• Transactions on Electrical and Electronic Materials
• /
• v.18 no.3
• /
• pp.155-158
• /
• 2017

In this paper, ZnO Thin Film Transistors (TFTs) were fabricated by a sol-gel method using a low-temperature process, and their physical and electrical characteristics were analyzed. To lower the process temperature to $200^{\circ}C$, we used a zinc nitrate hydrate ($Zn(NO_3)_2{\cdot}xH_2O$) precursor. Thermo Gravimetric Analyzer (TGA) analysis showed that the zinc nitrate hydrate precursor solution had 1.5% residual organics, much less than the 6.5% of zinc acetate dihydrate at $200^{\circ}C$. In the sol-gel method, organic materials in the precursor disrupt formation of a high-quality film, and high-temperature annealing is needed to remove the organic residuals, which implies that, by using zinc nitrate hydrate, ZnO devices can be fabricated at a much lower temperature. Using an X-Ray Diffractometer (XRD) and an X-ray Photoelectron Spectrometer (XPS), $200^{\circ}C$ annealed ZnO film with zinc nitrate hydrate (ZnO (N)) was found to have an amorphous phase and much more oxygen vacancy ($V_o$) than Zn-O bonds. Despite no crystallinity, the ZnO (N) had conductance comparable to that of ZnO with zinc acetate dihydrate (ZnO (A)) annealed at $500^{\circ}C$ as in TFTs. These results show that sol-gel could be made a potent process for low-cost and flexible device applications by optimizing the precursors.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.2
• /
• pp.179-186
• /
• 2006

To investigate the production of yogurt added with desalted bamboo shoots, the component analysis was conducted. Desalted bamboo shoots contained 82.59 % of moisture, 4.56 % of protein, 0.52 % of lipid, 0.50 % of ash and 11.72 % of total dietary fiber. The main mineral elements were Ca, P, S, Na, Mg and K. Yogurt base fermented with 0.005 % ABT-5 starter inoculum at $40\;^{\circ}C$ for 13 hr. For the preparation of bamboo shoots yogurt, various sugaring bamboo shoots were added to the yogurt base. Results of sensory evaluation of the yogurt containing bamboo shoots indicated that color, odor, taste, flesh size, flesh amount, mouth feel, and overall acceptability of the 15 %(w/v) bamboo shoots dicing $(5{\times}5{\times}5\;mm)$ showed higher preference than others. When bamboo shoot yogurt was kept at $4\;^{\circ}C$ for 15 days, pH, titratable acidity, viable counts of lactic acid bacteria and Bifidobacterium bifidum of yogurt were not changed.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.3
• /
• pp.275-284
• /
• 1997

Unilateral labyrinthectorny (ULX) causes autonomic symptoms, ocular and postural asymmetries, which disappear over tune in the process of equilibrium recovery known as vestibular compensation. In the present study in order to elucidate mechanisms responsible for the effects of electrical stimulation on vestibular compensation and investigate the relationship between vestibular compensation and c-Fos expression in the medial vestibular nuclei following ULX, we measured spontaneous nystagmus, eye movement induced by sinusoidal rotation and c-Fos expression or to 72 hs after ULX in Sprague-Dawley rats. Experimental animals were divided into two groups: ULX group with ULX only, and electrical stimulation (ES) group with electrical stimulation of $-2{\sim}-5V$, 1.0ms, 100 Hz to the lesioned vestibular system for 4 hs/day. Spontaneous nystagmus following ULX disappeared by 72 hs in ULX group and 36 hs in ES group. In eye movement induced by sinusoidal rotation, normal pattern of eye movement by rotation toward the lesioned side was recovered 24 hs after ULX at rotation of 0.1 Hz and 6 hs after at 0.2 Hz, 0.5 Hz in ULX group. In ES group, the eye movement recovered after 12 hs at 0.1 Hz, 6 hs at 0.2 Hz, and 4 hs at 0.5 Hz. Directional Preponderance which represents the symmetry of bilateral vestibular functions showed significantly early recovery in ES group compared with that of ULX group. Expression or c-Fos immunoreactive cells in the bilateral medial vestibular nuclei was severely asymmetrical till 36 hs in ULX group, and then it became a symmetry and disappeared after 72 hs. However, ES group showed the symmetry of c-Fos expression after 6 hs, which was significantly early recovery in 25 group. All these findings suggest that electrical stimulation ameliorates recovery of vestibuloocular reflex following ULX by the restoration of the balance of the resting activity between bilateral medial vestibular nuclei. In addition, c-Fos expression in the medial vestibular nuclei could be used as a marker of vestibular compensation since c-Fos expression is closely related to the course of recovery following ULX.

• Microbiology and Biotechnology Letters
• /
• v.43 no.2
• /
• pp.134-141
• /
• 2015

An agarolytic marine bacterium (H9) was isolated from the coastal seawater of the West Sea, South Korea. The isolate, H9, was gram-negative and rod-shaped with a smooth surface and polar flagellum. Cells grew at 20-30℃, between pH 5.0 and 9.0, and in ASW-YP (Artificial Sea Water-Yeast extract, Peptone) media containing 1-5% (w/v) NaCl. The G+C content was 41.56 mol%. The predominant isoprenoid quinone in strain H9 was ubiquinone-8. The major fatty acids (>10%) were C_16:1ω7c (34.3%), C_16:0 (23.72%), and C_18:1ω7c (13.64%). Based on 16S rRNA gene sequencing, and biochemical and chemotaxonomic characterization, the strain was designated as Pseudoalteromonas sp. H9 (=KCTC23887). In liquid culture supplemented with 0.2% agar, the cell density and agarase activity reached a maximum level of OD = 4.32 (48 h) and OD = 3.87 (24 h), respectively. The optimum pH and temperature for the extracellular crude agarases of H9 were 7.0 and 40℃, respectively. Thin-layer chromatography analysis of the agarase hydrolysis products revealed that the crude agarases hydrolyze agarose into neoagarotetraose and neoagarohexaose. Therefore, the new agar-degrading strain, H9, can be applicable for the production of valuable neoagarooligosaccharides and for the complete degradation of agar in bio-industries.

• Food Science and Preservation
• /
• v.17 no.2
• /
• pp.230-235
• /
• 2010

We investigated the physicochemical quality characteristics of apple juice upon sterilization using hot water, and under various storage conditions. None of sugar content, acidity, or pH differed significantly among various sterilization conditions but chromaticity was considerably reduced in sterilized juice compared with control material. The chromaticity of non-sterilized juice decreased significantly after sterilization compared with material supplemented with vitamin C (0.1%, w/v). Fungi, yeast, and aerobic bacteria were detected in juice sterilized at $65^{\circ}C$ for 10 or 20 min, but no microorganisms were observed in juice sterilized by other procedures. Vitamin C content affected sterilization temperature to a greater extent than sterilization time. When juice was stored at $4^{\circ}C$ or $37^{\circ}C$ for 3 weeks after application of different sterilization conditions, almost no change in acidity, sugar content, or pH was observed, regardless of sterilization mode or storage period. However, chromaticity decreased with longer storage. Vitamin C levels were reduced by higher sterilization temperatures. However, longer storage periods had the greatest effect on reduction of vitamin C levels, which tended toward lower values regardless of differences in sterilization and storage conditions. In sensory evaluation tests, all of taste, color, and overall preference were highest for juice sterilized at $75^{\circ}C$ for 20 min. The ASC value was low at a storage temperature of $4^{\circ}C$ and at high sterilization temperatures, and a long storage period was associated with a greater ASC value. Thus, the quality of apple juice was excellent when juice was hot water-sterilized, with additional vitamin C, at $75^{\circ}C$ for 20 min, followed by storage at $4^{\circ}C$.

• Journal of Surface Science and Engineering
• /
• v.29 no.6
• /
• pp.809-815
• /
• 1996

$Y_2O_3$-based metal-insulator-semiconductor (MIS) structure on p-Si(100) has been studied. Films were prepared by UHV reactive ionized cluster beam deposition (r-ICBD) system. The base pressure of the system was about $1 \times 10^{-9}$ -9/ Torr and the process pressure $2 \times 10^{-5}$ Torr in oxygen ambience. Glancing X-ray diffraction(GXRD) and in-situ reflection high energy electron diffracton(RHEED) analyses were performed to investigate the crystallinity of the films. The results show phase change from amorphous state to crystalline one with increasingqr acceleration voltage and substrate temperature. It is also found that the phase transformation from $Y_2O_3$(111)//Si(100) to $Y_2O_3$(110)//Si(100) in growing directions takes place between $500^{\circ}C$ and $700^{\circ}C$. Especially as acceleration voltage is increased, preferentially oriented crystallinity was increased. Finally under the condition of above substrate temperature $700^{\circ}C$ and acceleration voltage 5kV, the $Y_2O_3$films are found to be grown epitaxially in direction of $Y_2O_3$(1l0)//Si(100) by observation of transmission electron microscope(TEM). Capacitance-voltage and current-voltage measurements were conducted to characterize Al/$Y_2O_3$/Si MIS structure with varying acceleration voltage and substrate temperature. Deposited $Y_2O_3$ films of thickness of nearly 300$\AA$ show that the breakdown field increases to 7~8MV /cm at the same conditon of epitaxial growing. These results also coincide with XPS spectra which indicate better stoichiometric characteristic in the condition of better crystalline one. After oxidation the breakdown field increases to 13MV /cm because the MIS structure contains interface silicon oxide of about 30$\AA$. In this case the dielectric constant of only $Y_2O_3$ layer is found to be $\in$15.6. These results have demonstrated the potential of using yttrium oxide for future VLSI/ULSI gate insulator applications.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.553-558
• /
• 2012

A simple new method was developed for the determination of betaine in Fructus Lycii using hydrophilic interaction liquid chromatography with evaporative light scattering detection (HILIC-ELSD). Good chromatographic separation and reasonable betaine retention was achieved on a Kinetex HILIC column ($2.1{\times}100mm$, $2.6{\mu}m$) packed with fused-core particle. The mobile phase consisted of (A) acetonitrile and (B) 10 mM ammonium formate (pH 3.0)/acetonitrile (90/10, v/v). It was used with gradient elution at a flow rate of 0.7 mL/min. The column temperature was set at $27.5^{\circ}C$ and the injection volume was $10{\mu}L$. The ELSD drift tube temperature was $50^{\circ}C$ and the nebulizing gas (nitrogen) pressure was 3.0 bar. Stachydrine, a zwitterionic compound, was used as an internal standard. Calibration curve over $10-250{\mu}g/mL$ showed good linearity ($R^2$ > 0.9992) and betaine in the 70% methanol extract of Fructus Lycii was well separated from other peaks. Intraand inter-day precision ranged from 1.1 to 3.0% and from 2.4 to 5.3%, respectively, while intra- and inter-day accuracy ranged from 100.0 to 107.0% and from 94.3 to 103.9%, respectively. The limit of quantification (LOQ) was $10{\mu}g/mL$ and the recoveries were in the range of 98.2-102.7%. The developed HILIC-ELSD method was successfully applied to quantitatively determine the amount of betaine in fourteen Fructus Lycii samples from different locations, demonstrating that this method is simple, rapid, and suitable for the quality control of Fructus Lycii.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.764-771
• /
• 1994

Electrochemical synthesis of conductive polypyrrole films was carried out in nucleophilic solvent containing p-toluenesulfonic acid or bezensulfonic acid as supporting electrolyte and dopant. Also characteristics of degradation and improvement of mechanical properties were studied. The conductivity, tensile strength and elongation of the films obtained in dimethyformamide/p-toluenesulfonic acid had the highest value of 10-40S/cm, $25N/mm^2$ and 10%, respectively. The optimum condition of electrochemical synthesis was $2mA/cm^2$ for constant current method and 0.9V for constant potential method containing 0.5M pyrrole and 0.5M p-TSA. The obtained films showed good stability in air and electrode characteristics of secondary battery by reversibility in doping and undoping. The degradation process was 1st order reaction at various temeprature. The activation energy and rate constant of degradation reaction were $1.01JK^{-1}mol^{-1}$ and $3.1{\times}10^{-7}min^{-1}$ respectively at $25^{\circ}C$. For the improvement of mechanical properties, composition of polypyrrole films with various host polymer were investigated and increase of tensile strength and elongation was confirmed.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.55-66
• /
• 1999

The purpose of this study was to evaluate the microleakage of 5 current dentin bonding systems which are composed of 2 multi-bottle systems(Scotchbond Multi-Purpose, All Bond2) and 3 one-bottle systems(Single bond, One-Step, Prime & Bond). In this in vitro study, class V cavities were prepared on buccal and lingual surfaces of sixty extracted human premolars and molars on cementum margin. The experimental teeth were randomly divided into six groups of 10 samples (20 surfaces) each, Group 1 : Scotchbond Multi-Purpose ; Group 2 : All Bond 2 ; Group 3 : Single Bond ; Group 4 : One-Step ; Group 5 : Prime & Bond ; Group 6 : no bonding agent(control). The bonding agent and composite resin were applied for each group following the manufacturer's instructions. After 500 thermocycling between $5^{\circ}C$ and $55^{\circ}C$, the 60 teeth were placed in 2% Methylene blue dye for 24 hours, then rinsed with tab water. The specimen were embedded in clear resin, then sectioned buccolingually through the center of restoration with a low speed diamond saw. The dye penetration on each of the specimen were then observed with a stereomicroscope at ${\times}20$. The results of study were statistically analyzed using the Student-Newmann-Keul's Methods and the Mann-Whitney Rank Sum Test. The resin/dentin interfaces were examined under Scanning Electron Microscopy. The results of this study were as follows. 1. None of the dentin bonding systems used in this study showed significant difference in leakage values at both the enamel and the dentin margins (P>0.05). 2. In all groups except the control, leakage value seen at the enamel margin was significantly lower than that seen at the dentin margin (P<0.05). 3. Compared to the control group, all the groups treated with dentin bonding systems showed significantly lower leakage value at both enamel and dentin margins (P<0.05). 4. In the SEM view, gaps were observed in the composite resin / dentin interface in group 6 where no dentin bonding agent was used, and in all the other groups (group 1, 2, 3, 4, 5) composite resin, hybrid layer, and dentin were seen to be closely adhering to each other where there were no leakages. Well-developed resin tags 3~100${\mu}m$ in length infiltrated dentinal tubules past the hybrid layer and a hybrid layer 1~5${\mu}m$ thick had developed between the dentinal surface and the composite resin surface.

• Journal of fish pathology
• /
• v.6 no.1
• /
• pp.1-10
• /
• 1993

Two vibrio sp. strains were isolated from disease catfish(silurus asotus). The present isolates were identified as Vibrio ordalii based on their biological and biochemical characteristics ; they were positive for acid production from glucose, Iactose, maltose, sucrose and salicine, while negative for arabinose, galactose, inocitol and xylose. They are named KL-1 and KL-2, KL-1 and KL-2 strains were similar to physiological characteristics ; growth was observed at pH 5 to 10 and in 0% to 6.0% NaCl. Two strains did not growth at a concentration above 7.0% NaCl and pH10. This bacterium was infected into health catfish hypodermically. Such injection was found to induce haemorrhagic ulcers very similar to those observed in naturally infected fish. At 24h post-infection, the red spot developed around the injection site and grew bigger to from a red sport area. At 120h post-infection, the muscle ncerosis was extended near the ventral fin. The seventy percent lethal dosage was appeared to water temperature at $25^{\circ}C$. Two strains were tested for drug senistiveity by plate method. KL-1 and KL-2 strains were sensitive to GM. K, N, S and SxT, but resistant to CF, L and VA.