• Korean Journal of Veterinary Research
• /
• v.37 no.2
• /
• pp.321-330
• /
• 1997

Enrofloxacin is one of the second-generation quinolones which have been widely used to treat bacterial infections in various species including chicken, pig, horse and cattle. The objective of the present study was to describe the serum bactericidal activity(SBA) of enrofloxacin, its pharmacokinetic behaviors after intramuscular or intravenous administration to Korean native goats in the dose rate of 5mg/kg b.w. The results obtained through this study were as follows : 1. Sera collected from both sexes of Korean native goats administered 5mg/kg i.v. or i.m. showed potent antibacterial activities up to the 12 hours by way of the serum bactericidal activity. 2. Concentrations of enrofloxacin in the biological samples were measured by high-performance liquid chromatography(HPLC) so as to study pharmacokinetic characteristics. For detection of enrofloxacin, 10% TCA was optimal for protein precipitation and the mobile phase was 0.01M citric acid/methanol/acetonitrile(7/2/1, pH 3.5) with solid phase being the $C_{18}$ reversephase column and detection wavelength being 278nm. The limit of detection of enrofloxacin on HPLC was $0.05{\mu}g/ml$. 3. Pharmacokinetic profile of enrofloxacin administered 5mg/kg i.v. in Korean native goats was best described by two-compartment open model and that administered i.m. the same rate by one-compartment model. There were no sex differences in pharmacokineticl parameters. In conclusion, enrofloxacin showed potent in vivo antibacterial activity and excellent pharmacokinetic properties in Korean native goats, hence it may be used as a potential antibacterial in the veterinary clinical settings.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.93.1-93.1
• /
• 2010

반사방지막은 태양전지 표면에서의 광 반사를 낮춰주며, Si wafer 표면에서의 carrier의 재결합을 줄이는 passivation 역할을 한다. 이를 위한 다양한 물질이 반사방지막으로 사용된다. 단일박막은 passivation 효과가 미미하여 최근 passivation 향상에 도움이 되는 이중구조 반사방지막이 널리 연구되어지고 있다. 하지만 물질이 다양해짐에 따라 공정시간 및 비용이 늘어나고, passivation에 최적화된 물질사용이 필수적으로 요구되는 단점이 있다. 따라서 본 연구에서는 기존에 passivation 효과가 뛰어나다고 알려진 SiNx의 굴절률 가변을 통하여 이중구조를 갖는 박막을 반사방지막으로 이용하여 그 특성을 비교, 분석하였다. SiNx 이중반사방지막은 0.8 Torr~1 Torr의 압력에서 $450^{\circ}C$의 기판온도로 PECVD를 이용하여 증착되었으며 이때의 plasma power는 180mW/$cm^2$으로 고정 하였다. 굴절률 1.9 및 2.3을 갖는 가스 조성비를 이용하여 각 layer의 두께를 20/60nm, 30/50nm, 40/40nm로 가변하였다. 샘플 제작 후 Sun-Voc 측정을 통하여 implied Voc 및 효율을 측정하였다. 단일반사방지막을 사용한 샘플의 경우 608mV의 implied Voc가 측정되었으며, FF는 82.8%, 효율은 17.6%로 측정되었다. 가장 우수한 특성을 나타낸 20/60nm의 두께로 증착된 샘플의 경우 implied Voc는 625mV, FF는 84.1%, 효율은 18.3%로 우수한 결과를 나타내었다. 반사도 측정 결과 단일반사방지막은 2.27%로 높았으나 SiNx 이중구조를 이용한 반사방지막은 1.67%로 낮은 값을 확인 하여 이중구조의 반사방지막이 반사도 저감 및 passivation 효과 향상에 도움이 되는 것을 확인할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.53.1-53.1
• /
• 2010

결정질 실리콘 태양전지의 효율을 향상시키기 위하여 수광면에 서로 다른 도핑농도를 가지는 고농도 도핑영역과 저농도 도핑영역으로 이루어진 emitter를 형성하는 것이 요구되며 이를 selective emitter라 칭한다. Selective emitter를 형성하면 고농도 도핑영역에서 금속전극과 저항 접촉이 잘 형성되기 때문에 직렬 저항이 최소화되고 저농도 도핑영역에서는 전하 재결합의 감소로 인하여 태양전지의 변환효율이 상승하는 이점이 있다. Selective emitter의 형성방법은 이미 다양한 방법이 제안되고 있으나, 본 연구에서는 기존에 제시된 방법과는 다르게 열산화 시 dopant redistribution에 의한 Boron depletion 현상을 이용하여 selective emitter를 형성하는 방법을 제안하였고, 이를 Simulation을 통하여 검증하였다. 초기 emitter 확산 후 junction depth는 0.478um, 면저항은 $104.2{\Omega}/sq.$ 이었으며, nitride masking layer 두께는 0.3um로 설정하였다. $1100^{\circ}C$에서 30분간 습식산화 공정을 거친 후 nitride mask가 있는 부분의 junction depth는 1.48um, 면저항은 $89.1{\Omega}/sq$의 값을 보였고, 산화막이 형성된 부분의 junction depth는 1.16um, 면저항은 $261.8{\Omega}/sq$의 값을 보였다. 위 조건의 구조를 가진 태양전지의 변환 효율은 19.28%의 값을 나타내었고 Voc, Jsc 및 fill factor는 각각 645.08mV, $36.26mA/cm^2$, 82.42%의 값을 보였다. 한편 일반적인 구조로 설정한 태양전지의 변환 효율, Voc, Isc 및 fill factor는 각각 18.73%, 644.86mV, $36.26mA/cm^2$, 80.09%의 값을 보였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.2
• /
• pp.111-116
• /
• 2003

In this paper, a CMOS baseband analog receiver for wireless home network is discussed. It is composed of a Gilbert type mixer, an Elliptic 6th order 1ow pass filter, and a 6-bit A/D converter. The main role of the mixer is generating a mixed analog signal between the 200MHz output signal of CMOS RF stage and the 199MHz local oscillator. After the undesired high frequency component of the mixed signal comes out. Finally, the analog signal is converted into digital code at the 6-bit A/D converter, The proposed receiver is fabricated with 0.25${\mu}{\textrm}{m}$ 1-poly 5-metal CMOS technology, and the chip area is 200${\mu}{\textrm}{m}$ X1400${\mu}{\textrm}{m}$. the receiver consumes 130㎽ at 2.5V power supply.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.2
• /
• pp.89-95
• /
• 1995

The structure of boron ion-implanted pn junctio in the vacancy-doped p-type HgCdTe was investigated with the differential Hall measurement. The as-implanted junction showed the electron concentration as high as 1${\times}10^{18}/cm^{3}$ and the junction depth of 0.6.mu.m. When the HgCdTe junction was heated in oven, the electron concentration near the junction decreased and the junction depth increased as the annealing temperature and time increased. The junction structure after the thermal annealing was n$^{+}$/n$^{-}$/p. For the 200.deg. C 20min annealed sample, the electron mobility was 10$^{4}cm^{2}/V{\cdot}$s near the surface(n$^{+}$), and was larger thatn 10$^{5}cm^{2}/V{\cdot}$s near the junction(n$^{+}$). The junction formation mechanism is conjectured as follows. When HgCdTe is ion-implanted, the ion energy generates crystal defecis and displaced Hg atoms HgCdTe is ion-implanted, the ion energy generates crystal defecis and displaced Hg atoms near the surface. The displaced Hg vacancies diffuse in easily by the thernal treatment and a fill the Hg vacancies in the p-HgCdTe substrate. With the Hg vacancies filled completely, the GfCdTe substrate becomes n-type because of the residual n-type impurity which was added during the wafer growing. Therefore, the n$^{+}$/n$^{-}$/p regions are formed by crystal defects, residual impurities, and Hg vacancies, respectively.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.777-780
• /
• 2005

모바일 오디오 적용을 위한 저전력 ${\Sigma}{\Delta}$ Modulator 에 대한 설계와 layout 을 보였다. 전체 구조는 3 차 단일 피드백 루프이며, 해상도는 16bit 을 갖는다. 샘플링 주파수에 따른 Over-sampling Ratio 는 128(46kHz) 또는 64(96kHz) 가 되도록 하였다. 차동 구조를 사용한 3 차 ${\Sigma}{\Delta}$ modulator 내의 적분기에 사용된 Op-Amp 는 DC-Gain 을 높이기 위해서 Gain-boosting 기법이 적용되었다. ${\Sigma}{\Delta}$ modulator 의 기준 전압은 전류 모드 Band-Gap Reference 회로에서 공급이 되며, PVT(Process, Voltage, Temperature) 변화에 따른 기준 전압의 편차를 보정하기 위하여, binary 3bit 으로 선택하도록 하였다. DAC 에서 사용되는 단위 커패시터의 mismatch 에 의한 성능 감소를 막기 위해, DAC 신호의 경로를 임의적으로 바꿔주는 scrambler 회로를 이용하였다. 4bit Quantizer 내부의 비교기 회로는 고해상도를 갖도록 설계하였고, 16bit thermometer code 에서 4bit binary code 변환시 발생하는 에러를 줄이기 위해 thermometer-to-gray, gray-to-binary 인코딩 방법을 적용하였다. 0.18um CMOS standard logic 공정 내 thick oxide transistor(3.3V supply) 공정을 이용하였다. 입력 전압 범위는 2.2Vp-p,diff. 이며, Typical process, 3.3V supply, 50' C 시뮬레이션 조건에서 2Vpp,diff. 20kHz sine wave 를 입력으로 할 때 SNR 110dB, THD 는 -95dB 이상의 성능을 보였고, 전류 소모는 6.67mA 이다. 또한 전체 layout 크기는 가로 1100um, 세로 840um 이다.

• Journal of Sensor Science and Technology
• /
• v.9 no.2
• /
• pp.113-119
• /
• 2000

In this work, Pd/Pt gate MISFET sensor using Pd membrane was fabricated to detect the hydrogen in DI water. A differential pair-type was used to minimize the intrinsic voltage drift of the MISFET. To avoid hydrogen induced drift of the sensor, the silicon dioxide/silicon nitride double layer was used as the gate insulator of the FET's. In order to eliminate the blister formation on the surface of the hydrogen sensing gate metal, Pd/Pt double metal layer was deposited on the gate insulator. For this type of application sensors need to be isolated from the DI water, and a Pd membrane was used to separate the sensor from the DI water. The output voltage change due to the variation of hydrogen concentration is linear from 100ppm to 500 ppm.

• Biomolecules & Therapeutics
• /
• v.13 no.2
• /
• pp.118-122
• /
• 2005

The objective of the present investigation was to study pharmacokinetics of promethazine in Korean healthy subjects using a validated HPLC method. The HPLC analysis was performed on a Capcell Pak CN column with a mixture of acetonitrile-0.02M potassium dihydrogen phosphate (42:58, v/v, pH 6.0) and the analyte was quantified with UV detection at 251 nm. The calibration curve of the drug was linear over the range of 1-40ng/mL in human serum and the limit of quantification (LOQ) was 1 ng/mL. This analytical method was validated and shown to be specific, accurate, precise and reproducible. This method was applied to pharmacokinetic study of promethazine in Korean healthy volunteers following an oral administration of two 25 mg Himazin tablets (50 mg promethazine ${\cdot}$HCI) after overnight fasting. Serum samples were collected at given intervals over a 36-hour period (12 points) and pharmacokinetic parameters were determined from serum concentration-time profile using WinNonlin program. The estimated $AUC_{0__\infty}$, $AUC_{0_\infty}$, $C_{max}$, $T_{max}$ and $t_{1/2}$ of promethazine obtained from Korean healthy subjects were 103.84 ${\pm}$84.30 ng${\cdot}$hr/mL, 87.94${\pm}$81.02 ng${\cdot}$hr/mL, 13.43${\pm}$10.92 ng/mL, 2.00${\pm}$1.16 hr and 5.88${\pm}$3.47 hr, respectively.

• Journal of Chest Surgery
• /
• v.32 no.11
• /
• pp.1017-1022
• /
• 1999

Background: An increasing number of elderly are referred for open heart surgeries(OHS). These patients are assumed to have significantly increased morbidity and mortality because of compromised functional reserves in their vital organs. We reviewed the results of OHS patients who were 70 years old or older. Material and Method: Thirty six consecutive septuagenarians underwent OHS from 1995 to 1997. Operations were coronary artery bypass grafting(CABG) in 26 including 3 left main surgical angioplasty, valve replacement in 7, MVR+CABG in 2, and ASD closure+TAP in 1. Statistical tests were carried out to compare survivor group with nonsurvivor group in respect to risk factors including NYHA functional class, LVEF, emergent operation, IABP support, CPB/ACC time, ventilator time cardiac index, ICU stay and hospital stay for operative mortality. Result: Operative mortality rate and postoperative complication were 16%(6/36) and 50%(18/36). One-year and 3-year actuarial survival rates were 76%. Nine patients(25%) had major complications including third-degree A-V block(2), respiratory failure(1), stroke(3), renal failure requiring dialysis(3) and postoperative hemorrhage(2). The causes of death were pneumonia(1), bleeding(1), acute renal failure(1), low cardiac output(1), third-degree A-V block(1), and ventricular tachycardia(1). The univariate analysis of mortality shows that NYHA class IV, LVEF<40%, lesser values for C.I, and longer time for ventilatory support were associated with the risk factors(p value=0.03, 0.001, 0.007, and 0.014). The emergent operation, CPB/ACC time, IABP support, ICU stay and hospital stay were not significant. Conclusion: We conclude that cardiac operation can be performed in septuagenarians with acceptable outcomes when done in patients with normal to moderately depressed left ventricular function and adequate functional reserves in their vital organs.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.179-186
• /
• 2007

A simple, sensitive and selective liquid chromatographic/tandem mass spectrometric method (LC-MS/MS) was developed and validated for doxifluridine and 5-fluorouracil (5-FU) quantification in dog heparinized plasma. Sample preparation was based on liquid-liquid extraction using a mixture of isopropanol/ethyl acetate (1/9 v/v) to extract doxifluridine, 5-FU and 5-chlorouracil (5-CU, an internal standard) from plasma. Chromatography was performed on a C-18 analytical column and the retention times were 2.7, 1.5 and 1.7 min for doxifluridine, 5-FU and 5-CU, respectively with shorter analysis time within 5 min than previously reported methods. The ionization was optimized using ESI negative mode and selectivity was achieved by tandem mass spectrometric analysis by multiple reaction monitoring (MRM) using the transformations of m/z 244.8>107.6, 129.0>42.0 and 144.9>42.1 for doxifluridine, 5-FU and 5-CU, respectively. The achieved low limit of quantification was 20.0 ng/mL and the assay exhibited linear range of 20-2000 ng/mL ($R^2>0.99957$ for doxifluridine and $R^2>0.99857$ for 5-FU), using $100{\mu}L$ of plasma. Accuracy and precision of quality control samples for both doxifluridine and 5-FU met KFDA and FDA Guidance criteria of 15% for accuracy with coefficients of variation less than 15%. This method demonstrated adequate sensitivity, specificity, accuracy, precision and stability to support the simultaneous analysis of doxifluridine and 5-FU in dog plasma samples in pharmacokinetic and bioequivalence studies.