• Title/Summary/Keyword: V2C

Search Result 9,803, Processing Time 0.062 seconds

A study on the fabrication and the extraction of small signal equivalent circuit of power AlGaAs/GaAs HBTs (전력용 AlGaAs/GaAs HBT의 제작과 소신호 등가 회로 추출에 관한 연구)

  • 이제희;우효승;원태영
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.33A no.6
    • /
    • pp.164-171
    • /
    • 1996
  • We report the experimental resutls on AlGaAs/GaAs heterojunction bipolar transistors (HBTs) with carbon-doped base structure. To characterize the output power, load-pull mehtod was employed. By characterizing the devices with HP8510C, we extracted the small-signal equivalent circuit. The HBTs were fabricated employing wet mesa etching and lift-off process of ohmic metals. the implementation of polyimide into the fabriction process was accomplished to obtain the lower dielectric constant resultig in significant reduction of interconnect routing capacitance. The fabricated HBTs with an emitter area of 6${\times}14{\mu}m^{2}$ exhibited current gain of 45, BV$_{CEO}$ of 10V, cut-off frequency of 30GHz and power gain of 1 3dBm. To extract the small signal equivalent circuit, the de-embedded method was applied for parasitic parameters and the calculation of circuit equations for intrinsic parameters.

  • PDF

Studies on the Constructions and Gas Temperature Dependence of the Output Power in a Nitrogen Laser (질소레이저의 제작과 질소기체의 온도변화에 따른 출력특성 연구)

  • 양준묵;김원호;김기덕;이치원;추한태
    • Korean Journal of Optics and Photonics
    • /
    • v.6 no.2
    • /
    • pp.122-129
    • /
    • 1995
  • 질소 기체의 온도변화에 따른 질소 레이저의 동작 특성을 조사하고 실험에 의해 얻은 E/P값을 이론치와 비교 연구하였다. 이를 위하여 레이저 관의 길이가 200mm이고, 다중 평행판 축전기형 전송 회로 및 질소 기체의 온도 조정 장치로 구성된 질소 레이저를 제작하였다. 반복률 20Hz에서 스파크 갭의 전극 거리 4mm일 때 최대출력을 얻었으며 최적동작 조건은 질소 기체 온도 $30^{\circ}C$, 기체 압력 70torr이었다. 이때의 E/P는 411V/cm.torr이었다. 한편 질소 기체의 온도가 증가함에 따라 최적 동작 조건은 높은 압력 쪽으로 이동하는 경향을 보였고 이때 E/P값은 감소하는 것으로 나타나 이론과 어느 정도 일치함을 알 수 있었다.

  • PDF

Optimum condition of Acetic acid Fermentation for Persimmon Vinegar Preparation and Quality evaluation of Persimmon Vinegar (감식초 제조를 위한 초산발효 최적 조건 및 감식초의 품질특성)

  • 정석태;김지강
    • Food Science and Preservation
    • /
    • v.3 no.2
    • /
    • pp.171-178
    • /
    • 1996
  • This study was carried out for the purpose of improving the persimmon vinegar. The acetic acid bacteria strain JST-3, using acetic acid fermentation was isolated from the traditional persimmon vinegar. The optimum conditions for high yield of acetic acid were studied in the shaking bath. Acetic acid bacteria was cultured at 3$0^{\circ}C$ for 4 days and transferred to persimmon alcoholic juice for acetic acid fermentation. The optimum initial acidity for acetic acrid fermentation was 1%(w/v) and the addition of glucose or yeast extract was observed to produce relatively low yield of acetic acid. Succinic and acetic acid were major organic acid in the persimmon vinegar, The contents of lactic acid which was known to increase off-flavor were very low. Sensory evaluation revealed that the persimmon vinegar prepared in this study was superior to two commercial ones in the aroma and taste.

  • PDF

Performance change of Polymer electrode Membrane operating temperature (PEMFC 고분자 전해질막의 운전온도에 따른 성능변화)

  • Lee, Ho;Shin, Kang-Sup;Park, Kwon-Pil
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2007.11a
    • /
    • pp.180-182
    • /
    • 2007
  • PEMFC의 상용화 진입에 있어서 걸림돌 중의 하나가 열화(degradation)에 의한 성능감소이다. PEMFC 고분자 막의 열화가 PEMFC 성능 감소에 많은 영향을 미친다. 고분자 막의 성능 감소 원인은 여러가지가 있지만 무가습/OCV조건에서 성능 감소가 잘 된다. 그 이유에 대해서는 OCV/무가습 조건에서 과산화수소나 라디칼이 많이 형성될 수 있다는 것과, OCV조건에서 사용되지 못하는 수소와 산소의 gas-crossover 가 많기 때문이라는 것 그리고 무가습 조건에서 수소와 산소의 분압이 높아 gas-crossover 가 유리하고 악의 건조에 따른 물리적인 영향 등등이 거론되고 있다. 본 연구에서는 같은 조건에서 Cell 운전온도가 막열화에 미치는 영향을 실험하였다. OCV 여려 조건 에서 단위전지 실험을 한 후 I-V, 수소 투과도, 임피던스, FER(fluoride emission rate)등을 측정해 그 결과를 검토 분석하였다. OCV/Anode 무가습 조건이 알려진 대로 막열화 가속조건 이었음을 확인하였고, 실험 결과 Cell 운전온도가 $10^{\circ}C$증가 할 때마다 FER(fluroide emission rate)이 즉 막 열화속도가 약 2배정도 증가함을 보였다.

  • PDF

Controlled Cooling Technical of High Tensile Valve Spring Wire Rod (고강도 엔진밸브 스프링강 선재 저온조직 발생방지 선재압연 기술)

  • 김경원;장용권;임규환;서일권
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 1999.08a
    • /
    • pp.172-179
    • /
    • 1999
  • As the martensite structure cause fracture failure during drawing from 5.5mm rod to 3.05mm dia. wire without additional heat treatment, the optium cooling condition to inhibit the occurrence of martensite was investigated. In order to get SAE9254+V quality, the effects of alloying element, vanadium on the mechanical properties were investigated. Based upon CCT and TTT curves and the results form cooling test in mill, optimun cooling was found in the condition of the laying head temp of 780$^{\circ}C$ and of the conveyor speed at 0.15m/sec with the whole cover closed. The wire rods produced under the condition showed the best mechanical properties of 120kg/$\textrm{mm}^2$ in TS and 50% in RA, having an excellent drawability. In vanadium added steels, tensile strength was improved without degrading elongation and charpy impact value. That means the strengthening by vanadium is mainly due to the grain refinement by the fine precipitates during tempering process.

  • PDF

Comparison of Gate Thickness Measurement

  • 장효식;황현상;김현경;문대원
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 1999.07a
    • /
    • pp.197-197
    • /
    • 1999
  • Gate oxide 의 두께 감소는 gate의 캐패시턴스를 증가시켜 트랜지스터의 속도를 빠르게 하며, 동시에 저전압 동작을 가능하게 하기 때문에 gate oxide 두께는 MOS 공정 세대가 진행되어감에 따라 계속 감소할 것이다. 이러한 얇은 산화막은 device design에 명시된 두께의 특성을 나타내야 한다. Gate oxide의 두께가 작아질수록 gate oxide와 crystalline silicon간의 계면효과가 박막의 두께의 결정에 심각한 영향을 주기 때문에 정확한 두께 계측이 어렵다. 이러한 영향과 계측방법에 따라서 두께 계측의 차이가 나타난다. XTEM은 사용한 parameter에, Ellipsometer는 refractive index에, MEIS(Medium) Energy Ion Scattering)은 에너지 분해능에, Capacitor-Voltage 측정은 depletion effect에 의해 영향을 받는다. 우리는 계면의 원자분해능 분석에 통상 사용되어온 High Resolution TEM을 이용하여 약 30~70$\AA$ SiO2층의 두께와 계면 구조에 대한 분석을 하여 이를 MEIS와 0.015nm의 고감도를 가진 SE(Spectroscopy Ellipsometer), C-V 측정 결과와 비교하여 가장 좋은 두께 계측 방법을 찾고자 한다.

  • PDF

FUV Emission-line Morphologies of the SNR G65.3+5.7

  • Kim, Il-Joong;Seon, Kwang-Il;Min, Kyoung-Wook
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.35 no.1
    • /
    • pp.70.1-70.1
    • /
    • 2010
  • We present the far-ultraviolet (FUV) emission line morphologies in the whole region of the supernova remnant G65.3+5.7 using the FIMS/SPEAR data. The morphologies of the C IV ${\lambda}{\lambda}1548$, 1551, $H2{\lambda}1608 $, He II ${\lambda}1640$, and O III] ${\lambda}{\lambda}1661$, 1666 lines appear to correlate clearly with the optical emission line images or the ROSAT X-ray (0.11-0.284 keV) image obtained in some of the previous studies. We found that a foreground dust cloud, resonant scattering, and incompleteness of radiative shocks have made the definite differences between the morphologies of the above FUV emission lines. We also present the FUV spectra and line intensities from a few sub-regions.

  • PDF

A KMTNet search for RR Lyrae Stars in the Crater II Ultra-Faint Dwarf Galaxy

  • Joo, Seok-Joo;Sung, Eon-Chang;Kyeong, Jaemann;Han, Sang-Il;Yang, Soung-Chul;Jeong, Hyunjin
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.42 no.1
    • /
    • pp.44.4-45
    • /
    • 2017
  • We report the first detection of RR Lyrae variable stars in the Crater II dwarf galaxy, a recently discovered ultra-faint satellite of the Milky Way. Based on B, V time series photometry obtained with the Korea Microlensing Telescope Network (KMTNet) at CTIO, Chile, we have identified ~45 fundamental-mode (ab-type) and ~2 first-overtone (c-type) RR Lyrae stars by adopting template light-curve fitting method. Our preliminary analysis suggests an Oosterhoff-intermediate classification of this galaxy from the mean period of the RRab stars, <$P_{ab}$> ${\simeq}0.63$ days, and the location of them on the period-amplitude diagram. We discuss the properties of the RR Lyare stars in this galaxy.

  • PDF

Rheological Properties of Cement Using Admixtures (혼합재를 첨가한 시멘트의 레올로지 특성)

  • 양승규;이웅종;김동석;정연식;유재상;이종열
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2003.05a
    • /
    • pp.271-276
    • /
    • 2003
  • This study is about the rheological properties of cement slurry using admixtures. The variables are the type of cement(Type I, II, IV, V) and the substitution ratio of admixtures such as fly ash and slag. As a result of measuring the fluidity of various types of cement slurry at the early stage, type 2, type 4 and type 5 showed the similar property. The fluidity of type 1 and ternary blended cement was low. it is thought that it is because of the high $C_3$A content. The cement slurries containing mineral admixtures were superior in the property of fluidity retention.

  • PDF

Manufacturing of Ultrahigh Vacuum Electron Cyclotron Resonance Chemical Vapor Deposition Reactor and Si Wafer Surface Cleaning by Hydrogen Plasma (초고진공 전자 사이클로트론 공명 화학 기상증착장치의 제작과 수소 플라즈마를 이용한 실리콘 기판 표면 세정화)

  • 황석희;태흥식;황기웅
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.31A no.4
    • /
    • pp.63-69
    • /
    • 1994
  • The Ultrahigh Vacuum Electron Cyclotron Resonance Chemical Vapor Deposition(UHV-ECRCVD) system whose base pressure is 1${\times}10^{9}$ torr has been constructed. In-situ cleaning prior to the epitaxial growth was carried out at 56$0^{\circ}C$ by ECR generated uniform hydrogen plasma whose density is $10^{10}/cm{3}$. The natural oxide was effectively removed without damage by applying positive DC bias(+10V) to the substrate. RHEED(Reflection High Energy Electron Diffraction) analysis has been used to confirm the removal of the surgace oxide and the streaky 2$\times$1 reconstruction of the Si surface, and the suppression of the substrate damage is anaylized by X-TEM(cross-sectional Transmission Electron Microscopy). Surface cleaning technique by ECR hydrogen plasma confirmed good quality epitaxial growth at low temperature.

  • PDF