• Archives of Pharmacal Research
• /
• v.12 no.4
• /
• pp.282-288
• /
• 1989

This study was investigated the effects of imipramine (IMI) and electroconvulsive shock (ECS), which are used as antidepressant therapy, on the central $\beta_1$or $\beta_2$ adrenergic receptor in anesthetized rats. The resting blood pressure and heart rate decreased in reserpinized group (5 mg/kg i. p., 24 hr before), but not in order 4 groups i. e. acute IMI (20 mg/kg i. p.. 3-5 hr before), chronic IMI (Same dose, twice a day for 14 days), siggle ECS (sinusoidal 20 Hz, 120 V for 2 sec) and repeated ECS (same condition, daily for 12 days). The increase of heart rate and hypotension evoked by 1 or 3 $\mu$g intracerebroventricular (i. c. v.) administration of (+) dobutamine, $\beta_2$-agonist, 1 or 3 $\mu$g i. c. v. was significantly attenuated in repeated ECS or reserpine treatment. And, the diminuation of pulse pressure of salbutamol also reduced by repeated ECS. These results suggest that IMI or ECS result in attenuation on tachycardia by (+) dobutamine or on hypotension by salbutamol, presumably by which the central $\beta_1$ or $\beta_2$receptor sensitivity may be suppressed, repectively.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.4
• /
• pp.283-294
• /
• 2023

Chemical characterization of vinegars obtained from Durian wood (Durio sp.) and their termicidal activity against Coptotermes curvignathus and antifungal activity against Schizophyllum commune were evaluated. The process of pyrolysis produced wood vinegars at three distinct temperature: 350℃, 400℃, and 450℃. To determine their effectiveness against fungal growth, the vinegars were tested using a Petri dish with 1.0%, 2.0%, 3.0%, and 4.0% (v/v) against S. commune. In the experiment, termicidal activities were evaluated using a no-choice test for C. curvignathus with 3.0%, 6.0%, 9.0%, and 12.0% (v/v). The wood vinegar exhibited antitermitic activity to C. curvignathus workers in the no-choice experiment; For vinegar produced at 450℃, a 6% concentration was required to achieve 100% mortality against C. curvignathus. In addition, a 12% vinegar produced at 450℃ resulted in the lowest mass loss of treated filter paper, which was 20.00%. Furthermore, all the wood vinegars exhibited antifungal activities against S. commune at concentration of 2.0%. The dominant chemical components of wood vinegar produced at temperature of 350℃, 400℃, and 450℃ were 2-methoxy-phenol, 4-ethyl-2-methoxy-phenol, 4-ethyl-2-methoxy-phenol, 3.5-dimethoxy-4-hydroxytoluene, and creosol.

• Biomedical Science Letters
• /
• v.11 no.2
• /
• pp.165-173
• /
• 2005

A potent demethylating agent, 5-Azacytidine (5-AzaC) has been widely used as in many studies on DNA methylation, regulation of gene expression, and cancer biology. The mechanisms of the demethylating activity were known to be formation of complex between DNA and DNA methyltransferase (MTase), which depletes cellular MTase activity. However, 5-AzaC can also induce hypermethylation of a transgene in a transgenic cell line, G12 cells and it was explained as a result of defense mechanisms to inactivate foreign gene(s) somehow. This finding evoked the question that whether the phenomenon of hypermethylation induced by 5-AzaC is limited to the transgene or it can be occurred in endogenous gene(s). In order to answer the question, mutagenicity test of 5-AzaC and molecular characterization of mutants obtained from the test were performed using an endogenous gene, thymidine kinase (tk) in Chinese hamster V79 cells. When V79 and V79-J3 subclone cells were treated with 1, 2.5 ,5, $10{\mu}M$ of 5-AzaC for 48 hours, their maximum mutant frequencies were revealed as $6\times10^{-3}\;at\;5{\mu}M$(350-fold induction over background) and $8\times10^{-3}\;at\;2.5{\mu}M$ (l,800-fold induction over background) respectively. Since the induction rates were too high to be induced by true mutations, many trifluorothymidine (TFT)-resistant $(TFT^R)$ cells were subjected to Northern blot analysis to check the presence of tk transcripts. Surprisingly, all clones tested possessed the transcripts in a similar level, that implicates the $TFT^R$ phenotype induced by 5-AzaC has not given rise to hypermethylation of the gene in spite of unusually high mutation frequency. In addition, it has shown that the TK activity in the pool of 5-AzaC-induced $TFT^R$ cells has about a half of that in spontaneously-induced $TFT^R$ cells or in non-selected parental V79-J3 cells. This result suggests that the mechanism(s) underlying the TFT-resistance between spontaneously occurred and 5-AzaC-induced cells may be different. These findings have shown that the $TFT^R$ phenotype induced by 5-AzaC has not given rise to hypermethylation of the tk gene, and 5-AzaC may be induced by one or combined pathways among many drug resistance mechanisms. The exact mechanisms for the 5-AzaC-induced $TFT^R$ phenotype remain to elucidate.

• Electrical & Electronic Materials
• /
• v.9 no.2
• /
• pp.152-158
• /
• 1996

Optical absorption and photoconductivity spectra of undoped and Co-doped Cd$_{4}$GeSe$_{6}$ single crystals, grown by the chemical transport reaction using iodine as a transporting agent, were investigated. At 20K, the optical energy gaps of the single crystals are 1.934eV for Cd$_{4}$GeSe$_{6}$ and 1.815eV for Cd$_{4}$GeSe$_{6}$ :Co$^{2+}$. The photoconductivity spectra of these single crystals were closely investigated over the temperature range 20-290K. At 20K, the photoconductivity peaks were located at 1.797eV, 1.347eV for Cd$_{4}$GeSe$_{6}$ and 1.815eV, I,.57eV, 1.46eV and 1.38eV for Cd$_{4}$GeSe$_{6}$ :Co$^{2+}$, respectively.ely.

• Korean Journal of Materials Research
• /
• v.8 no.5
• /
• pp.470-473
• /
• 1998

$As^+$ was ion-implanted onto $CoSi_{2}$ thin films formed by rapidly thermal-annealed Co/Ti bilayers. Then the specimens were drive-in annealed at 500~100$0^{\circ}C$ to form ultra-shallow $n^+$p junction diodes and to measure their 1- V characteristics. When drive-in annealed at 50$0^{\circ}C$ for 280 sec., 50 nm thick ultra-shallow junctions were formed and di¬odes showed the best 1- V characteristics with low leakage current. In particular. the leakage current was 2 orders lower than that of diodes formed by using Co monolayer. It was attributed to uniform $CoSi_{2}$/Si interfaces.

• Advanced Composite Materials
• /
• v.18 no.4
• /
• pp.351-364
• /
• 2009

The thermal stability and elevated temperature mechanical properties of $SiC_P$/Al-11.7Fe-1.3V-1.7Si (Al-11.7Fe-1.3V-1.7Si reinforced with SiC particulates) composites sheets prepared by spray deposition (SD) $\rightarrow$ hot pressing $\rightarrow$ rolling process were investigated. The experimental results showed that the composite possessed high ${\sigma}_b$ (elevated temperature tensile strength), for instance, ${\sigma}_b$ was 315.8 MPa, which was tested at $315^{\circ}C$, meanwhile the figure was 232.6 MPa tested at $400^{\circ}C$, and the elongations were 2.5% and 1.4%, respectively. Furthermore, the composite sheets exhibited excellent thermal stability: the hardness showed no significant decline after annealing at $550^{\circ}C$ for 200 h or at $600^{\circ}C$ for 10 h. The good elevated temperature mechanical properties and excellent thermal stability should mainly be attributed to the formation of spherical ${\alpha}-Al_{12}(Fe,\;V)_3Si$ dispersed phase particulates in the aluminum matrix. Furthermore, the addition of SiC particles into the alloy is another important factor, which the following properties are responsible for. The resultant Si of the reaction between Al matrix and SiC particles diffused into Al matrix can stabilize ${\alpha}-Al_{12}(Fe,\;V)_3Si$ dispersed phase; in addition, the interface (Si layer) improved the wettability of Al/$SiC_P$, hence, elevated the bonding between them. Furthermore, the fine $Al_4C_3$ phase also strengthened the matrix as a dispersion-strengthened phase. Meanwhile, load is transferred from Al matrix to SiC particles, which increased the cooling rate of the melt droplets and improved the solution strengthening and dispersion strengthening.

• Journal of Chest Surgery
• /
• v.25 no.4
• /
• pp.364-382
• /
• 1992

In order to investigate the effect of intracellular cyclic GMP on the calcium channel, whole cell patch clamp technique with internal perfusion method was used in the single ventricular myocytes of the rabbit. Cyclic GMP, cGMP analogues, cAMP, isopernaline and forskolin were perfused into cells and their effects on the calcium current were analysed by applying depolarizing step pulse of 10 mV in amplitude for 200 msec from holding potential of -40 mV. Calcium currents usually activated from -30 mV and then reached a peak at +10 mV. Amplitude of the calcium current was standardized with membrane capacitance, 50 pF. Peak amplitude at +10 mV in control was -0.15 nA/50pF. When 100 mM cAMP was applied from the pipette, peak amplitude of calcium current increased to -0.32 nA and addition of 1 mM isoprenaline further increased its amplitude. In the presence of cGMP it alone also produced an increase of the calcium current to -0.52 nA/50pF and addition of isoprenaline or forskolin increased its magnitude to -[0.55~0.95] nA/50pF. Simultaneous application of cGMP and cAMP increased the calcium current to -0.67 nA/50pF. Among the cGMP analogues, 8-Br-cGMP was the most potent stimulant for the calcium current activation. From the above results it could be concluded tlat cGMP increases the calcium current not through cAMP dependent protein kinase nor cAMP dependent phosphodiesterase pathway, but through independent phosphorylation pathway, possibly cGMP dependent protein kinase pathway.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.67-67
• /
• 2000

CeO2는 cubic 구조의 일종인 CaR2 구조를 가지고 있으며 격자상수가 Si의 격장상수와 매우 비슷하여 Si 기판위에 에피텍셜하게 성장할 수 있는 가능성이 매우 크다. 따라서 SOI(silicon-on-insulator)구조의 실현을 위하여 Si 기판위에 CeO2 박막을 에피텍셜하게 성장시키려는 많은 노력이 있어왔다. 또한 metal-ferroelectric-semiconductor field effect transistor)에서 ferroelectric 박막과 Si 기판사이의 완충층으로 사용된다. 이러한 CeO2의 응용을 위해서는 Si 기판 위에 성장된 CeO2 박막의 방위성 및 CeO2/Si 구조의 전기적 특성을 알아보는 것이 매우 중요하다. 본 연구에서는 Si(100) 기판위에 CeO2(200)방향으로 성장하는 박막과 EcO2(111) 방향으로 성장하는 박막을 rf magnetron sputtering 방법으로 증착하여 각각의 구조적, 전기적 특성을 분석하였다. RCA 방법으로 세정한 P-type Si(100)기판위에 Ce target과 O2를 사용하여 CeO2(200) 및 CeO2(111)박막을 증착하였다. 증착후 RTA(rapid thermal annealing)방법으로 95$0^{\circ}C$, O2 분위기에서 5분간 열처리를 하였다 이렇게 제작된 CeO2 박막의 구조적 특성을 XRD(x-ray diffraction)방법으로 분석하였고, Al/CeO2/Si의 MIS(metal-insulator-semiconductor)구조를 제작하여 C-V (capacitance-voltage), I-V (current-voltage) 특성을 분석하였으며 TEM(transmission electron microscopy)으로 증착된 CeO2막과 Si 기판과의 계면 특성을 연구하였다. C-V특성에 있어서 CeO2(111)/Si은 CeO2(111)의 두께가 증가함에 따라 hysteresis windows가 증가한 방면 CeO2(200)/Si은 hysteresis windows가 아주 작을뿐만 아니라 CeO2(200)의 두께가 증가하더라도 hysteresis windos가 증가하지 않았다. CeO2(111)/Si과 CeO2(200)/Si의 C-V 특성의 차이는 CeO2(111)과 CeO2(200)이 Si 기판에 의해 받은 stress의 차이와 이에 따른 defect형성의 차이에 의한 것으로 사료된다.

• Korean Journal of Crystallography
• /
• v.6 no.2
• /
• pp.63-68
• /
• 1995

The crystal structure of fenothiocarb(S-4-phenoxybutyl dimethylthiocarbamate), C13H19NO2S is monoclinic, space group P21/c, a=9.045(1)Å, b=14.577(2)Å, c=10.727(2)Å, β=103.56(1)°, Z=4, V=1375.20(6)Å3, Dc=1.23g/cm3, λ(Mo-Kα)=0.71069Å, μ=2.3cm-1, F(000)=544, temperature : 293±3K, R=0.049 for 1543 unique observed reflections. The structure was determined by direct method and refined by full-matrix least squares method. The molecules are contacted to the c axis with two fold screw and van der Waales force.

• Transactions of Materials Processing
• /
• v.10 no.4
• /
• pp.347-354
• /
• 2001

Compression tests were carried out to investigate the hot-deformation behavior of Ti-6Al-4V alloy in the temperature range of $915^{\circ}C$ to $1015^{\circ}C$ and the strain rate range of $10^{-3}s^{-i}$ to $10s^{-1}$. Under the given test conditions, the hot-deformation of Ti-6Al-4V alloy was mainly led by dynamic recovery rather than by dynamic recrystallization. The activation energy for the plastic deformation in $\alpha+\beta$ field was about 894 kJ/mol and $\beta$ field was 332kJ/mo1. Processing map for hot working are developed on the basis of the variations of efficiency of power dissipation($\eta$=2m/m＋1) and flow instability criterion using the dynamic material model. The optimum process condition in the ($\alpha＋\beta$) field was obtained at the temperature ranges of $930^{\circ}C$ to $955^{\circ}C$$^{\circ}C$ and a strain rate of $10^{-3}s{-1}$.