• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.152-152
• /
• 2010

이종접합 태양전지에서 Intrinsic a-Si:H의 역할은 상당히 중요하다. Passivation 효과와 높은 Voc에 이르는 핵심적인 Layer이다. 본 연구는 Intrinsic a-Si:H Layer의 증착조건을 가변하여 최적의 Passivation 효과를 얻는데 목적이 있다. 웨이퍼는 n-Type $500\;{\mu}m$두께에를 사용하였다. Intrinsic a-Si:H Layer는 $SiH_4$ 가스와 $H_2$ 가스를 혼합하여 증착하게 되는데 혼합비는 1:5로 고정하였다. 증착두께는 이종접합 태양전지에서 필요한 5nm로 고정하였으며 증착장비는 PECVD를 이용하였다. PECVD는 VHF(60MHz)를 이용하였고 증착온도는 $200^{\circ}C$로 고정하여 진행하였다. 가변내용은 전극거리와 파워, 압력이다. 전극거리는 20mm에서 80mm까지 가변하였고 압력은 100mTorr에서 500mTorr까지 가변하였다. 파워는 플라즈마의 방정특성을 알아본 후 최소파워를 이용하여 증착하였다. 이는 증착 시 플라즈마에 의한 박막 손상을 최소화하기 위함이다. 측정은 QSSPC 방식으로 Carrier Lifetime과 Implied Voc를 측정하였으며 두께는 Ellipsometry를 이용하여 측정하였다. 전극거리 60mm에서 증착압력은 400mTorr이고 파워는 $14mW/cm^2$에서 가장 높은 Carrier Lifetime 과 Implied Voc를 나타내었다. Carrier Lifetime은 2.2ms이고 Implied Voc는 709mV를 달성 하였다. Carrier Lifetime이 높으면 Surface Recombination이 낮다는 의미이며 이는 고효율 이종접합 태양전지 제작에 있어서 직렬저항을 줄일 수 있는 필수적인 요소이다. Implied Voc는 이종접합 태양전지의 Voc에 직결된 인자로 이종접합 태양전지의 Voc를 예상할 수 있는 중요한 요소이다.

• Journal of Korean Society on Water Environment
• /
• v.23 no.2
• /
• pp.244-250
• /
• 2007

This study was carried out to obtain the optimum design factors for an eletrolytric flotation reactor. When the effluent of the leachate treatment facility was treated under the condition of 10 volts, 30 minutes, at the Al-Al electrode system; COD removal efficiency was 45%, and total phosphorus removal efficiency was 98%. The high removal efficiency was caused by the fact that phosphate was removed by leaching $Al^{3+}$ from two electrodes. The leachate containing high ammonium nitrogen concentration was treated by a batch test under the condition of 60 minutes reaction time and added chloride ion; ammonium nitrogen removal efficiency was 89%. This high efficiency was affected by added chloride ion to wastewater. To find the optimum current density and voltage of the leachate containing chloride ion (ratio of $Cl^-/NH_4-N$ is 11) a electrochemical polarization curve was used. These values were found to be $4.5mA/cm^2$ and about 2.1 V, respectively. When C-Al electrode system was used at a batch test, the total nitrogen removal efficiency was increased by 1.8 to 3.3 times, compared to Al-Al electrode system due to high $Cl_2$ gas production.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.5
• /
• pp.511-516
• /
• 1992

The catalytic oxidation of CO on perovskite $Eu_{1-x}Sr_xCoO_{3-y}$, has been investigated at reaction temperatures from 100 to $250^{\circ}C$ under stoichiometric CO and $O_2$ partial pressures. The microstructure and Sr-substitution site of the catalyst were studied by means of infrared spectroscopy. The reaction rates were found to be correlated with 1.5-and 1.0-order kinetics with and without a $CO_2$ trap, respectively; first-and 0.5-order with respect to CO and 0.5-order to $O_2$ with the activation energy of 0.37 eV $mol^{-1}$. It was found from IR, ${\sigma}$ and kinetic data that $O_2$ adsorbs as an ionic species on the oxygen vacancies, while CO adsorbs on the lattice oxygens. The oxidation reaction mechanism is suggested from the agreement between IR, ${\sigma}$ and kinetic data.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.3
• /
• pp.383-386
• /
• 1986

To Study the relationships between rapeseed yield and meteorogical elements, the investigation into the important agronomic characters of Yudal cultivar and climate factors such as precipitation, and temperature from 1975 to 1984 was made. Yearly variation of C. V.(%) were highly significant for yield and the important agronomic character. Correlation coefficients between precipitation of May and Yield or agronomic character were significantly positive. Regression equations between the precipitation of Mayor minimum temperature of February and yield were Y=210.914+1.719X and Y=245.560-1.720X, respectively. Low temperature of February affected rapeseed yield reduction significantly.

• Korean Journal of Microbiology
• /
• v.51 no.3
• /
• pp.288-299
• /
• 2015

Lactobacillus brevis BK11 obtained from Baikkimchi was selected to study the effects of culture medium, initial pH, atmosphere composition, incubation temperature and time, and prebiotics on growth and production of antimicrobial substances. Growth and antimicrobial substances production of L. brevis BK11 were significantly higher in MRS broth than in BHI or M17 broth. The production of cell mass, lactic acid, and bacteriocin by BK11 strain was at maximum in MRS broth adjusted to pH 6.0. Aerobic and microaerobic conditions were favored cell growth and antimicrobial substances production than anaerobic condition. Biomass and lactic acid production and antimicrobial substances activity of BK 11 were significantly better at 30 and $37^{\circ}C$ than at $25^{\circ}C$. Growth of the strain BK11 entered the stationary growth stage at 24 h after inoculation, and decreased after 36 h. Antimicrobial activities of cell-free culture supernatant and bacteriocin solution were highest when cultured in MRS broth with an initial pH 6.0 for 24-30 h at $37^{\circ}C$. In addition, the highest cell number and lactic acid and bacteriocin production were recorded in the presence of 1 and 2% (w/v) fructooligosaccharide (FOS), however, inulin and raffinose did not affect biological and physicochemical characteristics and antimicrobial activities of L. brevis BK11 cultures. According to these results, production of antimicrobial substances by L. brevis KB11 was closely associated with cell density. Under optimal conditions for antimicrobial substances production, L. brevis BK11 effectively inhibited the growth of Helicobacter pylori ATCC 43504.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.7
• /
• pp.909-914
• /
• 2023

While searching for the bacteria which are responsible for degradation of pesticide in soybean field soil, a novel bacterial strain, designated 5-5^T, was isolated. The cells of the strain were Gram-staining-positive, aerobic and non-motile rods. Growth occurred at 10-42℃ (optimum, 30℃), pH 5.5-9.0 (optimum, pH 7.0-7.5), and 0-2% (w/v) NaCl (optimum, 1%). The predominant fatty acids were C_15:0 anteiso, C_17:0 anteiso, and summed feature 8 (C_18:1 ω7c and/or C_18:1 ω6c). The predominant menaquinone was MK-9 (H₂). Diphosphatidylglycerol, glycolipids, phosphatidylinositol, and phosphatidylglycerol were the major polar lipids. Phylogenetic analysis of 16S rRNA gene sequences indicated that strain 5-5^T is a member of the genus Sinomonas and its closest relative is Sinomonas humi MUSC 117^T, sharing a genetic similarity of 98.4%. The draft genome of strain 5-5^T was 4,727,205 bp long with an N50 contig of 4,464,284 bp. Genomic DNA G+C content of strain 5-5^T was68.0 mol%. The average nucleotide identity (ANI) values between strain 5-5^T and its closest strains S. humi MUSC 117^T and S. susongensis A31^T were 87.0, and 84.3 % respectively. In silico DNA-DNA hybridization values between strain 5-5^T and its closest strains S. humi MUSC 117^T and S. susongensis A31^T were 32.5% and 27.9% respectively. Based on the ANI and in silico DNA-DNA hybridization analyses, the 5-5^T strain was considered as novel species belonging to the genus Sinomonas. On the basis of the results from phenotypic, genotypic and chemotaxonomic analyses, strain 5-5^T represents a novel speciesof the genus Sinomonas, for which the name Sinomonas terrae sp. nov. is proposed. The type strain is 5-5^T (=KCTC 49650^T =NBRC 115790^T).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.959-967
• /
• 2005

The color of apparels has the interaction of the face skin colors of the wearers. This study was carried out to classify the face skin colors of Korean males into several similar face skin colors in order to extract favorable colors which flatter to their face skin colors. The criterion that select the new subjects who have the classified face skin colors have to be decided. With color spectrometer, JX-777, face skin colors of subjects were measured quantitatively and classified into three clusters that had similar hue, value and chroma with Munsell Color System. Sample size was 418 Korean males and other 15 of new males subjects. Data were analyzed by K-means cluster analysis, ANOVA, Duncan multiple range test, Stepwise discriminant analysis using SPSS Win. 12. Findings were as follows: 1. 418 subjects who have YR colors were clustered into 3 kinds of face skin color groups. 2. Discriminant variables of face skin colors was 4 variables : L value of forehead, v value of cheek, c value of forehead, and b value of cheek from standardized canonical discriminant function coefficient 1 and c value of forehead, L value of forehead, b value of cheek. and L value of cheek from standardized canonical discriminant function coefficient 2. 3. Hit ratio of type 1 was $92.3\%$, of type 2 was $96.5\%$ and of type 3 was $92.6\%$ by the canonical discriminant function of 4 variables. 4. The canonical discriminant function equation 1 and 2 were calculated with the unstandardized canonical discriminant function coefficient and constant, the cutting score, and range of the score were computed. 5. The criterion that select the new subjects who have the classified face skin colors was decided.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.410.2-410.2
• /
• 2016

Tandem structure is promising in organic solar cells because of its double open-circuit voltage (VOC) and efficient photon energy conversion. In a typical tandem device, the two single sub-cells are stacked and connected by an interconnecting layer. The fabrication of two sub-cells are usually carried out in a glovebox filled with nitrogen or argon gas, which makes it expensive and laborious. We report a glovebox-free fabricated inverted tandem organic solar cells wherein the tandem structure comprises sandwiched interconnecting layer based on p-doped hole-transporting, metal, and electron-transporting materials. Complete fabrication process of the tandem device was performed outside the glove box. The tandem solar cells based on poly(3-hexylthiophene) (P3HT) and (6,6)-phenyl C61-butyric acid methyl ester (PCBM) can realize a high VOC, which sums up of the two sub-cells. The tandem device structure was ITO/ZnO/P3HT:PCBM/PEDOT:PSS/MoO3/Au/Al/ZnO-d/P3HT:PCBM/PEDOT:PSS/Ag. The separate sub-cells were morphologically and thermally stable up to 160 oC. The high stability of the active layer benefits in the fabrication processes of tandem device. The performance of tandem organic solar cells comes from the sub-cells with an 50 nm thick active layer of P3HT:PCBM, achieving an average power conversion efficiency (PCE) of 2.9% (n=12) with short-circuit current density (JSC) = 4.26 mA/cm2, VOC = 1.10 V, and fill factor (FF) = 0.62. Based on these findings, we propose a new method to improve the performance and stability of tandem organic solar cells.

• Restorative Dentistry and Endodontics
• /
• v.29 no.5
• /
• pp.413-422
• /
• 2004

Established microleakage tests have their own disadvantages. In this study, 3D reconstruction method was tried to overcome these disadvantages. Four types of microleakage tests were used and relationships among them were estimated: penetrated dye volume: marginal adaptability: degree of dye penetration and relative penetrated length to cavity wall. Twenty-four Class V cavities were bulk filled with composite (Esthet X) following surface treatments: N group (no treatment): E group (etching only): T group (etching + Prime & Bond NT). 50% silver nitrate was used as a dye solution after thermocycling ($5^{\circ}C{\;}&{\;}55^{\circ}C$, 1.000 times). Teeth were serially ground with a thickness of 0.2 mm. Volume of dye penetration was estimated from a three-dimensionally reconstructed image with a software (3D-DOCTOR). Percentage of margin without gap was estimated from SEM and degree of dye penetration and the relative length of dye penetration to overall cavity wall were also estimated. ANOVA and Scheffe test for dye volume, Kruskal-Wallis and Mann-Whitney test for marginal quality, Spearman's rho test for checking of relationships among methods were used. The results were as follows: 1. Dye penetration could be seen from several directions, furthermore, its volumetric estimation was possible. 2. Reverse relationship was found between dye volume and marginal quality (r = -0.881/ p = 0.004). 3. Very low relationship was seen between dye volume and two-dimensional tests (degree of dye penetration and relative length). However, 2D evaluation methods showed high relationship (p = 0.002-0.054) each other. 4. Three times vertical section could be recommended as a 2D test.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.5
• /
• pp.754-759
• /
• 2002

In order to develope a new pretense applicable to industries, a bacterium which produces a remarkable amount of extracellular pretense were isolated from soil. About 10 bacterial strains producing pretense were isolated from samples of soil, and strain PANH765 showed the highest activity of pretense production among them. The strain was identified as Bacillus subtilis according to the Bergey's Manual of Systematic Bacteriology based on its morphological, cultural and physiological characteristics. B. subtilis PANH765 showed the maximal production of pro-tease in the medium containing 2.0% glucose, 1.0% yeast extract, 0.2% ammonium nitrate, 0.02% ferrous sulfate and 0.02% dipotassium hydrogen phosphate. Under the optimal condition with temperature of 3$0^{\circ}C$, initial pH of 7.0 and shaking speed of 150 rpm, the pretense production reached a maximum level with 36 hr cultivation (6.34 U).