• Korean Journal of Weed Science
• /
• v.5 no.2
• /
• pp.96-102
• /
• 1985

A study on the competition-ecological classification of the 10 prominent paddy weed species around bulrush (Scirpus juneoides) to simplify the weed problem concept for the rice production. A serial assessments on the competition ability in space and dry matter production(nutrient depletion) of respective weed species and paddy rice, and the data were used to compute the phenotypic similarity by Single Link Clustering method. Both growth response of weed species in mono- and under the paddy rice standing was very similar (r = 0.969), but the reduction rate as affected by paddy rice standing was negatively correlated with the ability in space-competition(r=-0.513). Dendrogram of 10 weed species based on the phenotypic similarity computed in 4 characters in mono- and under the paddy rice standing was also similar, as Echinochloa c., Ludwigia p., Cyperus s., and Scirpus m. in I-group, Eleocharis k., Scirpus j, in II-group, and Juncus e., Potamogeton d. in III-group, respectively. Also, that of paddy rice to 10 weed species showed Fimbristylis m., Scirpus j., Eleocharis k., Scirpus m., Juncus e. in I-group, and Ludwigia p., Potamogeton d., Monochoria v. in II-group, respectively. The integrated dendrogram by the above two data indicate the I-group with Fimbristylis m., Scirpus j., Eleocharis k. and Juncus e., as higher growth response with relatively lower competition ability to paddy rice, II-group with Cyperus s., Echinochloa c., Potamogeton d., and Ludwigia p., as higher both in growth and competition, and the last, III-group with Monochoria v., and Scirpus m., as lower growth but higher competition, respectively.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.545-554
• /
• 2003

Design of the optical modulator composed of a three-waveguide coupler and CPW traveling-wave electrodes was carried out. Switching phenomena of three-waveguide couplers were analyzed by using the coupled mode theory, and the coupling-lengths of the devices were calculated by means of the FDM. CPW traveling-wave electrodes were analysed by the CMM and SOR simulation technique in order to find the conditions of phase-velocity and impedance matching. Traveling-wave modulators were fabricated on z-cut LiNbO$_3$ substrate. Ti was in-diffused in LiNbO$_3$ to make waveguides and Au electrodes were built on the waveguides by the electrolyte technique. The fabricated modulator chip was end-polished, pig-tailed and packaged in a brass mount with K-connector. The insertion loss and the switching voltage of the optical modulator were about 4㏈ and 19V, respectively. Network analyzer was used to obtain the S parameter and the corresponding RF response. From the measurement, parameters of the traveling-wave electrodes were extracted to be Z$_{c}$= 45 Ω, N$_{eff}$=2.20, and $\alpha$$_{0}$=0.055/cm√GHZ. The measured optical response R($\omega$) was compared with the theoretically estimated one, showing both responses agree well. The measurement results revealed that 3㏈ bandwidth turned out to be about 13 GHz.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.282-293
• /
• 2008

Partially sulfonated poly(aryl ether sulfone) membranes were prepared from the sulfonated sulfone monomer, which was synthesized by a nucleophilic substitution, non-sulfonated monomers and potassium carbonate by a direct polymerization method and a subsequent solution casting technique with mixed solvents of N-methyl-2-pyrrolidone (NMP) and dimethylacetamide (DMAc). To investigate the effect of mixed solvent, the volume ratios of NMP and DMAc were varied in the range of $0{\sim}100%$ and the degrees of sulfonation of the copolymers were fixed as 50%. The surface properties of the resulting membranes were examined by scanning electron microscope (SEM) and atomic force microscope (AFM), and a comparative study of the morphology changes and the physicochemical properties such as proton conductivity and methanol permeability was achieved. It was found that proton conductivities depend on the volume ratio of NMP-DMAc mixed solvents, and the proton conductivity determined at the condition of $25^{\circ}C$ and 100% relative humidity was $1.38{\times}10^{-1}\;S/cm$ for the membrane prepared in the 50:50 v/v-% of NMP : DMAc mixed solvent.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.1 s.53
• /
• pp.67-77
• /
• 2007

Site coefficients in IBC and KBC codes have some limits to predict the rational seismic responses of a structure, because they take into account only the effect of the soil amplification without the effects of the structure-soil interaction. In this study, upper and lower limits of the site coefficients are estimated through the pseudo 3-D elastic seismic response analyses of structures built on the linear or nonlinear soil layers taking Into account the effects of the structure-soil interaction. Soil characteristics of site classes of A, B and C were assumed to be linear, and those of site classes of D and E were done to be nonlinear and the Ramberg-Osgood model was used to evaluate shear modulus and damping ratio of a soil layer depending on the shear wave velocity of the soil layer, Seismic analyses were performed with 12 weak or moderate earthquake records scaled the peak acceleration to 0.1g or 0.2g and deconvoluted as earthquake records at the bedrock located at 30m deep under the outcrop. With the study results of the elastic seismic response analyses of structures, new standard response spectrum and upper and lower limits of the site coefficients of $F_{a}\;and\;F_{v}$ at the short period range and the period of 1 second are suggested including the effects of the structure-soil interaction, and new site coefficients for the KBC code are also suggested.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.1999-2010
• /
• 1992

The fixed slab analogy device which can measure stress intensity factors(S.I.F) experimentally by slab analogy theory is developed in this paper. The margin of errors resulted from the new testing apparatus are between 0.02% and 8.25%. Therefore, it is assured that this one can be effectively used for the more accurate measurement of S.I.F.( $k_{I}$, $k_{I I}$) than conventional apparatus. The pitch of master grating used in this experiment is 0.1mm It is known that the ratio of the distance from crack tip to the crack length on obtaining the accurate stress intensity factor is between 0.4 and 0.7. The optimum curvature radius of slab is about 125mm. The thickness of slab(plate) used in the fixed slab analogy device is 0.05mm(P.V.C. ; E = 64 MN/ $m^{2}$, .nu.=0.38), which is proved to be suitable for the test. The optimum material for the frame(slab`s external boundary) is a alloy tool steel(SKS 5) plate and its thickness is 1mm. In this research, the rigid cracks are directly bonded to the slab surface by cyanoacrylate adhesive for the easiness of slab making and conformity to the practical crack figure. The material of rigid crack is thin steel plate. It is expected that the developed method can be used effectively for the analysis of $k_{I}$ and $k_{I I}$ of arbitrary shaped or distributed cracks.cks.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.211-215
• /
• 2005

Three curcuminoids [curcumin (CUR), demethoxycurcumin(DEM), bisdemethoxycurcu in (BIS)] are major yellow pigments in turmleric (Curcuma longa L.) root. Contents of curcuminoids in turmeric roots collected from 6 locations were analyzed using, high performance liquid chromatography (HPLC) equipped with reversed-phase column, an UV-Vis detector at 420nm, and eluted with a mixture of acetonitrile: $0.1\%$ acetic acid in water (50 : 50, v/v) as mobile phase. The stability of curcuminoid pigments in $80\%$ methanol extract solution were investigated during storage in a freezer at $-20^{\circ}C$, room temperature in the dark, and light condition. Calibration curves for the determination of curcuminoids were made with significant linearity $(r^2=0.999**)$. Average content of total curcuminoids was 171.5 mg/g, with 91.6 mg/g of CUR, 56.9 mg/g of DEM, and 23.0 mg/g of BIS. Amount of curcuminoids during storage in a freezer was almost not changed while those in room temperature wert reduced and rapid degradation appeared after 60 days. Within 90 days, about $50\%$ curcuminoid decreased in the dark and about $70\%$ in the light condition, indicating the decomposition of curcuminoid pigments followed under light and heat.

• Applied Microscopy
• /
• v.35 no.4
• /
• pp.55-63
• /
• 2005

The characteristics of primary cultured rat brain microvessel endothelial cells (RBMECs) were studied using microscopy, immunohistochemistry and measuring of transendothelial electrical resistance (TER). The RBMECs formed a monolayer by $5{\sim}6$ days after plating and showed characteristics of whirling appearance. The TER increased until day 5 and decreased then. There was few immunoreaction with anti-GFAP, anti-GalC, anti-neurofilament 160/200 kD antibodies. So the contamination of astrocyte, oligodendrocyte, and neuron. could be ruled out.. Immunoreaction to vWF antigen was widespread througout the cytoplasm as Weibel-Palade granule. Immunoreaction to tight junction proteins, i.e. occludin, ZO-1, and ZO-2 was seen at cell contact. In summary, RBMECs isolated and cultured showed morphological, immunohistochemical and electrical characteristics of blood-brain barrier (BBB). The in vitro BBB model can be used in studying characteristics of in vivo BBB.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.499-504
• /
• 2000

Recently there have been many investigations on the synthesis and properties of transition metal trialuminides based on Ti, Zr, V, Nb and Ta for use aircraft structure materials in an elevated environment. The effect of Zr additions on the formation behaviour of Al-Nb alloy was investigated. Al-1.3at.%(Nb+Zr) alloys with different Nb to Zr atomic 1:3, 1:1 and 3:1 were prepared by mechanical alloying(MA). The morphological changes and microstructural evolution of Al-Nb-Zr powders during MA were investigated by SEM, XRD and TEM. The intermetallic compound phase of $Nb_2Al\; and\; Al_3Zr_4$ was identified by X-ray diffraction. The intemetallic compound of $Al_3Zr,\; Al_3Nb$ and $Al_3Zr_4$ were formed by heat treatment for 1 hour at $500^{\circ}C$. The size of intermetallic compounds observed by TEM were approximately below 100nm, when they were heat treated after mechanically alloying for 30 hours.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.2
• /
• pp.77-85
• /
• 1996

The study on the ripening of leather waste sludge was performed to vemistabilize the sludge effectively using a laboratory scale darkened wood box reactor ($10{\times}10{\times}20cm$). The acceptable feed conditions for earthworm of Eh, alkalinity were obtained in the 30th and 35th days, respectively. The value of pH was gradually decreased from 7.8 to 7.1 through the ripening time. The contents of heavy metals of the ripened sludge were estimated as lower levels compared to the other regulatory standards for compost. After the ripening time for 50days, the physico-chemical properties of the sludge were estimated as pH 7.1, water content 72%, redox potential 85mV, electrolytic conductivity $2,620{\mu}mhos/cm$ and alkalinity 450 ppm as $CaCO_3$, respectively. In the ripened sludge, survival rate of the earthworms for 50 days was about 75%, and the live weight increase rate was about 230% at the temperature range of $20{\sim}25^{\circ}C$. Moreover, hatching rate of the earthworm cocoons was about 87% and the highest value was obtained in the 20~30th days. From the above results, it was evaluated that leather waste sludge could be vermistabilized effectively by earthworms, when the sludge was ripened during 50 days.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.1-22
• /
• 1999

In order to investigate various physical and biological properties of dental magnetic attachments studies on retentive characteristics, corrosion properties, cytotoxicity of different magnetic systems for dental applications were done. For the study of retentive characteristics changes of retentive force by increasing air gap, wear properties of various attachment systems and loss of magnetic force by heat treatment were measured. Forte study of corrosion property of magnet covering metal electrochemical corrosion was done in artificial saliva and 0.9% NaCl solution between $-1,000mV_{SCE}\;and\;+1,000mV_{SCE}$. Anodic polarization curves are obtained about 6 types of samples and 2 types of solution. Corroded surfaces were examined with metallurgical microscope, scanning electron microscope and surface profilometer. For the study of cytotoxicity of magnetic attachment and its field cell growth and agar overlay test were done. The results of this study were as follows. 1. In Magnetic attachments using closed circuit retentive force at zero air gap was greater than magnets using open circuit, but decrease of retentive force by increasing air gap was also greater than open systems. 2. After 40,000 cycles of wear test all mechanical attachment resulted in varing degree of retention loss but in magnetic attachments no loss of retentive force was observed. 3. The magnetic attachment using Neodymium magnet showed early loss of retentive force about $200^{\circ}C$ but attachment using Samarium magnet showed some resistance to heat treatment and complete retention loss was observed about $500^{\circ}C$. The keeper was not influenced by heat treatment in retention. 4. In electrochemical corrosion test Dyna magnetic attachment covering metal showed the highiest corrosion resistance and Shiner magnet covering metal showed the least corrosion resistance and examination of corroded surface with metallurgical microscope, scanning electron micro-scope and surface profilometer also showed same results with anodic polarization corves. 5. The result of cell culture tests on the magnet covered with metal showed least recognizable cytotoxicity.