition, although the ATP contents of the COs after exposure to EG for any period were the same as the controls, the ATP content of the DOs exposed to EG for any period were significantly lower (p<0.05) than those of the controls. When the ATP content of the COs and DOs of each CPA were compared, the DOs exposed to PG were found to have a significantly greater level (p<0.05) than DOs exposed to G for any duration. In addition, the ATP content of DOs exposed to PG for 30 min and removal was also higher (p<0.05) than when exposed to DMSO for the same period. These findings indicate that PG may be a useful CPA for the cryopreservation of immature porcine oocytes.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.12
• /
• pp.11-19
• /
• 1999

Fractal image compression algorithm has been studied mostly not in the view of hardware but software. However, a general processor by software can't decode fractal compressed images in real-time. Therefore, it is necessary that we develop a fast dedicated hardware. However, design examples of dedicated hardware are very rare. In this paper, we designed a quadtree fractal-based compressed image decoder which can decode $256{\times}256$ gray-scale images in real-time and used two power-down methods. The first is a hardware-optimized simple post-processing, whose role is to remove block effect appeared after reconstruction, and which is easier to be implemented in hardware than non-2' exponents weighted average method used in conventional software implementation, lessens costs, and accelerates post-processing speed by about 69%. Therefore, we can expect that the method dissipates low power and low energy. The second is to design a power dissipation in the multiplier can be reduced by about 28% with respect to a general array multiplier which is known efficient for low power design in the size of 8 bits or smaller. Using the above two power-down methods, we designed decoder's core block in 3.3V, 1 poly 3 metal, $0.6{\mu}m$ CMOS technology.