• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.24-28
• /
• 2012

$In_2O_3$ films were deposited by RF magnetron sputtering on a glass substrate and then the effect of post deposition annealing in nitrogen atmosphere on the structural, optical and electrical properties of the films was investigated. After deposition, the annealing process was conducted for 30 minutes at 200 and $400^{\circ}C$. XRD pattern analysis showed that the as deposited films were amorphous. When the annealing temperature reached 200-$400^{\circ}C$, the intensities of the $In_2O_3$ (222) major peak increased and the full width at half maximum (FWHM) of the $In_2O_3$ (222) peak decreased due to the crystallization. The films annealed at $400^{\circ}C$ showed a grain size of 28 nm, which was larger than that of the as deposited amorphous films. The optical transmittance in the visible wavelength region also increased, while the electrical sheet resistance decreased. In this study, the films annealed at $400^{\circ}C$ showed the highest optical transmittance of 76% and also showed the lowest sheet resistance of $89{\Omega}/\Box$. The figure of merit reached a maximum of $7.2{\times}10^{-4}{\Omega}^{-1}$ for the films annealed at $400^{\circ}C$. The effect of the annealing on the work-function of $In_2O_3$ films was considered. The work-function obtained from annealed films at $400^{\circ}C$ was 7.0eV. Thus, the annealed $In_2O_3$ films are an alternative to ITO films for use as transparent anodes in OLEDs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.165-165
• /
• 2010

GaInZnO는 투명 비정질 산화물 반도체로서 태양전지, 평판 액정 디스플레이, 잡음방지 코팅, 터치 디스플레이 패널, 히터, 광학 코팅 등 여러 응용에 쓰인다. 이 논문에서는 투명전자소자로 관심을 모으고 있는 GaInZnO의 전자적 그리고 전기적 특성을 측정하였다. GaInZnO 박막은 $SiO_2$ (100)/Si 기판위에 RF 마그네트론 스퍼터링 증착법으로 $Ga_2O_3:In_2O_3:ZnO$의 조성이 2:2:1로 된 타겟을 가지고 박막을 성장시켰다. 성장한 후에 RTP를 이용하여 30분간 열처리 하였다. GaInZnO의 전자적 특성을 나타내는 띠틈 및 실리콘 기판과의 원자가 띠 오프셋 값을 측정하였으며, 이 값들을 통해 GaInZnO박막과 실리콘 기판과의 띠 정렬도 수행하였다. 띠틈은 반사 전자 에너지 손실 분광법(REELS)을 이용하여 측정하였고, 원자가 띠 오프셋은 광전자 분광법(XPS)을 이용하여 측정하였다. 열처리 온도가 $400^{\circ}C$까지는 띠틈의 변화 및 XPS 결합에너지의 변화가 없는 것으로 보아 열적안정성이 우수함을 알 수 있다. 반면 $450^{\circ}C$에서의 띠틈이 감소하는 것으로 보아 $450^{\circ}C$에서는 열적안정성이 깨지는 것을 알 수 있다. GaInZnO 박막을 채널 층으로 하고 전극은 알루미늄(Al)으로 된 TFT를 제작하여 전기적 특성을 조사하였다. TFT 특성 결과 이동도가 약, subthreshold swing(S.S)이 약 1.5 V/decade, 점멸비가 약 $10^7$으로 측정되었다. 유리 위에 증착시킨 GaInZnO 박막의 투과율을 측정해본 결과 모든 시료가 가시광선 영역에서 80%이상의 투과율을 갖는 것으로 보아 투명전극소자로 응용이 가능하다는 것을 알 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.316-316
• /
• 2010

Thin films spin-coated from solvent solutions are characterized by solution parameters and spin-coating process. In this study, performance characteristics of polymer solar cells were investigated with changing solution parameters such as solvent and additives. The phase-separation between polymer and fullerene is needed to make the percolation pathway for better transportation of hole and electron in polymer solar cells. For this reason, cooperative effects of solvent mixtures adding additives with distinct solubility have been studied recently. In this study, chlorobezene, 1, 2-dichlorbenzene, and chloroform were used as solvent. 1, 8-diiodoctaned and 1, 8-octanedithiol were used as additives and were added into poly(3-hexylthiophene-2, 5-diyl)/[6, 6]-phenyl C61 butyric acid methyl ester (P3HT/PCBM) blends. Pre-patterned ITO glass was cleaned using ultrasonication in mixed solvent with ethyl alcohol, isopropyl alcohol and acetone. PEDOT:PSS was spin-coated on to the ITO substrate at 3000rpm and was baked at $120^{\circ}C$ for 10min on the hotplate. The prepared solution was spin-coated at 1000rpm and the spin-coated thin film was dried in the Petri dishes. Al electrode was deposited on the thin film by thermal evaporation. The devices were annealed at $120^{\circ}C$ for 30min. By adding 2.5 volume percent of additives into the chlorobenzene from that bulk heterojunction films consisting of P3HT/PCBM, the power efficiency (AM 1.5G conditions) was increased from 2.16% to 2.69% and 3.12% respectively. We have investigated the effect of additives in P3HT/PCBM blends and the film characteristics and the film characteristics including J-V characteristics, absorption, photoluminescence, X-ray diffraction, and atomic force microscopy to mainly depict the morphology control by doping additives.

• Carbon letters
• /
• v.16 no.2
• /
• pp.78-85
• /
• 2015

Activated carbons (ACs) were prepared by activation of coal tar pitch (CTP) in the range of $700^{\circ}C-1000^{\circ}C$ for 1-4 h using potassium hydroxide (KOH) powder as the activation agent. The optimal activation conditions were determined to be a CTP/KOH ratio of 1:4, activation temperature of $900^{\circ}C$, and activation time of 3 h. The obtained ACs showed increased pore size distribution in the range of 1 to 2 nm and the highest specific capacitance of 122 F/g in a two-electrode system with an organic electrolyte, as measured by a charge-discharge method in the voltage range of 0-2.7 V. In order to improve the performance of the electric double-layer capacitor electrode, various mixtures of CTP and petroleum pitch (PP) were activated at the optimal activation conditions previously determined for CTP. Although the specific capacitance of AC electrodes prepared from CTP only and the mixtures of CTP and PP was not significantly different at a current density of 1 A/g, the AC electrodes from CTP and PP mixtures showed outstanding specific capacitance at higher current rates. In particular, CTP-PP61 (6:1 mixture) had the highest specific capacitance of 132 F/g, and the specific capacitance remained above 90% at a high current density of 3 A/g. It was found that the high specific capacitance could be attributed to the increased micro-pore volume of ACs with pore sizes from 1 to 2 nm, and the high power density could be attributed to the increased meso-pore volume.

• Journal of Periodontal and Implant Science
• /
• v.44 no.3
• /
• pp.134-140
• /
• 2014

Purpose: Triphala is a combination of three medicinal plants, extensively used in Ayurveda since ancient times. Triphala mouthwash is used in the treatment of periodontal diseases because of its antimicrobial and antioxidant properties. The aim of this study is to compare the efficacy of triphala mouthwash with 0.2% chlorhexidine in hospitalized periodontal disease patients. Methods: In this double-blind, randomized, multicenter clinical trial, 120 patients were equally divided into three groups. Patients in group A were advised to rinse their mouths with 10 mL of distilled water, group B with 0.2% chlorhexidine, and group C with triphala mouthwash for 1 minute twice daily for two weeks. The plaque index (PI) and the gingival index (GI) were recorded on the first and the fifteenth day. Results: There was no significant difference when the efficacy of triphala was compared with 0.2% chlorhexidine in hospitalized patients with periodontal disease. However, a statistically significant difference was observed in PI and GI when both group B and group C were compared with group A and also within groups B and C, after 15 days (P<0.05). Conclusions: The triphala mouthwash (herbal) is an effective antiplaque agent like 0.2% chlorhexidine. It is significantly useful in reducing plaque accumulation and gingival inflammation, thereby controlling periodontal diseases in every patient. It is also cost effective, easily available, and well tolerable with no reported side effects.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.3
• /
• pp.73-77
• /
• 2000

Single crystal and polycrystalline Si thin films were doped with phosphorus by a 2-zone diffusion method to develop the low-resistivity polycrystalline Si electrode for a hemispherical grain. Solid phosphorus source was used in order to achieve uniformly and highly doped surface region of polycrystalline Si films having rough surface morphology. In case of 2-zone diffusion method, it is proved that the heavy doping near the surface area can be achieved even at a relatively low temperature. SIMS analysis revealed that phosphorus doping concentration in case of using solid P as a doping source was about 50 times as that of phosphine source at 750$^{\circ}C$. Also, ASR analysis revealed that the carrier concentration was about 50 times as that of phosphine. In order to evaluate the electrical characteristics of doped polycrystalline Si films for semiconductor devices, MOS capacitors were fabricated to measure capacitance of polycrystalline Si films. In ${\pm}$2 V measuring condition, Si films, doped with solid source, have 8% higher $C_{min}$ than that of unadditional doped Si films and 3% higher $C_{min}$ than that of Si films doped with $PH_3$ source. The leakage current of these films was a few fA/${\mu}m^2$. As a result, a 2-zone diffusion method is suggested as an effective method to achieve highly doped polycrystalline Si films even at low temperature.

• Korean Journal of Food Science and Technology
• /
• v.47 no.6
• /
• pp.772-778
• /
• 2015

Hydrolysis of isolate soybean protein (ISP) using subcritical water (SCW) was conducted to study the feasibility for producing protein hydrolyzate. SCW hydrolysis of SPI suspension (5-15%) was conducted in an electrically heated batch reactor (2 L). The effects of temperature (230 to $270^{\circ}C$) and holding time (10 to 50 min) on the degree of hydrolysis (DH) and the production of amino acids were studied by surface response method. The DH was determined by derivatizing the hydrolyzates with ortho-phthalaldehyde (OPA) solution. It was confirmed that reaction temperature and holding time affected the hydrothermolysis of soybean protein. However, the holding time was less effective on amino acid yield when the temperature was higher than $230^{\circ}C$. In order to achieve optimal yields of amino acids exceeding 43%, the temperature should be within the range between 256 and $268^{\circ}C$ with holding time from 29 to 41 min, respectively. A maximum estimated amino acid yield of 43.5% was obtained at $268^{\circ}C$ for 35 min.

• Microbiology and Biotechnology Letters
• /
• v.36 no.1
• /
• pp.61-66
• /
• 2008

The proteins in whey are separated and used as food additives. The remains (mainly lactose) are spray-dried to produce sweet whey powder, which is widely used as an additive for animal feed. Sweet whey powder is also used as a carbon source for the production of valuable products such as polysaccharides. Glucose, fructose, galactose, and sucrose as asupplemental carbon source were evaluated for the production of PS-7 from Azotobacter indicus var. myxogenes L3 grown on whey based MSM media. Productions of PS-7 with 2% (w/v) fructose and sucrose were 2.05 and 2.31g/L, respectively. The highest production of PS-7 was 2.82g/L when 2% (w/v) glucose was used as the carbon source. Galactose showed low production of PS-7 among the carbon sources tested. The effects of various carbon sources addition to whey based MSM medium showed that glucose could be the best candidate for the enhancement of PS-7 production using whey based MSM medium. To evaluate the effect of glucose addition to whey based media on PS-7 production, fermentations with whey and glucose mixture (whey 1, 2, 3%; whey 1% + glucose 1%, whey 1% + glucose 2% and glucose 2%, w/v) were carried out. Significant enhancement of PS-7 production with addition of 1% (w/v) and 2% (w/v) glucose in 1% (w/v) whey media was observed. The PS-7 concentration of 2% glucose added whey lactose based medium was higher than that of 1% glucose addition, however, the product yield $Y_{p/s}$ was higher in 1% glucose added whey lactose based MSM medium. Therefore, the optimal condition for the PS-7 production from the Azotobacter indicus var.myxogenes L3, was 1% glucose addition to 1% whey lactose MSM medium.

• Resources Recycling
• /
• v.13 no.1
• /
• pp.47-53
• /
• 2004

As a basic study of the re-using molten converter slag as an ordinary portland cement by conversion process, molten slag and sintered CaO pellet was reacted each other. The dissolution rate of the sintered CaO pellet into the molten slag was measured and the changes of the reaction layer was also investigated. The converter slag reagent-grade $SiO_2$ added was melted and hold for 30 minutes in MgO crucible between $1350∼1500 ^{\circ}C$. Then sintered CaO pellet heated at the same temperature was dipped into the molten slag and hold for 10∼30 min. After the reaction, the crucible was cooled in air and the specimen was cut off to the horizontal direction of the crucible. The dissolution rate of CaO pellet was measured by the change of the radius of sintered CaO pellet and the interface layer was observed by SEM/EDX and XRD. The dissolution rate of sintered CaO pellet contacted with the slag of basicity 1 was 9.8 $\mu\textrm{m}$/min at $1350^{\circ}C$ and increased to 18.0 $\mu\textrm{m}$/min at $1500^{\circ}C$. The rate was slightly decreased to 7.6 $\mu\textrm{m}$/min at $1350^{\circ}C$ and 15.0 $\mu\textrm{m}$/min at $V^{\circ}C$ in the slag of basicity 2. The dissolution rate of CaO in converter slag was followed to the rule of Arrhenius' temperature dependency, and the apparent activation energy of the dissolution of CaO was 36 kcal/mole. In case of the slag basicity of 1, the thickness of $C_2$S layer was 64-118 $\mu\textrm{m}$ and the thickness of $C_3$S was 28∼90 $\mu\textrm{m}$ for 10∼30 minutes at $1500^{\circ}C$. And the thickness of the $C_3$S layer was 90∼120 $\mu\textrm{m}$ at the same conditions in the slag basicity of 2.

• Korean Journal of Veterinary Research
• /
• v.35 no.3
• /
• pp.515-530
• /
• 1995

Coronaviridae에 속하는 transmissible gastroenteritis virus(TGEV)와 porcine epidemic diarrhea virus(PEDV)를 specific하게 detection할 수 있는 방법을 개발하고자 본 연구를 수행하였다. 두 바이러스 모두 RNA 바이러스이기 때문에 reverse transcription-polymerase chain reaction(RT-PCR)으로 nucleocapsid(N) protein gene의 cDNA를 증폭시켰다. SmaI으로 처리한 pTZ19R에 ligation시킨 후 염기서열을 밝히고자 sequencing하였다. 각각의 prototype virus와 비교하여 상동성을 밝혔다. 두 바이러스에 대한 cDNA probe를 제작하여 Southern blot hybridization을 실시하였다. TGEV의 경우 백신주인 P45와 병독주인 Miller strain을 사용하였다. cDNA를 증폭시키기 위해 N1/N1R과 N2/N2R 두 가지 primer를 이용한 결과, N1/N1R primer의 경우 586bp 크기의 PCR product를 얻을 수 있었고, N2/N2R primers로 582bp의 cDNA를 증폭시킬 수 있었다. PEDV 실험을 위하여 PED 임상 증상을 나타내는 분변을 이용하여 RT-PCR을 실시하였다. P2/P2R primer로 753bp의 PCR product를 얻을 수 있었다. TGEV의 두 가지 strain의 N protein gene을 sequencing하여 prototype인 Purdue strain과 염기서열 상동성을 조사한 결과, 97%이상의 높은 homology를 나타내었다. PED-V 역시 N protein gene을 sequencing하여 CV777과 염기서열 상동성을 조사한 결과 97%이상의 homology로 PEDV임을 알 수 있었다. TGEV와 PEDV의 염기서열을 비교한 결과 29%의 낮은 homology를 관찰할 수 있었다. 두 가지 바이러스의 N protein gene에 대한 cDNA probe를 제작하여 Southern blot hybridization을 한 결과, 각 바이러스에 매우 특이적 반응을 나타내었다.