• Journal of Radiation Protection and Research
• /
• v.41 no.2
• /
• pp.81-86
• /
• 2016

Background: For positron emission tomography (PET) application, cadmium zinc telluride (CZT) has been investigated by several institutes to replace detectors from a conventional system using photomultipliers or Silicon-photomultipliers (SiPMs). The spatial and energy resolution in using CZT can be superior to current scintillator-based state-of-the-art PET detectors. CZT has been under development for several years at the Korea Atomic Energy Research Institute (KAERI) to provide a high performance gamma ray detection, which needs a single crystallinity, a good uniformity, a high stopping power, and a wide band gap. Materials and Methods: Before applying our own grown CZT detectors in the prototype PET system, we investigated preliminary research with a developed discrete type data acquisition (DAQ) system for coincident events at 128 anode pixels and two common cathodes of two CZT detectors from Redlen. Each detector has a $19.4{\times}19.4{\times}6mm^3$ volume size with a 2.2 mm anode pixel pitch. Discrete amplifiers consist of a preamplifier with a gain of $8mV{\cdot}fC^{-1}$ and noise of 55 equivalent noise charge (ENC), a $CR-RC^4$ shaping amplifier with a $5{\mu}s$ peak time, and an analog-to-digital converter (ADC) driver. The DAQ system has 65 mega-sample per second flash ADC, a self and external trigger, and a USB 3.0 interface. Results and Discussion: Characteristics such as the current-to-voltage curve, energy resolution, and electron mobility life-time products for CZT detectors are investigated. In addition, preliminary results of gamma ray imaging using 511 keV of a $^{22}Na$ gamma ray source were obtained. Conclusion: In this study, the DAQ system with a CZT radiation sensor was successfully developed and a PET image was acquired by two sets of the developed DAQ system.

• Journal of the Korean Ceramic Society
• /
• v.44 no.12
• /
• pp.655-659
• /
• 2007

Zirconia polycrystals co-doped with x mol% CaO and (10-x) mol% $Y_2O_3$ were prepared by solid state reaction method. The compositions were chosen for nominally the same oxygen vacancy concentration of 5 mol%. X-ray diffraction patterns indicated the formation of cubic zirconia by heat treatment at $1600^{\circ}C$. Impedance spectroscopy was applied to deconvolute the bulk and grain boundary response. Electrical conductivity was measured using the complex impedance technique from 516 to 874 K in air. Maximum conductivity was exhibited by the composition with equal amounts of CaO and $Y_2O_3$, which may be ascribed to the smaller degree of defect-interactions in that composition due to the competition of different ordering schemes between the two systems. When compared to the composition containing $Y_2O_3$ only, co-doping of CaO increases the grain boundary resistance considerably. The activation energy of grain and grain boundary conductivity was 1.1 eV and 1.2 eV, respectively, with no appreciable dependence on dopant compositions.

• Journal of the Korean Ceramic Society
• /
• v.38 no.2
• /
• pp.143-151
• /
• 2001

Ca/LiCl-KCl/CaCrO$_4$열 전지계의 양극재료로서 BCT(Body-Centered Tetragonal) 결정구조를 갖는 CaCrO$_4$분말을 GNP로 합성하고, SEM, TEM, XRD를 이용하여 그 미세구조를 분석하였다. GNP 공정에 의한 CaCrO$_4$분말은 단일상으로 0.5$mu extrm{m}$ 이하의 입자 크기를 가지며 균일하게 분포한 반면, 기존의 분말 혼합법은 높은 하수 온도 및 장시간의 하소 조건을 필요하므로 미세한 분말 합성이 어렵고 pellet 형태로 만들었을 때 GNP 분말에 비해 비표면적이 현저하게 작기 때문에 전극 재료로써 유리하지 못하다. Ca/LiCl-KCl/CaCrO$_4$계의 전기 화학적인 특성을 평가해본 결과 전지셀을 Ca/DEB(LiCl-KCl+CaCrO$_4$+SiO$_2$)와 같은 DEB 형태로 만들었을 때 $600^{\circ}C$의 온도에서 2.0 V이상 (<100 mA/㎤)의 안정한 전압이 5분 이상 유지되었다. 그러나 3층 전극 셀(Ca/LiCl/KCl/ CaCrO$_4$)에서는 동일한 온도에서 2.0 V이상 (<100 mA/㎤)의 전압이 7분 이상 유지되었으나 불안정한 전압 변동 및 낮은 peak voltage로 인해 DEB 셀의 전지 특성이 더 우수한 것으로 생각된다. 양극 재료의 제조 방법의 관점에서 볼 때, 동일한 DEB(Depolarizer : Electrolyte : Binder=25 : 70 : 5 wt%) 조성의 셀 구성시, GNP 분말은 분말 혼합법에 의한 분말보다 반응 표면적이 훨씬 크기 때문에 GNP 양극 활 물질의 DEB 셀에서의 전지 수명이 더 길었다.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.5
• /
• pp.261-264
• /
• 2017

$Ni_{0.79}Co_{0.15-x}Cu_xMn_{2.06}O_4$ ($0{\leq}x{\leq}0.09$) thick films were fabricated using the conventional solid-state reaction method and screen-printing method. Structural and electrical properties of specimens based on the amount of Cu were observed in order to investigate their applicability in the infrared detector. All specimens showed a single spinel phase with a homogeneous cubic structure. As the amount of Cu increased, the average grain size increased and was found to be approximately $5.01{\mu}m$ for the $Ni_{0.79}Co_{0.06}Cu_{0.09}Mn_{2.06}O_4$ specimen. The thickness of all specimens was approximately $55{\sim}56{\mu}m$. As Cu content increased, the resistivity and TCR properties at room temperature decreased, and these values for the $Ni_{0.79}Co_{0.06}Cu_{0.09}Mn_{2.06}O_4$ specimen were $502{\Omega}-cm$ and $-3.32%/^{\circ}C$, respectively. The responsivity and noise properties decreased with an increase in Cu content, with the specimen with a Cu content of x=0.09 showing 0.0183 V/W and $5.21{\times}10^{-5}V$, respectively.

• Journal of Oral Medicine and Pain
• /
• v.21 no.2
• /
• pp.331-349
• /
• 1996

Cytochrome P45O is an oxidase involved in oxidation of alcohol and is known to be an activator of carcinogen. The present study was performed to study the effect of alcohol and cold stress on the expression of Cytochrome P450 IIEl (CYPIIE1) In the liver and salivary glands in rats by an immunoblot analysis. Sixteen rats were divided into 4 groups; 1)rats belonging to group I were allowed to take 15%(v/v) ethyl alcohol as a drink ad libitum: 2)rats of group II were bathed in cold water for 30 sec twice a day (during the one-week experiment); 3)rats comprising group III were received alcohol and cold stress as described above; 4)rats of group IV were selected as a control. The rat were sacrificed at the end of the one-week experiment. The livers and parotid and submandibular salivary glands were removed and stored at -2$0^{\circ}C$ until use. The stored organs were homogenized for 10 sec and the supernatants were obtained by centrifugation. The proteins of the supernatants were separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and subjected to Western blotting. The blotted membranes were incubated with polyclonal antibodies to CYPIIEI . The obtained results were as follows : 1. The expression of CYPIIEl was apparently negative in the liver and salivary glands of group IV, wheras its expression was marked in the experiment groups I, II. and III. 2. No difference in the expression of CYPIIEl in the liver and salivary glands was observed between the experiment groups I, II, and III. 3. Among the experiment groups, the expression of CYPIIE1 in the liver was much greater than in the salivary glands. The expression of CYPIIE1 in the submandibular gland was weakly positive but was greater than in the carotid gland.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.340-343
• /
• 2002

We report here our recent progress in the development and commercialization of polyfluorenes emitting red, green and blue (ROB) colors as materials for light emitting diodes (LEDs). Our patented version of the Suzuki coupling process has been used to synthesize a variety of fluorenebased homopolymers and copolymers emitting colors across the entire visible spectrum. The optical and electronic properties of the polymers are tailored through selective incorporation of different aromatic units into the polyfluorene backbone. Our latest green emitter, reported herein, provides very efficient devices with a low turn-on voltage of 2.25 V, a peak efficiency of 10.5 Cd/A at 6,600 Cd/$m^2$ at 4.85 V. These devices maintain an efficiency of greater than 10 Cd/A up to 50,000 Cd/$m^2$ and demonstrate very good stability as exemplified by a device half-life of greater than 1,500 hours starting from 1,100 Cd/$m^2$. Considerable progress has also been made with red and blue emitters and will be the subject of this presentation.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.5
• /
• pp.291-296
• /
• 2010

This study was to investigate the effect of baicalein, an antioxidant, on the bioavailability of nicardipine after orally or intravenously administered nicardipine in rats. Nicardipine was administered orally (12 mg/kg) or intravenously (4 mg/kg) with or without orally administered baicalein (0.4, 2 or 10 mg/kg) to rats. In the inhibitory effect of baicalein on CYP3A4 activity, baicalein inhibited CYP3A4 activity with $IC_{50}$ values of 9.2 ${\mu}M$. The cell-based P-gp activity test using rhodamine-123 also showed that baicalein (30-10 ${\mu}M$, p<0.01) significantly inhibited P-gp activity. Compared with the control group (given nicardipine alone), the area under the plasma concentration-time curve (AUC) was significantly (2 mg/kg, P<0.05; 10 mg/kg, P<0.01) increased by 25.9-60.0%, and the peak concentration ($C_{max}$) was significantly (10 mg/kg, P<0.01) increased by 40.0% in the presence of baicalein after orally administration of nicardipine. Consequently, the relative bioavailability (R.B.) of nicardipine was increased by 1.26- to 1.60-fold and the absolute bioavailability (A.B.) was significantly (2 mg/kg, P<0.05; 10 mg/kg, P<0.01) increased by 26.0-59.9%. Compared to the i.v. control, baicalein did not significantly change pharmacokinetic parameters of nicardipine in i.v. administration. Accordingly, the enhanced oral bioavailability of nicardipine might be mainly due to increased intestinal absorption caused by P-gp inhibition rather than to reduced elimination of nicardipine by baicalein. The increase in the oral bioavailability might be mainly attributed to enhanced absorption in the small intestine via the inhibition of P-gp and reduced first-pass metabolism of nicardipine via the inhibition of the CYP3A subfamily in the small intestine and/or in the liver by baicalein. Based on these results, nicardipine dosage should be adjusted when given concomitantly with baicalein.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.2
• /
• pp.59-65
• /
• 2006

Fluoroquinolones are the most common group of antibacterial agents currently used in the Korean aquaculture industry, and use of these agents has been increasing steadily. High performance liquid chromatography (HPLC) with fluorescence detection was used for the simultaneous determination of five fluoroquinolones in fish and shellfish: ofloxacin (OFL), pefloxacin (PEF), norfloxacin (NOR), ciprofloxacin (CIP), and enrofloxacin (ENRO). Fish and shellfish muscle was homogenized, and protein, lipid, and low molecular weight pigments were then excluded from the homogenate. The final eluates were analyzed by HPLC equipped with a Shiseido UG-120 type C18 reverse-phase column ($4.6{\times}250 mm$, $5{\mu}m$) and a fluorescence detector (excitation at 280 nm, emission at 450 nm). The mobile phase was 0.1 M phosphoric acid and acetonitrile solution (91:9, v/v) and tetrahydrofuran (THF) was added to it at a rate of 5 mL per a liter of the mobile phase. Adequate chromatography separation was obtained using the above method. Average recoveries of fortified samples at levels from 0.05 to 0.5 mg/kg were $72.3{\pm}2.5-84.5{\pm}1.2%$ for OFL, $82.7{\pm}3.3- 109.3{\pm}7.5%$ for NOR, $85.3{\pm}6.6-116.0{\pm}7.9%$ for PEF, $76.0{\pm}4.3-109.3{\pm}12.4%$ for CIP, and $78.7{\pm}5.9-100.0{\pm}9.8%$ for ENRO. The limit of detection of OFL was $5{\mu}g/L$, the others were $1{\mu}g/L$. We concluded that the new analytical method was suitable for the determination of fluoroquinolones in fish and shellfish.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.171-171
• /
• 2000

차세대 반도체 제조에서 Design rule 이 점점 더 shrink 됨에 따라 shallow junction 분석의 중요성이 강조되고 있다. 이러한 shallow junction에 대한 분석방법중의 하나인 SIMS 분석에 있어서 depth resolution을 향상시키는 것이 중요하며, 일차이온의 에너지를 낮추어 줌으로써 이러한 효과를 달성할 수 있다. 그러나 최근의 연구에 따르면 O2+를 이용한 low energy SIMS 분석 시에 non-zero incidence angle로 분석할 경우 surface roughness가 발생한다는 사실이 보고되었으며, surface roughness를 줄이고 분석 초기의 transient region을 줄이기 위한 방법으로 oxygen flooding을 사용하는 경우 특정 각도에서 surface roughness가 여전히 존재할 뿐 아니라 분석 초기영역에서의 sputter rate이 변화하는 문제가 있음이 보고된바 있다. 본 연구에서는 2keV O2+ 일차이온을 이용하여 oxygen flooding 하에서 기존 조건인 60도 incidence로 분석하는 방법의 문제점을 파악하고 incidence angle을 45도로 바꾸어 분석하는 방법을 검토하였다. 그 결과 기존의 분석조건에서는 분석도중 표면부근에서 sputter rate이 변화하고 surface roughness가 증가하는 것을 확인하였고, 그로 인하여 oxygen flooding을 하지 않은 경우와 많은 차이가 발생하는 것을 발견하였다. Incidence angle을 45도로 바꾼 결과 이러한 문제가 해결되는 것을 확인하였으며, 특히 GaAs $\delta$layer 분석을 통하여 이 분석조건이 기존의 분석조건에 비하여 획기적으로 향상되는 것을 확인 할 수 있었다. 또한 여러 가지 shallow junction 분석을 통하여 이 분석방법이 상당히 신뢰성이 있음을 알 수 있었다. 그러나 여전히 oxygen flooding을 하지 않은 경우에 비하여 다소간의 차이가 있는 것이 발견되었는데, 이는 주로 표면에 잔존하는 산화막에 의한 효과와 oxygen flooding에서 보다 더 depth resolution이 좋음으로 인하여 발생하는 것으로 추정되었으며 그 밖에 다른 가능성도 제기되었다. 따라서 이 방법은 표면 산화막이 거의 없는 시료에 대하여 적용한다면 oxygen flooding을 하지 않은 경웨 비하여 transient region이 거의 없고 junction depth를 보다 신뢰성 있게 측정할 수 잇는 장점이 있는 것으로 판단되었다. As, P의 저 에너지이온 주입시료에 대해 이 분석방법을 적용할 경우 C+s 분석법에 비하여 depth resolution을 비교적 쉽게 향상시킬 수 있었고, oxygen follding을 쓰지 않은 경우에 비해서는 검출한도를 약 100배 정도 향상시킬 수 있었다. 그러나 2.5keV Cs+ 분석법에 비하면 아직 depth resolution이 불충분하여 실제로 shallow As 분석에 적용하기에는 다소 문제점이 있었다.

• Current Photovoltaic Research
• /
• v.3 no.3
• /
• pp.75-79
• /
• 2015

Recently, $Cu_2ZnSn(S_xSe_{1-x})_4$ (CZTSSe) has been received a tremendous attraction as light absorber material in thin film solar cells (TFSCs), because of its earth abundance, inexpensive and non-toxic constituents and versatile material characteristics. Kesterite CZTSSe thin films were synthesized by sulfo-selenization of sputtered Cu/Sn/Zn stacked metallic precursors. The sulfo-selenization of Cu/Sn/Zn stacked metallic precursor thin films has been carried out in a graphite box using rapid thermal annealing (RTA) technique. Annealing process was done under sulfur and selenium vapor pressure using Ar gas at $520^{\circ}C$ for 10 min. The effect of tuning Se/(S+Se) precursor composition ratio on the properties of CZTSSe films has been investigated. The XRD, Raman, FE-SEM and XRF results indicate that the properties of sulfo-selenized CZTSSe thin films strongly depends on the Se/(S+Se) composition ratio. In particular, the CZTSSe TFSCs with Se/(S+Se) = 0.37 exhibits the best power conversion efficiency of 4.83% with $V_{oc}$ of 467 mV, $J_{sc}$ of $18.962mA/cm^2$ and FF of 54%. The systematic changes observed with increasing Se/(S+Se) ratio have been discussed in detail.