• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.160-165
• /
• 2021

This study was conducted to investigate a suitable substrate formulation for bag cultivation of Hypsizygus marmoreus. To determine the optimum media composition for H. marmoreus, chemical properties of various media and culture properties were investigated. The fastest primordia formation (9.0 days), the shortest fruiting body harvest period (18.0 days), and the highest yield (144.7 g/bag) were realized with the T6 formulation (55:15:20:5:5 mixing ratio of poplar sawdust, wheat bran, rice bran, dried soybean powder, and palm kernel, respectively). The chemical properties of the T6 formulation were pH, 6.0; total carbon, 19.0%; total nitrogen, 0.83%; C/N ratio, 22.8; P₂O₅, 0.61%; K₂O, 0.46%; and MgO, 0.29%. This is the first attempt using plastic bags for cultivation and will help expand the production of H. marmoreus.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.1
• /
• pp.13-19
• /
• 1999

Canalicular liver plasma membrane vesicles (cLPM) were prepared according to two different methods (Inoue method and Meier method), and were evaluated for their protein yield, enzyme activity and transport characteristics. No difference was found between the methods in the protein yield (i.e., $0.14{\pm}0.031$ and $0.15{\pm}0.050$ mglg liver for Inoue method and Meier method, respectively). The activity of alkaline phosphatase, a marker enzyme of canalicular membrane, was significantly (P<0.05) higher in the vesicles of Meier method $(3.52{\pm}0.91\;mmol/mg/hr)$than in the vesicles of Inoue method ($2.28{\pm}0.94$ mmol/mg/hr) indicating that more purified cLPM were obtained from Meier method compared with Inoue method. ATP-dependent vesicular uptake of taurocholate and tributylmethylammonium (TBuMA) was observed for vesicles of both methods, and the kinetic parameters responsible for the transport were similar between the vesicles of both methods (for example, $V_{max}:$ 9.72 nmol/mg protein/30sec and $K_m:$ 0.63 mM for Inoue method; $V_{max}:$ 10.1 nmol/mg protein/30sec and $K_m:$ 0.70 mM for Meier method). A pH gradient dependent counter transport of TBuMA was also observed for both vesicles with similar kinetic characteristics. Either the uptake of taurocholate in the absence of ATP or that of TBuMA in the absence of pH gradient, which may represent passive diffusion of respective compound into the vesicles, was more rapid for the vesicles of Meier method than for the vesicles of Inoue method. For example, passive diffusion rate constants $(K_d)$ for TBuMA uptake into the vesicles were 0.00030 and 0.00052\;{\mu}l/mg$ protein/min for the vesicles of Inoue method and Meier method, respectively. It may indicate that more leaky vesicles are obtained form the Meier method compared with the Inoue method. These aspects together with the time necessary to prepare the vesicles (i.e., 8 hr for Inoue method and 23 hr for Meier method) should be considered before selecting an appropriate method for the preparation of cLPM.

• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.55-64
• /
• 2009

This study is aimed to derive the optimum mix proportion of the combined self compacting concrete according to cement types (blast-furnace slag cement and belite cement) and to propose the basic data to field construction work after evaluating the quality properties. Specially, lime stone powder (LSP) as binder and viscosity agent are used in the combined self compacting concrete because slurry wall of an underground LNG storage tank should be kept stability of quality during concrete working. Replacement ratio of LSP is determined by confined water ratio test and main design factors including fine aggregate ratio ($S_r$), coarse aggregate ratio ($G_v$) and water-cement ratio (W/C) are selected. Also, quality properties including setting time, bleeding content, shortening depth and hydration heat on the optimum mix proportion of the combined self compacting concrete according to cement type are compared and analyzed. As test results, the optimum mix proportion of the combined self compacting concrete according to cement type is as followings. 1) Slag cement type-replacement ratio of LSP 13.5%, $S_r$ 47% and W/C 41%. 2) Belite cement type-replacement ratio of LSP 42.7%, Sr 43% and W/C 51%. But optimum coarse aggregate ratio is 53% regardless of cement types. Also, as test results regarding setting time, bleeding content, shortening depth and hydration heat of the combined self compacting concrete by cement type, belite cement type is most stable in the quality properties and is to apply the actual construction work.

• Journal of Forest and Environmental Science
• /
• v.15 no.1
• /
• pp.77-88
• /
• 1999

This experiment was carried out to compare the cultural characteristics of mycorrizal fungi associated with Pinus species, and to form mycorrhizal association with Pinus thunbergii by artificial inoculation of these fungi. Mycorrhizal fungi tested showed great variations in cultural characteristics. Most fungal isolates was best grown on MP medium, except PDA for Lepista sp.(Ln73/92). Hagem for Rhizopogon rubescens(FRI91017), and FDA for Paxillus sp.(Pa60/92). Optimum temperature for these fungi was $25^{\circ}C$, except $30^{\circ}C$ for Pisolithus tinctorius(FRI91004 and Pt1). The range of pH conditions favorable for these fungal isolates were also variable from weak acidic(pH5) to weak alkalic(pH8). Utilization of the carbon sources for these mycorrhizal fungi was different. Fructose, glucose, and maltose were all utilized well, while xylose was not utilized generally. Mycelial growth on the media supplemented with potassium nitrate was better than those on other media with urea, asparagine, or peptone as a nitrogen source, and the poor growth was observed on the media with urea. Pisolithus tinctorius(Pt1) among 7 mycorrhizal fungi artificially inoculated for the mycorrhizal synthesis on pinus thunbergii seedlings in the test tube containing a mixture of peat moss-vermiculite(2:1, v/v) formed mycorrhizae successfully after 3 months. P. tinctorius formed branched and unbranched roots covered with thick fungal mantle and radiating extemal hyphae. Mycorrhizal root cross-sectioned by hand, stained, and observed by Nomarski interference microscope showed typical characteristics of ectomycorrhizae: fungal mantle on epidermal cells and thick Hartig net hyphae around cortex cells.

• Korean Journal of Weed Science
• /
• v.16 no.4
• /
• pp.327-336
• /
• 1996

This study was conducted to investigate the content of antioxidant and GST activity of the oxyfluorfen-tolerant and -susceptible rice cultivars with barnyardgrass, a typical susceptible weed in accordance by oxyfluorfen treatment. The content of vitamin C was higher in the tolerant rice cultivar than in the susceptible rice cultivar and barnyardgrass. The contents of vitamin E, carotenoid, glutathione(GSH, GSSG, total glutathione) were not different between the tolerant and susceptible plants. In the case of the content of vitamin C due to the treatment of oxyfluorfen, the tolerant rice cultivars, Hawon and Baru decreased less than the susceptible rice cultivars and barnyardgrass. After the treatment of oxyfluorfen the contents of vitamin E and GSH in the tolerant rice cultivars were higher than in the susceptible rice cultivars or barnyardgrass. But in the content of carotenoid was greater in the tolerant rice cultivars than in the susceptible rice cultivars but they didn`t have any difference in comparison with the susceptible barnyardgrass. And there was no difference in the content of GSSG between the tolerant and susceptible plants. When CDNB or oxyfluorfen were used as substrate, the GST activity, was higher in the tolerant rice cultivars than in the susceptible rice cultivars or batnyardgrass. After the treatment of oxyfluorfen the GST activity was not induced in the rice, but was induced in the barnyardgrass. Even after the treatment of acifluorfen, bifenox and oxadiazon the GST activity was not induced in the rice cultivars.

• The Korea Journal of Herbology
• /
• v.23 no.1
• /
• pp.109-116
• /
• 2008

Objectives : This study was performed to investigate the discriminative criteria of 6 kinds of Achyranthis Radix by HPLC/DAD. Methods : 20-hydroxyecdysone is isolated by silica gel column chromatography ($CHCl_3$:MeOH, 7:1-1:1 v/v) and identified by nuclear magnetic resonance, A high-performance liquid chromatographic method with diode array detection was used to identify 20-hydroxyecdysone in A. japonica. The analysis was performed using $C_{18}$ column with isocratic elution consisted of 18% acetonitrile and 82% water and the detection was carried out by DAD at 254 nm. 6 kinds of Achyranthis Radix from different locations were extracted in MeOH. Each extracts was analyzed by HPLC in same condition as used in analysis of 20-hydroxyecdysone. The identities of each extracts were determined by comparing the retention time and UV spectrum with that of reference compound. Results : 1. A. japonica and A. bidentata showed the similar patterns of HPLC chromatogram and 20-hydroxycedysone was present in both of them because the peaks having the same retention time and UV spectrum as 20-hydroxyecdysone were shown in the HPLC chromatograms of A. japonica and A. bidentata 2. Cyathula officinalis and C. capitata showed the similar patterns of HPLC chromatogram. The peak having the same retention time and UV spectrum as 20-hydroxyecdysone was shown in the HPLC chromatogram of C. capitata but not shown in the HPLC chromatogram of C. officinalis. 3. Two species of medicinal drugs from Sacheon province showed similar patterns of HPLC chromatogram. Achyranthis Radix from Sacheon(wild) did not have 20-hydroxycedysone but Achyranthis Radix from Sacheon(cultivated) showed the peak having the same retention time as 20-hydroxyecdysone but UV spectrum of the peak was different from that of 20-hydroxyecdysone. Conclusions : These results suggested that 20-hydroxyecdysone could be the discriminative criteria for Achyranthis Radix contain 20-hydroxyecdysone though they belong to different genus and species. And the patterns of HPLC chromatogram also could be the discriminative criteria as the different species of Achyranthis Radix belonging to the same genus showed similar patterns of HPLC chromatogram.

• Microbiology and Biotechnology Letters
• /
• v.38 no.2
• /
• pp.144-150
• /
• 2010

This study was aimed to screen bacteria of high alginate-degrading activity, to select the nitrogen source and concentration of NaCl and sodium alginate for the production of alginate-degrading enzyme, and to determine reaction conditions of enzyme. A novel alginate-degrading bacterium was isolated from abalone (Haliotis discus hannai) and named Methylobacterium sp. HJM27 by 16S rDNA sequence analysis. The optimum culture conditions for the production of alginate-degrading enzyme were 1.0% sodium alginate, 0.5% peptone, 0.3% yeast extract, 1.5% NaCl, $25^{\circ}C$ and 48 hours incubation time. The raw enzyme showed the highest activity at $25^{\circ}C$ and pH 9, and produced 1.217 g - reducing sugar per liter in 0.8% (w/v) sodium alginate for 30 minutes. Methylobacterium sp. HJM27 and its alginate-degrading enzyme would be useful for the production of bioenergy and biofunctional oligosaccharides from seaweed.

• KSBB Journal
• /
• v.17 no.3
• /
• pp.255-260
• /
• 2002

1,3-Propanediol as a bifunctional organic compound could be used in polymerization reactions producing polyesters and polyurethanes. Byproduct containing high concentration of glycerol from fat industry was used to produce 1,3-propanediol in lower production cost as well as waste treatment. In this study, various attempts were made to increase 1,3-propanediol production under different conditions using Klebsiella pneumoniae ATCC 15380. The conversion yield and byproduct formation were influenced significantly by the fermentation pH and temperature. The optimal glycerol and nitrogen concentration for 1,3-propanediol production were found to be 25 a/L and 1%(w/v), respectively. The formation of 1,3-propanediol was optimal at pH 6.0 and temperature $35^{\circ}C$. 1,3-Propanediol production from byproduct from 2.5% glycerol was lower than that of 2.5% commercial glycerol and amounted only to 9.84 a/L from byproduct, while to 12.13 a/L from commercial glycerol.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.2
• /
• pp.140-148
• /
• 2002

The primary goal of this study is to determine the distribution characteristics using a scientific echo sounder in the Yellow Sea west of South Korea. The survey was carried out between 33$^{\circ}$00'N~37$^{\circ}$00'N latitude and 124$^{\circ}$00'E~126$^{\circ}$00'E longitude during the months of May and August, 1999 and April, 2000. The ships used in this survey were the R/V Chung-kyeong(G/T 300) and R/V Dong-baek(G/T 1,050) of Yeosu National University. The results obtained are as follows : 1. From the oceanographic data the Yellow Sea were divided into three sea areas which were the western waters of Chejudo, Mokpo and Kunsan. The oceanographic conditions were different in each of these three areas and the western waters of Chejudo were higher about 1~5$^{\circ}C$ more than the western waters of Gunsan. Generally, thermoclines were presented clearly in all three areas, but more so in August than in May according to seasons. 2. The horizontal distribution of S$_{A}$(area backscattering coefficient per unit area) value is that the western sea waters of Chejudo area are higher than that of the western sea waters of Mokpo and Gunsan. 3. The vortical distribution of S$_{A}$ value varies with thermocline that the harder thermocline is, the higher the S$_{A}$ value is. 4. The S$_{A}$ values on the types of biomass distribution are different with frequency. At the 38kHz, the demersal schools have higher values than the pelagic schools. At the 120kHz, the pelagic schools have higher values than the demersal schools.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.375-384
• /
• 2004

Switching phenomenon of a three-waveguide optical coupler was analyzed by using the coupled mode theory, and the coupling-length of the device was calculated by means of the FDM. CPW traveling-wave electrodes were designed by the CMM and SOR simulation techniques so as to satisfy the conditions of phase-velocity and impedance matching. Traveling-wave modulators were fabricated on a z-cut LiNbO$_3$ substrate. Ti was in-diffused in LiNbO$_3$ to make waveguides and Au electrodes were built on the waveguides by the electroplating technique. Insertion loss and switching voltage of the optical modulator were about 4 ㏈ and 15.6V. Network analyzer was used to obtain S parameters and corresponding RF response. From the measurement, parameters of the traveling-wave electrodes were extracted as such Z$_{c}$=39.2 $\Omega$, Neff=2.48, and a0=0.0665/cm((GHz) (1/2)). The measured optical response R(w) was compared with the theoretically estimated and both responses were shown to agree well. The measurement results revealed that the ㏈ bandwidth turned out to be about 13 GHz.