• Journal of Microbiology and Biotechnology
• /
• v.29 no.3
• /
• pp.410-418
• /
• 2019

To investigate a novel ${\beta}$-glucosidase from Bifidobacterium breve ATCC 15700 (BbBgl) to produce compound K (CK) via ginsenoside $F_2$ by highly selective and efficient hydrolysis of the C-3 glycoside from ginsenoside Rd, the BbBgl gene was cloned and expressed in E. coli BL21. The recombinant BbBgl was purified by Ni-NTA magnetic beads to obtain an enzyme with specific activity of 37 U/mg protein using pNP-Glc as substrate. The enzyme activity was optimized at pH 5.0, $35^{\circ}C$, 2 or 6 U/ml, and its activity was enhanced by $Mn^{2+}$ significantly. Under the optimal conditions, the half-life of the BbBgl is 180 h, much longer than the characterized ${\beta}$-glycosidases, and the $K_m$ and $V_{max}$ values are 2.7 mM and $39.8{\mu}mol/mg/min$ for ginsenoside Rd. Moreover, the enzyme exhibits strong tolerance against high substrate concentration (up to 40 g/l ginsenoside Rd) with a molar biotransformation rate of 96% within 12 h. The good enzymatic properties and gram-scale conversion capacity of BbBgl provide an attractive method for large-scale production of rare ginsenoside CK using a single enzyme or a combination of enzymes.

• Membrane Journal
• /
• v.10 no.2
• /
• pp.83-91
• /
• 2000

In order to improve functional properties, enzymatic hydrolysis of FPC (fish protein concentration) was achieved in ultrafiltration membrane reactor (MWCO 5,000). First, insoluble FPC was hydrolyzed by pepsin in batch reactor to decrease the fouling in ultrafiltration membrane reactor, and second hydrolysis was achieved by pronase E in ultrafiltration membrane reactor The optimum operating conditions in batch reactor using pepsin were at temperature 45$^{\circ}C$, pH 2.0 and the ratio of substrate to pepsin, 150 (w/w) After operating for 5hrs under optimum conditions, 89％ of total amount of initial FPC was hydrolyzed. The rate constants, $K_{m}$ and V$_{max}$, were 1.25％ and 0.89 mg/$m\ell$/min, respectively, and substrate inhibition was occured above 1.5％. The ultrafiltration membrane reactor was operated with recycling rate of 474 $m\ell$/min and transmembrane pressure of 15 psi. The permeate flux was increased by temperature, transmembrane pressure, but the permeate flux was fixed by pH. The optimum ratio of substrate to pronase E was 200(w/w) and the productivity of ultrafiltration membarane reactor was 702 mg/mg -enzyme, that of batch reactor was 51mg/mg-enzyme. Molecular weight distributions tot first and second hydrolysates were from 2,500 Da to 20,000 Da and from 700 Da to 10,000 Da, respectivelyly.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.94-100
• /
• 1999

Mercurous chloride($Hg_2Cl_2$) crystals hold promise for many acousto-optic and opto-electronic applications, which are prepared in closed ampoules by the physical vapor transport(PVT) growth methods. The thermal boundary conditions established by imposing different temperature on sidewalls of the enclosure cause simultaneous horizontal and vertical convectie flow in the PVT processes of$Hg_2Cl_2$ . It is found that for the ratios of horizontal to vertical thermal Rayleigh numbers$Ra_H/Ra{\ge}1.5$, the convective flow structure changes from multicellular to unicellular for the base parametric state of Ra=($2.79{\times}10^4$) , Pr=0.91, Le=1.01, Pe=4.60, Ar=0.2 and$C_V =1.01$. For the $\Delta T^{*}_H$ greater than 0.3, the $$\mid$U$\mid$_{max}$is increased with increasing $\Delta$ T^{*}_H$ and decreasing the aspect ratio. For the aspect ratios ranging from 0.1 to 1.0, there is a direct and linear relationship between $$\mid$U$\mid$_{max}$ and $\sqrt{{\Delta}T^_H\;^{\ast}}$.A decrease in the aspect ratio destabilizes the convective flow and results in an increase of the magnitude of convection in the crystal growth reactor. The vertical gradient tends to destabilize the convective flow which leads to oscillations, whereas the horizontal gradient stabilizes the convection.

• Journal of the Korean Ceramic Society
• /
• v.41 no.8
• /
• pp.623-627
• /
• 2004

Phase formation and electrical conduction behavior of Ba-doped LaBaGa $O_4$ layered perovskite were studied. Orthorhombic single phase of $K_2$Ni $F_4$-type structure was observed for the composition range of 0$\leq$x$\leq$0.2 in the La$\_$1＋x/Ba$\_$1＋x/Ga $O_4$$\_$4-$\delta$/ system by X-ray analysis. In the dry atmosphere, La$\_$0.8/Ba$\_$1.2/Ga$\_$3.9/ exhibited mixed conduction of oxygen ion and hole (p-type) at high p( $O_2$). However, in water vapor containing atmosphere, it showed proton conduction due to the incorporation of water into oxygen vacancies. As the temperature decreased, the contribution of proton conductivity to the total conduction increased and proton conduction was dominant below 350$^{\circ}C$. The activation energy for proton conduction was calculated as 0.72 eV.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.110-115
• /
• 2010

Transparent conducting gallium-doped zinc oxide (GZO) thin films which were deposited on Corning glass substrate using an Gun-type rf magnetron sputtering deposition technology. The GZO thin films were fabricated with an GZO ceramic target (Zn : 97[wt%], $Ga_2O_3$ : 3[wt%]). The GZO thin films were deposited by varying the growth conditions such as the substrate temperature, oxygen pressure. Among the GZO thin films fabricated in this study, the one formed at conditions of the substrate temperature of 200[$^{\circ}C$], Ar flow rate of 50[sccm], $O_2$ flow rate of 5[sccm], rf power of 80[W] and working pressure of 5[mtorr] showed the best properties of an electrical resistivity of $2.536{\times}10^{-4}[{\Omega}{\cdot}cm]$, a carrier concentration of $7.746{\times}10^{20}[cm^{-3}]$, and a carrier mobility of 31.77[$cm^2/V{\cdot}S$], which indicates that it could be used as a transparent electrode for thin film transistor and flat panel display applications.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.401-408
• /
• 2017

In preparation of self-repairing polymer-modified waterproofing asphalt-montmorillonite (MMT) composite, silylation-modification characteristics of cation ($Na^+$) exchanged K-10 (Na-MMT-K) using 3-aminopropyltriethoxysilane (APS) were studied and the optimal conditions of its silylation-modification process were proposed by use of the results of XRD analysis on silylation-modified Na-MMT-K (S-Na-MMT-K) under various conditions. According to XRD results, it was confirmed that peaks of Na-MMT-K were simultaneously consistent with those of K-10 and natural or Ca-MMT modified Na-MMT. Similarly, S-Na-MMT-K was observed to have two basal spacings ($d_{001}$), among which the area-ratio of a secondary (001) peak ($2{\theta}=3.9{\sim}4.2^{\circ}$) to a primary (001) peak ($2{\theta}{\sim}8.838^{\circ}$) was suggested to be a criterion to represent a degree of APS silylation-modification. Then, the optimal conditions on APS-stirring period prior to APS-MMT reaction, APS-MMT reaction period, APS concentration and reaction temperature at the highest area-ratio were turned out to be 20 min, 2~3 hr, 7.5 w/v% and $50^{\circ}C$, respectively.

• Korean Journal of Ichthyology
• /
• v.24 no.2
• /
• pp.118-124
• /
• 2012

The present study was conducted to investigate different gene expression profile between treated poMSTNpro and non-treated in rainbow trout and to identify those genes that are specifically or predominantly expressed in treated poMSTNpro by employing annealing control primer (ACP)-based GeneFishing polymerase chain reaction (PCR). We isolated total RNAs in muscle tissues from the treated poMSTNpro fish by immersion bath technique with fish myostatin prodomain (Paralichthys olivaceus, poMSTNpro) for one month and the other was non-treated poMSTNpro, and synthesized cDNA using annealing control primers (ACP, Seegene, Korea). Using 20 different ACPs for PCR, were cloned sequenced, and analyzed identities of 2 differentially expressed genes (DEGs). According to BLAST analysis, sequences of 2 clones significantly matched database entries and confirmed by semi-quantitative RT-PCR. The functional roles of one up-regulated gene, cytochrome P450 mono-oxygenases 2K1v2 (CYP2K1v2), and one down-regulated gene was Profilin-1 were identified. We identified distinctive gene expression profiles in improved rainbow trout growth by treatment with a fish myostatin prodomain using ACP-based GeneFishing.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.62-62
• /
• 2009

석탄화력발전소의 CO2배출량 감소와 고효율, 대용량화로 인해 초초임계압(USC:Ultra Super Critical) 화력발전소의 건설이 증가하고 있다. USC 발전소는 효율향상을 위한 증기온도와 압력의 상승 때문에 보일러 고온고압부에 기존의 소재에 비해 고온강도와 내산화성의 재료물성이 향상된 신소재 적용이 불가피하다. 특히 사용된 신소재 중에서 보일러 본체를 구성하는 수냉벽관(Water wall), 과열기와, 재열기용 튜브 및 후육부인 헤더와 배관재로 기존의 2.25Cr-1Mo강을 개량한 2.25Cr-1.6W계 내열강이 적용되고 있다. 2.25Cr-1.6W강은 SMI와 MHI가 공동개발한 소재로 1995년 튜브제품이, 1999년에 단조, 파이프재, 플레이트제품이 ASME code case로 등재되었고, 2009년 ASME code case 2199-4로 개정되어 사용 중이다. 이 소재는 2.25Cr-1Mo강에 고온강도 개선을 위해 석출강화효과가 있는 V과 Nb을 첨가하였고, 탄화물의 열적안정성과 고용강화효과 증대를 위해 W을 첨가하였다. 그리고 제작성과 용접성 및 재료의 인성 향상을 위해 B첨가와 C함량을 낮추었다. 합금성분의 첨가와 조정에 의해 고온강도는 개선되었지만, 보일러 설치 및 보수를 위한 용접과정에서 용접금속과 CGHAZ(Coarse Grain HAZ)에서 용접균열이 발생하였다. 대부분의 용접균열은 용접결함이나 고온 혹은 저온균열이 아닌 2.25Cr-1.6W계강의 강도 개선을 위해 첨가한 V과 Nb이 용접후열처리 도중 입내에 MX형태의 미세석출로 입내를 강화시킴으로서 발생한 재열균열 민감성 증대에 기인된 것으로 판단된다. 이에 본 연구에서 용접 및 후열처리 과정에서 용접금속과 HAZ에서 발생하는 용접금속의 응력분포를 전산해석을 통해 확인하고 실제 후육파이프 용접부에서 잔류응력을 측정해 비교하였다. 용접부 응력분포는 SYSWELD 프로그램을 사용해 해석을 수행하였고, 발전소 실배관재의 용접부 응력측정은 수평부 측정이 용이하도록 지그를 부착한 Potable 잔류응력측정기를 사용해 Hole Drilling Method(HDM)를 적용하여 잔류응력을 측정하였다. 해석 결과 CGHAZ부위의 잔류응력이 용접금속과 기타 부위에 비해 높은 응력분포를 나타냈으며, 이는 CGHAZ와 용접용융선 부근에서 균열이 발생하는 실제값과 일치하는 결과를 보였다. 실제 배관재 용접부에서 측정한 잔류응력값은 항복응력의 약 50% 이하 응력값을 나타냈다. 배관 구조에 기인한 시스템응력의 영향을 제거하기 위해 배관재 용접부를 중심으로 양끝단을 절단 후 용접부에서 측정한 응력은 항복응력 대비 25%수준의 낮은값을 보였다. 그러나 배관재가 장기간 고온환경에 노출되었고 용접금속 내부의 균열이 발생한 상태에서 측정하였기 때문에 용접잔류응력은 상당부분 해소되어 상대적으로 낮은 응력값이 얻어진 것으로 판단된다.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.1
• /
• pp.74-78
• /
• 2007

A new blue phosphorescent material for organic light emitting diodes (OLEDs), Iridium(III)bis[2-(4-fIuoro-3-benzonitrile)-pyridinato-N,C2'] picolinate (Firpic-CN), was synthesized and studied. We compared characteristics of Firpic-CN and Bis(3,5-Difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium III (FIrpic) which has been used for blue dopant materials frequently. The devices structure were indium tin oxide (ITO) (1000 ${\AA}$)/N,N'-diphenyl-N,N'-(2-napthyl)-(1,1'-phenyl)-4,4'-diamine (NPB) (500 ${\AA}$)/4,4'-N,N'-dicarbazole-biphyenyl (CBP) : FIrpic and FIrpic-CN (X wt%)/4,7-diphenyl-1,10-phenanthroline (BPhen) (300 ${\AA}$)/lithum quinolate (Liq) (20 ${\AA}$)/Al (1000 ${\AA}$). 15 wt% FIrpic-CN doped device exhibits a luminance of $1450\;cd/m^2$ at 12.4 V, luminous efficiency of 1.31 cd/A at $3.58mA/cm^2$, and Commission Internationale d'Eclairage $(CIE_{x,y})$ coordinates of (0.15, 0.12) at 12 V which shows a very deep blue emission. We also measured lifetime of devices and was presented definite difference between devices of FIrpic and FIrpic-CN. Device with FIrpic-CN as a dopant presented lower longevity due to chemical effect of CN ligand.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.21-21
• /
• 2018

본 연구는 북방계 식물에 속하는 두메우드풀[Woodsia ilvensis (L.) R.Br.]의 전엽체 증식 및 포자체 형성을 위한 적정방법을 구명하고자 수행되었다. 식물재료는 경상북도 의성군 일대에서 채취한 후 청주의 일반하우스에 이식하여 재배하였다. 포자 성숙기인 8월에 채종하여 발아시켰으며, 포자로부터 획득한 전엽체를 8주간 계대하면서 실험재료로 사용하였다. 전엽체 300mg을 메스로 다진 후 배지농도 및 종류(Knop, 1/4, 1/2, 1 및 2MS)를 달리하여 8주간 배양하였다. 배양실의 온도는 $25{\pm}1.0^{\circ}C$, 광도는 $30{\pm}1.0{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(16/8h)로 조절되었다. 연구의 결과, 배지구성물질의 농도가 높았던 2MS배지에서 전엽체의 생체중이 12.4g으로 41배 증가하여 가장 높은 증식율을 나타냈다. 또한 배지구성물질의 농도가 적을수록 생체중의 증가폭도 함께 감소하는 경향을 보였다. 포자체 형성에 적합한 토양조건을 확인하고자, 원예상토, 피트모스, 펄라이트 및 마사토의 비율을 달리한 5종류의 혼합토양을 조성하여 사각분($7.5{\times}7.5{\times}7.5cm$)에 충진하였다. 다음으로 전엽체 1g을 핸드블랜더로 10초간 분쇄 후 충진된 사각분 위에 고르게 분주하여 14주간 재배하였다. 재배환경은 온도 $25{\pm}1.0^{\circ}C$, 광도 $43{\pm}2.0{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$(16/8h) 및 습도 $72{\pm}2.0%$로 조절되었다. 지베렐린 수용액이 포자체 형성에 미치는 영향을 조사하고자, 선행연구에서 선발된 토양조건을 기준으로 침지농도(0, 50, 100, $200mg{\cdot}L^{-1}$)를 조절하여 1시간 침지 후 상기와 동일한 방법으로 재배하였다. 연구의 결과, 원예상토와 펄라이트 또는 마사토를 2:1(v:v)로 혼용한 토양에서 사각분 당 109.5, 128.8개의 포자체가 형성되었다. 한편, 피트모스가 첨가된 처리는 포자체의 형성이 억제되는 경향을 나타냈다. 지베렐린 50과 $100mg{\cdot}L^{-1}$ 수용액에 침지한 처리에서 무처리에 비해 많은 사각분 당 각 177.0, 181.7개의 포자체가 형성되었으며, 생육도 양호하였다.