• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.20-20
• /
• 2011

It has been known that, under certain conditions, application of low-temperature atmospheric-pressure plasmas can enhance proliferation of cells. In this study, conditions for optimal cell proliferation were examined for various cells relevant for orthopaedic applications. Plasmas used in our experiments were generated by dielectric barrier discharge (DBD) with a helium flow (of approximately 3 litter/min) into ambient air at atmospheric pressure by a 10 kV~20 kHz power supply. Such plasmas were directly applied to a medium, in which cells of interest were cultured. The cells examined in this study were human synoviocytes, rat mesenchymal stem cells derived from bone marrow or adipose tissue, a mouse osteoblastic cell line (MC3T3-E1), a mouse embryonic mesenchymal cell line (C3H-10T1/2), human osteosarcoma cells (HOS), a mouse myoblast cell line (C2C12), and rat Schwann cells. Since cell proliferation can be enhanced even if the cells are not directly exposed to plasmas but cultured in a medium that is pre-treated by plasma application, it is surmised that long-life free radicals generated in the medium by plasma application stimulate cell proliferation if their densities are appropriate. The level of free radical generation in the medium was examined by dROMs tests and correlation between cell proliferation and oxidative stress was observed. Other applications of plasma medicine in orthopaedics, such as plasma modification of artificial bones and wound healing effects by direct plasma application for mouse models, will be also discussed. The work has been done in collaboration with Prof. H. Yoshikawa and his group members at the School of Medicine, Osaka University.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.3
• /
• pp.47-56
• /
• 2018

Research was initiated to investigate germination characteristics and germination pattern of 14 herbaceous plant entries used on the road slope during 30 days. An alternative germination condition for 14 herbaceous plant entries required by International Seed Testing Association(ISTA) was applied in the experiment, consisting of 8-hr light at $25^{\circ}C$ and 16-hr dark at $15^{\circ}C$. Significant differences were observed in the first germination rate(0.3%~40.7%)and in the final germination rate(7.7%~93.3%). Days to the first germination(2~8days), days to the 30% germination(2~6days) and days to the peak germination(6~18days) were different among 14 herbaceous plant entries in the study. From this result, we could find out higher final germination rate of 14 herbaceous plant entries in the following order; First, forage crops and cool-season turfgrasses; Second, herbeceous flowers; Third, wild plants. We could also divide germination rate among 14 herbaceous plant entries as 6 groups(I;very high, II;high, III;medium high, IV;medium low, V;low, VI;very low) based on the final germination rate and divide germination speed as 5 groups(A;very fast, B;fast, C;normal, D;slow, E;very slow)based on days to the peak germination. Considering germination characteristics and pattern of 14 herbaceous plant entries Medicago sativa, Lolium perenne, Festuca arundinacea and Cosmos sulphureus were regard as dominating species while Lespedeza cuneata, Silene armeria, Lotus corniculatus var.japonicus, Coreopsis tinctoria and Centaurea cyanus as competitive species following dominating species. However, Chrysanthemum burbankii, Pennisetum alopecuroides, Chrysanthemum boreale., Artemisia princeps var. orientalis and Arundinella hirta were not almost expected to emerge.

• Journal of Food Hygiene and Safety
• /
• v.2 no.2
• /
• pp.57-65
• /
• 1987

ABSTRACT - To examine antihypertensive components of Ganoderma lucidum in Korea, two kinds of fruiting bodies (J and K) were used for extraction with water and the extracts were purified by ethanol precipitation and dialysis. Three fractions, i.e., the aqueous total extract(A), the ethanol supernatant(B} and the purified precipitate(C), were compared for antihypertensive activity in anesthetized spontaneously hypertensive rats (SUR). Although fractions A and B showed the activity, fraction C did not. Particularly, fraction B of sample K produced 44.3% reduction in diastolic blood pressure and 30.6% reduction in heart rate after i.v. administration of a dose of 10 mg/kg. Direct effects of this fraction B to the heart were observed in the isolated blood perfused heart preparation of the dog. It induced positive chronotropic and inotropic responses dose-dependently in the case of sample J. In the case of sample K, marked chronotropic and inotropic effects on atrial muscle but not on ventricular muscle were induced. In both samples, coronary blood flow (CBF) was dose-relatedly increased.reased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.8
• /
• pp.470-475
• /
• 2016

In this study, $Zn_xMn_{3-x}O_4$ (x=0.95~1.20) specimens were prepared by using a conventional mixed oxide method. All specimens were sintered in air at $1,200^{\circ}C$ for 12 h and cooled at a rate of $2^{\circ}C/min$ to $800^{\circ}C$, subsequently quenching to room temperature. We investigated the structural and electrical properties of $Zn_xMn_{3-x}O_4$ specimens with variation of ZnO amount for the application of NTC thermistors. As results of X-ray diffraction patterns, all specimens showed the formation of a complete solid solution with tetragonal spinel phase. And, the second phase was observed by the solubility limit of Zn ions in $x{\geq}1.10$ composition. The average grain size was increased from $2.72{\mu}m$ to $4.18{\mu}m$ with increasing the compositional ratio of Zn ion from x=0.95 to 1.20, respectively. $Zn_{1.10}Mn_{1.90}O_4$ specimen showed the minimum electrical resistance of $57.5k{\Omega}$ at room temperature and activation energy of 0.392 eV.

• Restorative Dentistry and Endodontics
• /
• v.16 no.1
• /
• pp.121-132
• /
• 1991

The purpose of the study was to evaluate the marginal sealing effect of composite resin inlays according to the luting techniques and compare them to the conventional direct resin filling technique. 90 cavities of class V were prepared on the buccal surface of 90 extracted molar teeth, which were divided into four groups. Cavities of control group were directly filled with Scotchbond 2 and P - 50, and those of composite resin inlay groups were luted with one of the followings: Adhesive bond followed by Adhesive cement, All bond followed by Adhesive cement, Fuji - ionomer type L All the specimens were immersed in India ink dye solution for 7 days at $37^{\circ}C$ incubator after thermocycling between $5^{\circ}C$ and $60^{\circ}C$ and longitudinally sectioned with diamond disk inot two parts All the specimens were observed at the occlusal and gingival margins and statistical analysis was performed. The results were as follows: 1. Groups filled with composite resin inlay showed less marginal leakage than the group directly filled(p<0.01). 2. There was no significant difference in marginal leakage between composite resin inlay groups luted with Adhesive bond followed by Adhesive cement and the group luted with All bond followed by Adhesive cement(p>0.05). 3. At occlusal margins, Composite resin inlay group luted with Adhesive bond followed by Adhesive cement showed less marginal leakage than the group luted with Fuii ionomer type I(p<0.01). At gingival margins, composite resin inlay group luted with All bond followed by Adhesive cement showed less marignal leakage than the group luted with Fuji ionomer type I(P<0.01).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.6
• /
• pp.421-433
• /
• 2002

In order to elucidate the pathogenesis of cleft lip and palate, first of all, it is necessary to understand the developmental mechanisms of growth factors and extracellular matrix proteins in the tissues of cleft lip and palate. We have performed immunohistochemical studies on human cleft lip and palate tissues to elucidate the pathogenetic implications of cleft lip and palate. 16 specimens from postnatal human cleft lip and palate subjects and 17 specimens from autopsy of prenatal human cleft lip and palate were fixed in 10% buffered formalin, embedded in paraffin. The sections were routinely stained by hematoxylin and eosin, also stained by PAS, and followed by immunohistochemical stainings using the antiseras of growth factors and extracellular matrix proteins such as PCNA, S-100, c-erb-B2, MMP-3, MMP-10, HSP-70, transglutaninase-C, E-cadherin, VEGF, vWF. Both the prenatal and postnatal specimens of cleft lip and palate showed dysplastic proliferation of the basal cell layer, increased infiltration of melanocytes into mucosal epithelium, sebaceous gland hyperplasia ingrowing into the muscular tissue of lip and palate, and fatty infiltration into the submucosal deep connective tissue. The strong reactions of MMP-3 and HSP-70 were detected in the tissues of cleft lip and palate, especially increased in degenerating muscle bundles, while the immunostainings of PCNA and c-erb-B2 were weakly positive in the tissues of cleft lip and palate. These data suggest that the retrogressive tissue degeneration around the cleft areas persistently exist during the prenatal and postnatal period after cleft formation, and the sebaceous gland hyperplasia and fatty infiltration with the intense expression of MMP-3 and HSP-70 is closely related to the muscular degeneration around the cleft area.

• Clean Technology
• /
• v.21 no.1
• /
• pp.62-67
• /
• 2015

We have developed a versatile method for the preparation of chemically linked graphene/multi-walled carbon nanotubes (MWNTs) hybrid materials via simple acid-catalyzed dehydration reaction between graphene oxide (GO) and amine-functionalized MWNTs (af-MWNTs). In this condition, ketone (-C=O) groups in GO and primary amine (-NH₂) moieties in af-MWNTs readily react to form imine (-C=N-) linkage. The chemical structures of graphene/MWNTs hybrid materials have been investigated using various microscopic and spectroscopic measurements. As a result of the synergetic effects of hybrid materials such as improved surface area and the superior structural restoration of graphitic networks, the hybrid materials demonstrate improved capacitance with excellent long-term stability. Furthermore, controlled experiments were conducted to optimize the weight ratio of graphene/MWNTs in hybrid materials. The highest capacitance of 132.4 F/g was obtained from the GM7.5 material, in which the weight ratio between graphene and MWNTs was adjusted to 7.5/1, in 1M KOH electrolyte at a scan rate of 100 mV/s.

• Journal of Radiation Protection and Research
• /
• v.18 no.2
• /
• pp.17-25
• /
• 1993

Beta ray spectra of $^3H,\;^{14}C\;and\;^{36}Cl$ in liquid scintillation counting system have been calculated using the Monte Carlo method by which physical behaviors of particle transport in medium were simulated. The calculations have been carried out on the basis of beta rays being slowing down according to the continuous slowing down approximation(CSDA) model. Beta rays generated in simulation geometry were traced until they lost their energy below 0.3keV that in known to be the detection limit in the liquid scintillation counter. Scintillator solution in which pure beta emitting radionuclides were dissolved uniformly was assumed to be bottled in the shape of right circular cylinder with 12.5mm in radius and 35mm in height. The comparison of the calculated and measured results showed satisfactory agreement between those two, with slight discrepancy due to self quenching in the case of lower energy of emitted beta particles in the solution.

• Journal of Ginseng Research
• /
• v.17 no.1
• /
• pp.1-12
• /
• 1993

The Preventive effect of the saponin fraction of Panax ginseng C.A. Meyer against hyperchole- sterolemia was demonstrated by assaying the cholesterol and triacylglyceride level of the blood serum and liver of rats fed high-cholesterol diet with and/or without ginsenoside. To understand the mechanism of the preventive action of ginsenoside, ginsenoside effect on LDL receptor binding ability, cholesterol level, and cAMP level of Chinese hamster ovary (CHO) cells cultured under various conditions were examined. When LDL (20 $\mu$g/ml) was added to the culture medium for CHO cell culture, LDL receptor binding activity of the cell was suppressed down to 58% of that of normal group. Ginsenosides at 10--2% and 10-3% level (w/v) were shown to exert an appreciable stimulatory effect on CHO cell LDL receptor activity, which partially overcame the suppression due to the presence of LDL (20 $\mu\textrm{g}$/ml) in the medium. Ginsenosides also reduced the increased cholesterol level of test group almost to that of normal group, and it increased cAMP level, which was usually reduced to 55% of that of the normal group due to the presence of LDL in the medium. Comparison of Kd and Bmax value of CHO cells cultured under different conditions revealed that this stimulation was due not to the receptor's binding affinity but to its number. Addition of ginsenoside (10-2%) decreased the uptake of taurocholic acid as much as 20% at the actively transporting everted ileal sacs, but it failed to form a large mixed micelles with taurocholic acid, which was one of the proposed mechanisms by which ginsenoside inhibits bile acid reabsorption. From the above results, it seemed likely that ginsenoside prevented hypercholestrolemia by decreasing cholesterol level in cells thereby relieving the inhibition of LDL receptor synthesis by cholesterol and also by inhibiting bile acid reabsorption from the small intestine.

• Journal of Surface Science and Engineering
• /
• v.29 no.5
• /
• pp.345-349
• /
• 1996

The wetting property of polymer surfaces is very important for practical applications. Plasma source ion implantation technique was used to improve the wetting properties of polymer surfaces. Poly(ethylene terephtalate) and other polymer sheets were mounted on the target stage and an RF plasma was generated by means of an antenna located inside the vacuum chamber. High voltage pulses of up to -10kV, 10 $\mu$sec, and up to 1 kHz were applied to the stage. The samples were implanted for 5 minutes with using Ar, $N_2,O_2,CH_4,CF_4$ and their mixture as source gases. A contact angle meter was used to measure the water contact angles of the implanted samples and of the samples stored in ambient conditions after implantation. The modified surfaces were analysed with Time-Of-Flight Mass Spectrometer (TOF-SIMS) and Auger Electron Spectroscopy (AES). The oxygen-implanted samples showed extremely low water contact angles of $3^{\circ}C$ compared to $79^{\circ}C$ of unimplanted ones. Furthermore, the modified surfaces were relatively stable with respect to aging in ambient conditions, which is one of the major concerns of the other surface treatment techniques. From TOF-SIMS analysis it was found that oxygen-containing functional groups had been formed on the implanted surfaces. On the other hand, the $CF_4$-implanted samples turned out to be more hydro-phobic than unimplanted ones, giving water contact angles exceeding $100^{\circ}C$ . The experiment showed that plasma source ion implantation is a very promising technique for polymer surface modification especially for large area treatment.