• Journal of Hydrogen and New Energy
• /
• v.19 no.1
• /
• pp.18-25
• /
• 2008

The membrane electrode assembly(MEA) was prepared by a nonequilibrium impregnation- reduction (I-R) method. Nafion 117 and covalently cross-linked sulfonated polyetherether with tungsto- phosphoric acid (CL-SPEEK/TPA30) prepared by our laboratory, were chosen as polymer electrolyte membrane(PEM). $Pt(NH_3)_4Cl_2$, $RuCl_3$ and reducing agent $(NaBH_4)$ were used as electrocatalytic materials. Electrochemical activity surface area(ESA) and specific surface area(SSA) of Pt cathodic electrode with Nafion 117 were $22.48m^2/g$ and $23.50m^2/g$ respectively under the condition of 0.8 M $NaBH_4$. But Pt electrode prepared by CL-SPEEK/TPA30 membrane exhibited higher ESA $23.46m^2/g$ than that of Nafion 117. In case of Pt-Ru anodic electrode, the higher concentration of Ru was, the lower potential of oxygen reduction and region of hydrogen desorption was, and Pt-Ru electrode using 10 mM $RuCl_3$ showed best properties of SSA $34.09m^2/g$ with Nafion 117. In water electrolysis performance, the cell voltage of Pt/PEM/Pt-Ru MEA with Nafion 117 showed cell property of 1.75 V at $1A/cm^2$ and $80{\circ}C$. On the same condition, the cell voltage with CL-SPEEK/TPA30 was the best of 1.73 V at $1A/cm^2$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.443-451
• /
• 2010

This paper describes a fully integrated CMOS low-IF mobile-TV RF tuner for Band-III T-DMB/DAB applications. All functional blocks such as low noise amplifier, mixers, variable gain amplifiers, channel filter, phase locked loop, voltage controlled oscillator and PLL loop filter are integrated. The gain of LNA can be controlled from -10 dB to +15 dB with 4-step resolutions. This provides a high signal-to-noise ratio and high linearity performance at a certain power level of RF input because LNA has a small gain variance. For further improving the linearity and noise performance we have proposed the RF VGA exploiting Schmoock's technique and the mixer with current bleeding, which injects directly the charges to the transconductance stage. The chip is fabricated in a 0.18 um mixed signal CMOS process. The measured gain range of the receiver is -25~+88 dB, the overall noise figure(NF) is 4.02~5.13 dB over the whole T-DMB band of 174~240 MHz, and the measured IIP3 is +2.3 dBm at low gain mode. The tuner rejects the image signal over maximum 63.4 dB. The power consumption is 54 mW at 1.8 V supply voltage. The chip area is $3.0{\times}2.5mm^2$.

• Economic and Environmental Geology
• /
• v.11 no.3
• /
• pp.89-98
• /
• 1978

Mineralogy, beneficiation, and processes of titanium ores are reviewed from petrographic viewpoints. The most important titanium minerals are ilmenite ($FeTiO_3$) and rutile ($TiO_2$). Ilmenite will play major role :for raw material, because rutile are rapidly diminishing. Thus, there is a need to develope a successful process for producing high grade Ti02 from ilmenite. Commercial, as well as R and D processes to treat more abundant ilmenite ores fall in three general classess: 1. Iron in ilmenite is partially or completely reduced and separated either physically or chemically. 2. Iron is reduced to ferrous state and chemically leached away from the titanium. 3. Ore is treated to make chlorides either selectively or with subsequent separation and purification of $TiC_4$. Routes and efficiencies of these process technologies are primarily influenced by the particular ore deposit to be mined and secondly by environmental considerations. One deposit parameters which influence ilmenite process technologies are: 1. Complexity of microtextures of ilmenite intergrown with Fe-oxide minerals. 2. Composition of concentrates; ilmenites contain minor amounts of substituted Mg, Mn, and V. These elements plus iron and gangue minerals can cause difficulties to complete reactions, substantial acid consumption, difficulties of removing waste solids, and waste disposal problems. Major contributions to be made by petrologists for process optimization are: characterization and interpretation of compositional and physical changes of raw materials and solids derived from process streams. These informations can play significant role in selecting and improving process steps for titania production.

• The Korean Journal of Mycology
• /
• v.45 no.2
• /
• pp.121-131
• /
• 2017

We evaluated the antioxidant properties of Lentinula edodes upon sawdust bag cultivation with 5 oak substrates: Quercus acutissima, Q. mongolica, Q. serrata, Q. aliena, and Q. variabilis. We found that the optimal extraction conditions were 70% (v/v) methanol shaken at 150 rpm at $25^{\circ}C$ and 150 rpm for 24 h. The methanolic extracts from L. edodes contained high phenolic and flavonoid contents, they also exhibited stronger antioxidant activities. The total phenolic contents and total flavonoid contents of the mushroom extracts ranged from 2.37 to 3.12 milligrams of gallic acid equivalents per gram of dried mushroom (mg GAE/g) and 0.48 to 0.48 milligrams of quercetin equivalents per gram of dried mushroom (mg QE/g), respectively. In addition, the mushroom extracts exhibited 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity (15.8% to 89.4%) at 2 to 10 mg/mL, ferric reducing antioxidant power (0.153 to 0.425) at 5 to 20 mg/mL, and reducing power (0.078 to 0.359) at 5 to 20 mg/mL, respectively. Q. aliena more effectively increased total phenolic contents, total flavonoid contents, and antioxidant activities than the other oak substrates.

• Restorative Dentistry and Endodontics
• /
• v.15 no.1
• /
• pp.107-119
• /
• 1990

The purpose of this study was to evaluate the marginal adaptability of the amalgam restorations in applying the cavity varnish (Copalite$^{(R)}$) and dentin bonding agent (Scotchbond 2$^{(R)}$) under the scanning electron microscope. For this study, eighteen sound extracted human molars were selected. Class I cavities in 12 teeth and class V cavities in 6 teeth were prepared using an air turbine with No. 701 tungsten carbide bur and finished using a low speed handpiece with No. 557 fissure bur. The prepared specimens were then divided into three groups including 4 class I cavities and 2 class V cavities in each group and restored as follows ; Group I. All the prepared cavities were restored with amalgam only (Control). Group II. Two layers of Copalite$^{(R)}$ cavity varnish were applied to the cavities with a gentle stream of air after each application and cavities were restored with amalgam. Group III. The enamel cavity margins were etched with 37% phosphoric acid gel for 60 sec., rinsed for 30 sec. and dried. One layer of visible lightcured Scotchbond Dental Adhesive$^{(R)}$ was applied and immediately cured for 20 seconds with visible light-cure unit and cavities were restored with amalgam. All the specimens were cut at the neck of the teeth and the occlusal halves of specimens were sectioned buccolingually in the longitudinal axis centering the amalgam restorations, using the disk. The cut specimens were ground with sandpapers (400, 600, 800, 1000 grit), and cleaned for 5 minutes in the ultrasonic cleaner (Brason Co. U.S.A.). In the cut surfaces, the amalgam - tooth interfaces were examined under the scanning electron microscope (JSM, 35C type, JEOL). The obtained results were as follows ; 1. The amalgam-tooth interfaces were reduced more significantly in the Copalite$^{(R)}$ and Scotchbond 2$^{(R)}$ application group than in the control group. 2. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed the findings similar to the Copalite$^{(R)}$ application group in the cavity floor, and the marginal adaptability was better in the side wall than in the cavity floor. 3. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed better marginal adaptability in the occlusal margin than in the gingival margin. 4. The marginal adaptability was in the order of the Scothbond 2$^{(R)}$ application group, the Copalite$^{(R)}$ application group and the control group.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1015-1021
• /
• 2000

Volatile flavor components (VFCs) in cooked black rices (Suwon-415 and Chindo) were studied. The major reactions during cooking, which result in aroma volatiles, are the Maillard reaction between amino acids and reducing sugars, and thermal degradation of lipid. Black rices washed with water were soaked in 1.5 folds water and heated at $110^{\circ}C$ in oil bath for 30min. VFCs in cooked black rices were extracted for three hours by SDE and were analyzed by GC and GC/MS. A total of 91, 82 volatiles were identified in Suwon-415 and Chindo black rice, respectively. Suwon-415 was composed of 26 alcohols, 10 aldehydes, 5 acids, 11 esters, 15 ketones, 9 hydrocarbons, 3 furans, 3 nitrogen containing compounds and 9 sulfur containing compounds. Chindo was composed of 28 alcohols, 9 aldehydes, 4 acids, 12 esters, 14 ketones, 5 hydrocarbons, 3 furans, 3 nitrogen containing compounds and 4 sulfur containing compounds.

• Korean Journal of Food Science and Technology
• /
• v.44 no.3
• /
• pp.263-268
• /
• 2012

Novobiocin is a coumarin-containing antibiotic, and has a longer half-life in various animals than other veterinary medicines. A simple and rapid high-performance liquid chromatography assay for the determination of residual novobiocin levels in chicken, beef and milk has been developed and validated. The separation condition for HPLC/UVD was optimized by a MG II $C_{18}$ (4.6 mm $ID{\times}250$ mm, 5 ${\mu}m$) column with 0.1% formic acid in $H_2O$/0.1% formic acid in Acetonitrile (40/60, v/v) as the mobile phase at a flow rate of 1.0 mL/min and the detection wavelength was set at 340 nm. Residues were extracted from tissue by blending with methanol. After liquid-liquid partitioning, lipid materials were removed with n-hexane and purification as Silica (1 g, 6 mL) cartridge with 10 mL acetone/dichloromethane (10/90, v/v). Limit of quantification and linearity performed by the analytical method were 0.02 mg/kg and 0.999 ($r^2$), and the recovery range was $88.8{\pm}5.6-100.3{\pm}4.4$, $88.8{\pm}7.2-97.0{\pm}3.2$ and $88.1{\pm}4.3-92.8{\pm}3.6%$. It is expected that this analytical method with regards to novobiocin in chicken, beef and milk could be applied as an official method to administer food safety on veterinary medicines.

• Molecules and Cells
• /
• v.40 no.10
• /
• pp.752-760
• /
• 2017

A2B adenosine receptor (A2BAR) is known to be the regulator of bone homeostasis, but its regulatory mechanisms in osteoclast formation are less well-defined. Here, we demonstrate the effect of A2BAR stimulation on osteoclast differentiation and activity by RANKL. A2BAR was expressed in bone marrow-derived monocyte/macrophage (BMM) and RANKL increased A2BAR expression during osteoclastogenesis. A2BAR stimulation with its specific agonist BAY 60-6583 was sufficient to inhibit the activation of ERK1/2, p38 MAP kinases and $NF-{\kappa}B$ by RANKL as well as it abrogated cell-cell fusion in the late stage of osteoclast differentiation. Stimulation of A2BAR suppressed the expression of osteoclast marker genes, such as c-Fos, TRAP, Cathepsin-K and NFATc1, induced by RANKL, and transcriptional activity of NFATc1 was also inhibited by stimulation of A2BAR. A2BAR stimulation caused a notable reduction in the expression of Atp6v0d2 and DC-STAMP related to cell-cell fusion of osteoclasts. Especially, a decrease in bone resorption activity through suppression of actin ring formation by A2BAR stimulation was observed. Taken together, these results suggest that A2BAR stimulation inhibits the activation of ERK1/2, p38 and $NF-{\kappa}B$ by RANKL, which suppresses the induction of osteoclast marker genes, thus contributing to the decrease in osteoclast cell-cell fusion and bone resorption activity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.66-66
• /
• 2011

Anodic titanium dioxide (TiO2) nanotubes are very attractive materials for gas sensors due to its large surface to volume ratios. The most widely known method for fabrication of TiO2 nanotubes is anodic oxidation of metallic Ti foil. Since the remaining Ti substrate is a metallic conductor, TiO2 nanotube arrays on Ti are not appropriate for gas sensor applications. Detachment of the TiO2 nanotube arrays from the Ti Substrate or the formation of electrodes onto the TiO2 nanotube arrays have been used to demonstrate gas sensors based on TiO2 nanotubes. But the sensitivity was much lower than those of TiO2 gas sensors based on conventional TiO2 nanoparticle films. In this study, Ti thin films were deposited onto a SiO2/Si substrate by electron beam evaporation. Samples were anodized in ethylene glycol solution and ammonium fluoride (NH4F) with 0.1wt%, 0.2wt%, 0.3wt% and potentials ranging from 30 to 60V respectively. After anodization, the samples were annealed at $600^{\circ}C$ in air for 1 hours, leading to porous TiO2 films with TiO2 nanotubes. With changing temperature and CO concentration, gas sensor performance of the TiO2 nanotube gas sensors were measured, demonstrating the potential advantages of the porous TiO2 films for gas sensor applications. The details on the fabrication and gas sensing performance of TiO2 nanotube sensors will be presented.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.2
• /
• pp.123-127
• /
• 1987

The Pungent principles and Essential oil compositions of Zanthoxylum piperitum $D_E$ $C_{ANDOLIE}$(peel, barb) were analysed by HPLC and GC, respectively. Total Pungent principle contents of peels were about as 12 times as those of barks. The Sanshool I, Sanshool IV, Sanshool III and Sanshoo V were the major Pungent principles in the peels and barks. Besides, several Unknown Pungent principles were discovered in the peels and barks, too. Total Essential oil contents of peels were higher than those of barks at the ratio of 1.8 % to 0.5%. The Cineol+Limonene(37.7%) were the main Essential oil compositions in the peels, while ${\alpha}-Terpineol(16.5%)$ and Pinene(15.5%) were the major portion in the barks. The Essential oil of peels and barks were composed Pinen, Myrcene, Cineol+Limonene, Linalool, Isopulegol, Terpinen-4-ol, ${\alpha}-Terpineol$ and Piperitone. Besides, seven Unknown compositions were discovered, too.