• Bulletin of the Korean Chemical Society
• /
• v.15 no.1
• /
• pp.33-36
• /
• 1994

The x values of nonstoichiometric chemical formula, $Tb_4O_{7-{\delta}}\;or\;TbO_{1.5+x}$, have been determined in temperature range from 600$^{\circ}$C to 1000$^{\circ}$C under oxygen partial pressure of 2 ${\times}$ 10$^{-1}$ to 1 ${\times}$ 10$^{-5}$ atm by using quartz microbalance. The x values varied from 0.0478 to 0.1964 in the above conditions. The enthalpy of formation for x' in TbO$_{1.5+(0.25-xo-x')}$, ${\delta}H_f$, was 4.93-3.40 kcal mol$^{-1}$ and the oxygen partial pressure dependence was -1/8.80∼-1/11.8 under these conditions. The electrical conductivity of the $TbO_{1.5+x}$ was measured under the same conditions and the values varied from about 10$^{-3}$ to 10$^{-6}\;{\Omega}^{-1}cm^{-1}$ within semiconductor range. The activation energies for the conduction increase with oxygen partial pressure from 0.83 to 0.89 eV under the above conditions. The l/n values obtained from the oxygen pressure dependence of the conductivity are 1/4.4-1/5.2. The conduction mechanism, defect structure, and other physical properties of the oxides are dicussed with the x values, the electrical conductivity values, and the thermodynamic data.

• Biodesign
• /
• v.5 no.4
• /
• pp.136-140
• /
• 2017

Lam6 is a member of sterol-specific ${\underline{l}ipid$ transfer proteins ${\underline{a}}nchored$ at ${\underline{m}ebrane$ contact sites (LAMs). Lam6 localizes to the ER-mitochondria contact sites by its PH-like domain and the C-terminal transmembrane helix. Here, we purified and crystallized the Lam6 PH-like domain from Saccharomyces cerevisiae. To aid crystallization of the Lam6 PH-like domain, T4 lysozyme was fused to the N-terminus of the Lam6 PH-like domain with a short dipeptide linker, GlySer. The fusion protein was crystallized under the condition of 0.1 M HEPES-HCl pH 7.0, 10% (w/v) PEG 8000, and 0.1 M $Na_3$ Citrate at 293K. X-ray diffraction data of the crystals were collected to $2.4{\AA}$ resolution using synchrotron radiation. The crystals belong to the orthorhombic space group $P2_12_12_1$ with unit cell parameters $a=59.5{\AA}$, $b=60.1{\AA}$, and $c=105.6{\AA}$. The asymmetric unit contains one T4L-Lam6 molecule with a solvent content of 58.7%. The initial attempt to solve the structure by molecular replacement using the T4 lysozyme structure was successful.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.2
• /
• pp.165-173
• /
• 2022

The electrification trend of mobility increases every year due to the development of power semiconductor and battery technology. Accordingly, the development and distribution of fast chargers for electric vehicles (EVs) are in demand. In this study, we propose a design and implementation method of an LLC converter for fast chargers. Two 15 kW LLC converters are configured in parallel to have 30 kW rated output power, and the control algorithm and driving sequence are designed accordingly and verified. In addition, the improved power conversion efficiency is confirmed through zero-voltage switching (ZVS) of the LLC converter and reduction of turn-off loss through snubber capacitors. The implemented 30 kW LLC converters show a wide output voltage range of 200-950 V. Experiments applying various load conditions verify the converter performance.

• Journal of Surface Science and Engineering
• /
• v.32 no.3
• /
• pp.351-355
• /
• 1999

BN films with a high content of cubic phase has been deposited by a variety of techniques. It is well known that c-BN films grow with a unique microstructure consisting of $sp^2$ and $sp^{3-}$ bonded layers. Because of existence of the initially grown $sp^{2-}$ /bonded layer, BN films are not adhesive to the substrates. In this study, post-N$^{+ }$ / implantation was applied to improve the adhesion of the films. A Monte Carlo program TAMIX was used to simulate this modification process. The simulation showed nitrogen concentration profile at $1200\AA$ in depth in case of 50keV -implantation energy. FTIR spectra of the $N^{+}$ implanted specimens demonstrated a strong change of absorption band at 1380 cm$^{ -1 }$The films were also investigated by HRTEM. From these results, it is concluded that the post ion implantation could be an effective technique which improves the adhesion between BN film and substrate.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.1
• /
• pp.55-61
• /
• 1987

A series of laboratory experiments were carried out to find the effects of soil organic matter contents, soil temperature, pH values, kinds and amount of nitrogen fertilizers on the denitrification-$N_2O$ gas evolution-. The results obtained were summarized as follows: 1. Denitrification rate, amount of $N_2O$ gas evolution, was influenced the order of organic matter contents>soil temperature>pH values>kinds of N-fertilizer>levels of N-fertilizer. 2. The highest dentrification rate was observed in organic matter content of 3.0%, pH values at 6.0 with application of $KNO_3$ at levels of 20 mgN/100g soil. 3. For the evolution of I mole $N_2O$ gas, averaged carbon consumption was obtained as 0.5 mole in all these experiment condition. However, the highest carbon consumption rate was obtained in organic matter contents for 1.0% with application of $(NH_4)_2SO_4$ at levels of 10 mgN/100g soil (1.06 mole) while lowest carbon consumption rate was obtained in organic matter contents for 3.0% with application of $KNO_3$ at levels of 20 mgN/100g soil (0.13 mole). 4. According to Michaelis-Menten's equation, the V/2 values for evolution of $N_2O$ gas was estimated by progress curve. The results obtained was as 550 ug for $(NH_2)_2CO$ and 1100 ug $N_2O/100g$ soil by application of $KNO_3$ in organic matter contents of 1.0% soil. On the other hand, when the application $(NH_4)_2SO_4$ the V/2 values of $N_2O$ gas was obtained as the amount of 490 ug/100g soil while V/2 values of $N_2O$ gas by application of $KNO_3$ was on the linear line in soil organic matter contents of 3.0%.

• Korean Journal of Microbiology
• /
• v.47 no.1
• /
• pp.92-96
• /
• 2011

Rhodococcus sp. strain DK17 possesses three megaplasmids (380 kb pDK1, 330 kb pDK2, and 750 kb pDK3). The alkylbenzene-degrading genes (akbABCDEF) are present on pDK2 while the phthalate operons which are duplicated are present on both pDK2 (ophA'B'C'R') and pDK3 (ophABCR). DK17 with an optimal temperature of $30^{\circ}C$ showed no growth at $37^{\circ}C$. When transferred to $30^{\circ}C$, however, the $37^{\circ}C$ culture began to grow immediately, indicating that $37^{\circ}C$ is not lethal but stressful for DK17 growth. In addition, when exposed to $37^{\circ}C$ even for a short time, a part of DK17 cells lost the ability to degrade o-xylene (a model compound of alkylbenzenes). When two hundred colonies were randomly selected for colony PCR for pDK2-specific akbC, ophC', or pDK3-specific ophC, a total of 29 colonies were found to have lost at least one of the three genes. PFGE analysis clearly showed that all the mutants have different megaplasmid profiles from that of DK17 wild type, which are divided into five different cases: Type I (10 mutants, pDK2 loss and acquisition of a new ~700 kb plasmid), Type II (9 mutants, pDK2 loss), Type III (8 mutants, pDK3 loss and acquisition of a new ~400 kb plasmid), Type IV (1 mutant, pDK3 loss), and Type V (1 mutant, pDK2 and pDK3 loss and acquisition of the ~400 kb and ~700 kb plasmids). The above results showing that growth temperature changes can induce physical changes in bacterial genomes suggest that environmental changes in habitats including temperature fluctuations affect significantly the evolution of bacteria.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.827-833
• /
• 2013

In this study we investigated physicochemical properties of Zanthoxylum schinifolium seeds oil base extracts. Supercritical fluid extraction (SFE), roast pressure (RPM) and steam pressure (SPM) method were used for oil base extracts. The pressure and temperature conditions of SFE method were $70{\sim}80kgf/cm^2$ and below $30^{\circ}C$, respectively, by newly designed SFE-$CO_2$ system. The yield of extraction was 38.5% at the SFE method and others were 30% in each. Refractive index of oil base extracts, there was also no difference between them as 1.470~1.473. At the SFE method, viscosity observed higher value better than two method that showed as 181.88~209.93 according to the extraction time. Three oil base extracts showed difference in color which was low in b value at SFE, especially. The result of acid value at RPM that was lower as 0.93 mg/g than 2.36~2.64 mg/g of SFE method. Saponification value ranged $182.96{\sim}196.57mg{\cdot}KOH/g$ in three extraction method. At SPM, TBA value showed as 158.96 mg/kg, but in the SFE method ranged higher value as 201.30~347.14 mg/kg. Fatty acids analysed with 18 varieties in all oil base extracts and the composition of saturated/unsaturated fatty acids was 17:83(v/v) at SEF. Especially, ${\omega}$-3,6,9 fatty acids observed at SFE and SPM, but did not appeared at RPM. Fatty acid of ${\omega}$-6,9 detected in all cases.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.159-159
• /
• 2017

스마트 시설환경은 대표적으로 원예, 축산 분야 등 여러 형태의 농업현장에 정보 통신 및 데이터 분석 기술을 도입하고 있는 시설화된 생산 환경이라 할 수 있다. 근래에 하드웨어적으로 급증한 스마트 시설환경에서 생산되는 방대한 생육/환경 데이터를 올바르고 적합하게 사용하기 위해서는 일반 산업 현장과는 차별화 된 분석기법이 요구된다고 할 수 있다. 소프트웨어 공학 분야에서 연구된 빅데이터 처리 기술을 기계적으로 농업 분야의 빅데이터에 적용하기에는 한계가 있을 수 있다. 시설환경 내/외부의 다양한 환경 변수는 시계열 데이터의 난해성, 비가역성, 불특정성, 비정형 패턴 등에 기인하여 예측 모델 연구가 매우 난해한 대상이기 때문이라 할 수 있다. 본 연구에서는 근래에 관심이 급증하고 있는 인공신경망 연구 소프트웨어인 Tensorflow (www.tensorflow.org)와 대표적인 Open source인 OpenNN (www.openn.net)을 스마트 시설환경 환경변수 상호간 상관성 분석에 응용하였다. 해당 소프트웨어 라이브러리의 운영환경을 살펴보면 Tensorflow 는 Linux(Ubuntu 16.04.4), Max OS X(EL capitan 10.11), Windows (x86 compatible)에서 활용가능하고, OpenNN은 별도의 운영환경에 대한 바이너리를 제공하지 않고 소스코드 전체를 제공하므로, 해당 운영환경에서 바이너리 컴파일 후 활용이 가능하다. 소프트웨어 개발 언어의 경우 Tensorflow는 python이 기본 언어이며 python(v2.7 or v3.N) 가상 환경 내에서 개발이 수행이 된다. 주의 깊게 살펴볼 부분은 이러한 개발 환경의 제약으로 인하여 Tensorflow의 주요한 장점 중에 하나인 고속 연산 기능 수행이 일부 운영 환경에 국한이 되어 제공이 된다는 점이다. GPU(Graphics Processing Unit)의 제공하는 하드웨어 가속기능은 Linux 운영체제에서 활용이 가능하다. 가상 개발 환경에 운영되는 한계로 인하여 실시간 정보 처리에는 한계가 따르므로 이에 대한 고려가 필요하다. 한편 근래(2017.03)에 공개된 Tensorflow API r1.0의 경우 python, C++, Java언어와 함께 Go라는 언어를 새로 지원하여 개발자의 활용 범위를 매우 높였다. OpenNN의 경우 C++ 언어를 기본으로 제공하며 C++ 컴파일러를 지원하는 임의의 개발 환경에서 모두 활용이 가능하다. 특징은 클러스터링 플랫폼과 연동을 통해 하드웨어 가속 기능의 부재를 일부 극복했다는 점이다. 상기 두 가지 패키지를 이용하여 2016년 2월부터 5월 까지 충북 음성군 소재 딸기 온실 내부에서 취득한 온도, 습도, 조도, CO2에 대하여 Large-scale linear model을 실험적(시간단위, 일단위, 주단위 분할)으로 적용하고, 인접한 세그먼트의 환경변수 예측 모델링을 수행하였다. 동일한 조건의 학습을 수행함에 있어, Tensorflow가 개발 소요 시간과 학습 실행 속도 측면에서 매우 우세하였다. OpenNN을 이용하여 대등한 성능을 보이기 위해선 병렬 클러스터링 기술을 활용해야 할 것이다. 오프라인 일괄(Offline batch)처리 방식의 한계가 있는 인공신경망 모델링 기법과 현장 보급이 불가능한 고성능 하드웨어 연산 장치에 대한 대안 마련을 위한 연구가 필요하다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.1
• /
• pp.96-101
• /
• 2013

This study was carried out to investigate the changes in antioxidant activity, and the isoflavone and free amino acid content in fermented tofu of the ingredients of kimchi (red pepper, garlic, ginger, and anchovies) and lactic acid bacteria (Pediococcus acidilactici KL-6) during 24 weeks of fermentation at $20^{\circ}C$. The total polyphenol content of various types of fermented tofu such as the control (tofu with kimchi ingredients mixture), tofu and kimchi ingredients with lactic acid bacteria (TL), and tofu in pre-fermented kimchi ingredients with lactic acid bacteria (TPL) ranged from 156.34 to 165.17 mg/g, showing that TPL was significantly higher in terms of fermentation time (6 weeks) compared to others. The DPPH free radical scavenging activity of TPL (84.11%) was higher than that of the control (76.68%) and TL (78.95%) after 12 weeks fermentation at $20^{\circ}C$. The changes of nitrite scavenging activity and SOD-like activity in the tested tofu showed the same tendency as the DPPH free radical scavenging activity during 14 weeks fermentation TPL showed statistically significant levels of increased antioxidant activity, so we compared the isoflavone and free amino acid content. The isoflavone and free amino acid content of TPL was 2.34 mg/g and 20.81 mg/g after 14 weeks fermentation, respectively.

• Food Science and Preservation
• /
• v.15 no.4
• /
• pp.524-531
• /
• 2008

To investigate tea prepared from Ixeris dentata root, color, and levels of free sugars, organic acids, cynaroside, total polyphenolics, and free amino acids were investigated using various thermal processing methods. These included natural drying(ND), hot-air drying(HAD, $75^{\circ}C$), hot-air drying after steam(HADS, steaming at $95^{\circ}C$ for 30 min) and roasting after hot-air drying(RHAD, roasting at $140^{\circ}C$ for $2{\sim}3$ min). Total free sugars, organic acids, cynaroside, and free amino acids contents were highest after ND treatment. Total polyphenolics was highest after RHAD processing. The level of cynaroside, a principal component of Ixeris dentata root, was significantly decreased by HADS. The major free sugars were fructose, glucose and sucrose. Succinic acid was prominent among organic acids, and was present at 2.25%(v/v) after ND treatment. The lightness(L), redness(a), and yellowness(b) of all dried Ixeris dentata root powders were best after RHAD treatment, but analysis of the leaching liquids after hot water treatment yielded variable results. Lightness and redness were the highest after RHAD and yellowness was the highest after ND treatment. Overall, the RHAD drying method was found to be superior to other methods, in sensory evaluation tests.