• Animal Bioscience
• /
• v.34 no.2
• /
• pp.265-275
• /
• 2021

Objective: The study developed mushroom stalk residues as feed additives in the broiler diet for improving the growth performance and immunity of broilers as well as to increase the value of mushroom stalk residues. Methods: In total, 300 ROSS 308 broilers were randomly allocated into fifteen pens with five dietary treatments: i) control, basal diet; ii) CMWM, supplemented with 1% Cordyceps militaris waster medium (CM); iii) CMPE, supplemented with 0.5% CM+0.5% Pleurotus eryngii stalk residue (PE); iv) CMPS, supplemented with 0.5% CM+0.5% Pleurotus sajorcaju stalk residue (PS); v) CMFV, supplemented with 0.5% CM+0.5% Fammulina velutipes stalk residue (FV). Results: The chemical analysis results showed that CM extracts, PE extracts, PS extracts, and FV extracts contain functional components such as polysaccharides and phenols and have both 2, 2-diphenyl-1-picryl-hydrazyl-hydrate scavenging and Ferrous scavenging capacities. The group CMWM saw increased body weight gain and feed conversion rate and the promotion of jejunum villus growth, but there is no significant difference in the intestinal bacteria phase. Antioxidant genes in the nuclear factor (erythroid-derived 2)-like 2 (Nrf2)- antioxidant responsive element pathway among the groups are significantly higher than that of the control group, especially in group CMWM. Conclusion: The mushroom stalk residues have antioxidant functional components, can improve the intestinal health and body weight gain of chickens, and can activate the antioxidant pathway of Nrf2 to increase the heme oxygenase-1 expression. The treatment with 1% CM was the most promising as a feed additive.

• Korean Journal of Food Science and Technology
• /
• v.42 no.5
• /
• pp.565-570
• /
• 2010

A coenzyme Q10 nanoemulsion was prepared using high pressure homogenization with different valve type conditions (A, B, and C) and cycle numbers (1, 2, and 3). The particle size, transmittance, zeta potential, and coenzyme Q10 content of the prepared coenzyme Q10 nanoemulsion were measured. The stability of the prepared coenzyme Q10 nanoemulsion was evaluated on heating ($95^{\circ}C$), freezing ($-20^{\circ}C$), and different pH (2-10) conditions. Also, the prepared coenzyme Q10 nanoemulsion was stored at different temperatures of 4, 25, and $40^{\circ}C$ for 12 weeks to evaluate its storage stability. In this study, the optimal conditions of high pressure homogenization for the preparation of a coenzyme Q10 nanoemulsion were identified to be 150 MPa, C valve, and a cycle number of 3. The results showed that the prepared coenzyme Q10 nanoemulsion had an average particle size of 40 nm, generated no deposits or floating matter when stored at either 4 or $25^{\circ}C$ for 12 weeks, and displayed excellent dispersibility and transparency when processed at different pHs (4-10) or heating ($95^{\circ}C$) and, freezing ($-20^{\circ}C$) conditions. Our results indicated that a coenzyme Q10 nanoemulsion prepared by high pressure homogenization can be used for preparing beverages in the food industry.

• Preventive Nutrition and Food Science
• /
• v.7 no.3
• /
• pp.299-304
• /
• 2002

Volatile flavor compounds in the headspace of swiss cheese whey protein concentrate (WPC) were analyzed by dynamic headspace analyzer, gas chromatography, and mass spectrometer. Sixty one compounds were detected from the headspace of dry WPC and 23 compounds from the headspace of an aqueous solution of WPC. The major components were propanol, hexanal, 2-butanone, 2-pentanone, 2,3-butanedion, 2-propanol, acetic acid, dimethyl disulfide and benzothiazole. An external dynamic headspace sampler, devised for this study, effectively collected volatiles from the headspace of dry WPC and aqueous WPC solutions.

• Korean Journal of Microbiology
• /
• v.21 no.2
• /
• pp.86-94
• /
• 1983

Polygalacturonase of Byssochlamys fulva was purified and characterized. Specific activity increased from 2.21 units/mg protein to 10.47 units/mg protein through $(NH_4)_2SO_4$ treatment, SephadexG-100 gel filtration, and DEAE-Sephadex ion exchange chromatography. Divalent cations, such as $Ca^{++}\;and\;Cu^{++}$, increased polygalacturonase activity greatly. Added as $10^{-3}M$ concentration, $Ca^{++}$ ion enhanced enzyme activity 9.8folds. Optimum temperature was $50^{\circ}C$ and optimum pH was 5.0. Activation energy of reaction was 8.69 Kcal/mole. Michaelis-Menten $constant(K_M)\;and\;V_{max}$ of reaction were $6.27{\times}10^{-3}mole/l\;and\;2.85{$\mu}moles/min$. Polygalacturonase of Byssochlamys fulva preferred polygalacturonic acid to pectin as substrate and was presumed as endo-type on the basis of the relationship between viscosity reduction and substrate degradation. Molecular weight of polygalacturonase was estimated as 55,000.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.2
• /
• pp.43-46
• /
• 2000

Nd:YAG laser of 355 nm wavelength, which amounts to 3.5 eV, produced by a harmonic generator was used to create Ag metallic particles as seeds for nucleation in photosensitive glass containing $Ag^+$ and $Ce^{3+}$ . The pulse widths and frequency of the laser were 8ns and 10 Hz, respectively. For crystalline growth, heat-treatment following laser irradiation was carried out at $570^{\circ}C$ for 1h. Then, the $LiAlSi_3O^8$ crystal phase appeared in the laser irradiated lithium aluminum silicate glass. We present the effect of laser-induced nucleation compared with spontaneous nucleation by heat treatment fur crystallization in the glass.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.131-137
• /
• 2009

In this paper, we have manufactured hole type PRAM unit cell using phase change material $Ge_2Sb_2Te_5$. The phase change material $Ge_2Sb_2Te_5$ was deposited on hole of 500 nm size using sputtering method. Reset current of PRAM unit cell was confirmed by measuring R-V characteristic curve. Reset current of manufactured hole type PRAM unit cell is 15 mA, 100 ns. And electro and thermal characteristics of hole type PRAM unit cell were analyzed by 3-D finite element analysis. From simulation temperature of PRAM unit cell was $705^{\circ}C$.

• Magazine of the Korea Concrete Institute
• /
• v.2 no.2
• /
• pp.63-72
• /
• 1990

In this study, an optimization design of reinforced concrete structures is performed by using the structural optimization techniques based on the LRFD criteria. The target reliability index is estimated by the optimal reliability index considering the expected cost which is taken as a sum of the structural cost and the expected costs due to failure of the structure. The load and resistance factors calculated by using level I reliability theory with the target reliability index are compared for each load combination (D+L, D+L+w). The results of this study show that the resistance factors are ${\phi}_{M}$=0.90, ${\phi}_{V}$==0.70, ${\phi}_{C}$==0.65 and the load factors are 1.20D + 1.70L, 1.07L + 0.07L + 1.10W. The optimization techinques used to this study are S.L.P. The optimization design based on the LRFD criteria is more economical and rational than other criteria.

• Mycobiology
• /
• v.42 no.3
• /
• pp.256-261
• /
• 2014

A ${\beta}$-glucosidase producing yeast strain was isolated from Korean traditional rice wine. Based on the sequence of the YCL008c gene and analysis of the fatty acid composition, the isolate was identified as Saccharomyces cerevisiae strain HJ-014. S. cerevisiae HJ-014 produced ginsenoside Rd, $F_2$, and compound K from the ethanol extract of red ginseng. The production was increased by shaking culture, where the bioconversion efficiency was increased 2-fold compared to standing culture. The production of ginsenoside $F_2$ and compound K was time-dependent and thought to proceed by the transformation pathway of: red ginseng extract ${\rightarrow}Rd{\rightarrow}F_2{\rightarrow}$ compound K. The optimum incubation time and concentration of red ginseng extract for the production of compound K was 96 hr and 4.5% (w/v), respectively.

• Journal of the Korean Vacuum Society
• /
• v.4 no.1
• /
• pp.26-31
• /
• 1995

본 연구에서는 Co/Si 계에 대한 이온선 혼합실험을 온도와 이온선량을 변수로 하여 실시하였고, Co/Si 계에 대한 상형성 과정을 금속/Si 계에 대한 이온선 혼합시의 비정질상 및 결정상 형성예측 모델(ADF Model)과 초기 결정상 예측 모델(PDF Model)을 이용하여 해석하였다. 이온선 혼합은 80KeV 가속기를 이용하여 상온$-400^{\circ}C$의 온도 범위에서 1.0X1015Ar+/$\extrm{cm}^2$-2.0X1016Ar+/$\textrm{cm}^2$의 이온선량을 변화시키면서 실험하였으며 상분석은 투과전자현미경(TEM)과 X선 회절 분석을 이용하였다. Co/Si 계에서 이온선 혼합시 형성되는 초기 결정상은 Co2Si이며 이온선량의 증가에 따라 CoSi로 상전이하였다. 이러한 실험 결과는 비정질상 및 결정상 형성 예측 모델(ADF model)과 초기 결정상 예측모델(PDF model)의 예측결과와 매우 잘 일치하고 있다. 이상의 연구 결과로부터 ADF 모델과 PDF모델을 이용하여 박막에서 형성되는 상을 보다 정확히 예측할 수 있음을 알 수 있었다.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2001.05a
• /
• pp.22-40
• /
• 2001

Apoptosis is characterized by DNA fragmentation, chromatin condensation and plasma membrane blebbing. These apoptotic processes have been mainly associated with genetic mechanisms. Recently, these processes have been also associated with mitochondrial events that include the release of cytochrome c and Diablo/SMAC by modulation of mitochondrial membrane permeability.(omitted)