• Journal of Life Science
• /
• v.29 no.10
• /
• pp.1126-1135
• /
• 2019

From a sample of bamboo byproduct, the protease-producing yeast strain CO-1 was newly isolated. Strain CO-1 is spherical to ovoid in shape and measures $3.1-4.0{\times}3.8-4.4{\mu}m$. For the growth of strain CO-1, the optimal temperature and initial pH were $30^{\circ}C$ and 4.0, respectively. The strain was able to grow in 0.0-15.0%(w/v) NaCl and 0.0-9.0%(v/v) ethanol. Based on a phylogenetic analysis of its 18S rDNA sequences, strain CO-1 was identified as Pichia anomala. The extracellular protease produced by P. anomala CO-1 was partially purified by ammonium sulfate precipitation, which resulted in a 14.6-fold purification and a yield of 7.2%. The molecular mass of the protease was recorded as approximately 30 kDa via zymogram. The protease activity reached its maximum when 1.0%(w/v) CMC was used as the carbon source, 1.0%(w/v) yeast extract was used as the nitrogen source, and 0.3%(w/v) $MnSO_4$ was used as the mineral source. The protease revealed the highest activity at pH 7.0 and $30^{\circ}C$. This enzyme maintained more than 75% of its stability at a pH range of 4.0-10.0. After heating at $65^{\circ}C$ for 1 hr, the neutral protease registered at 60% of its original activity. The protease production coincided with growth and attained a maximal level during the post-exponential phase.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.2
• /
• pp.221-225
• /
• 2005

An in vitro study was conducted to examine the effect of monensin or fish oil addition on bio-hydrogenation of $C_{18^-} unsaturated fatty acids and CLA production by mixed ruminal bacteria when incubated with safflower oil. Commercially manufactured concentrate (1%, w/v) with safflower oil (0.2%, w/v) were added to mixed solution (600 ml) of strained rumen fluid and McDougalls artificial saliva (control). Monensin $Rumensin^{(R)}$, 10 ppm, w/v, MO), mixed fish oil (0.02%, w/v, absorbed to 0.2 g alfalfa hay, FO) or similar amounts of monensin and fish oil (MO+FO) to MO and FO was also added into the control solution. All the culture solutions prepared were incubated in the culture jar anaerobically at $39^{\circ}C$ up to 12 h. Higher pH (p<0.047) and ammonia concentration (p<0.042) were observed from the culture solution containing MO at 12 h incubation than those from the culture solutions of control or FO. The MO supplementation increased (p<0.0001-0.007) propionate proportion of culture solution but reduced butyrate proportion at 6 h (p<0.018) and 12 h (p<0.001) of incubations. Supplementation of MO or MO+FO increased (p<0.001) the proportions of $C_{18:2}$. The MO alone reduced (p<0.022-0.025) the proportion of c9,t11-CLA compared to FO in all incubation times. The FO supplementation increased the proportion of c9,t11-CLA. An additive effect of MO to FO in the production of c9,t11-CLA was observed at 6 h incubation. In vitro supplementation of monensin reduced hydrogenation of $C_{18^-}$UFAs while fish oil supplementation increased the production of CLA.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.319-325
• /
• 2005

In this paper the effect of temperature on the electrical properties of organic semiconductor disperse orange dye 25 (OD) have been examined. Thin films of OD have been deposited on $In_{2}O_{3}$ substrates using a centrifugal machine. DC current-voltage (I-V) characteristics of the fabricated devices $(Al/OD/In_{2}O_{3)$ have been evaluated at varying temperatures ranging from 40 to $60^{\circ}C$. A rectification behavior in these devices has been observed such that the rectifying ratio increases as a function of temperature. I-V characteristics observed in $Al/OD/In_{2}O_{3)$ devices have been classified as low temperature $({\leq} 50^{\circ}C)$ and high temperature characteristics (approximately $60^{\circ}C$). Low temperature characteristics have been explained on the basis of the charge transport mechanism associated with free carriers available in OD, whereas high temperature characteristics have been explained on the basis of the trapped space-charge-limited current. Different electrical parameters such as traps factor, free carrier density, trapped carrier density, trap density of states, and effective mobility have been determined from the observed temperature dependent I-V characteristics. It has been shown that the traps factor, effective mobility, and free carrier density increase with increasing values of temperature, whilst no significant change has been observed in the trap density of states.

• Korean Journal of Materials Research
• /
• v.16 no.4
• /
• pp.264-271
• /
• 2006

RF sputtering process was applied to produce thin hydroxyapatite(HAp) films on Ti-6Al-4V alloy substrates. The effects of different heat treatment conditions on the chemical composites between HAp thin films and Ti-6Al-4V alloy substrates were studied. After deposition, the HAp thin films were heat treated for 1h at $400^{\circ}C,\;600^{\circ}C\;and\;800^{\circ}C$ under the atmosphere, and analyzed O/M, FESEM-EDX and ESCA, respectively. Experimental results represented that interface of HAp thin films and Ti-6Al-4V alloy substrates was composed Ti-OH, TiO, TiN, $Al_2O_3,\;V_2O_3,\;VO_2$. pyrophosphate and decreased carbide followed by the increase of heat treatment temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.8
• /
• pp.522-527
• /
• 2014

In this study, using the silicone rubber sample of $4cm{\times}4cm{\times}0.1cm$ for low voltage cable, the electrostatic electrification properties of three samples that the conductive Al of 0%, 25%, and 50% is attached to the surface of sample was measured. The following conclusion was obtained through this experiment. 1) In case of the sample which has the Al area of 50%, the higher the humidity to 90% in the temperature of $10^{\circ}C$, the electrostatic electrification voltage was reduced about 0.25 kV to 0.02 kV, and it confirmed that the electrostatic electrification voltage was in constant about 0.02 kV in the temperature over $20^{\circ}C$. 2) Increasing the Al area of samples of 0%, 25%, and 50% in temperature of $10^{\circ}C$, it confirmed that the electrostatic electrification voltage was reduced by about 2.67 kV, 2.02 k, 0.21 kV. 3) This study shows that the conductor, followed by temperature and humidity affects the electrostatic electrification voltage.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.1
• /
• pp.60-66
• /
• 1995

Vibrio cholerae non-O1 and Vibrio mimicus, food poisoning bacteria, have detected frequently in fresh water and brackish water. To estabilsh prevention measures of food poisoning outbreak by these bacteria, the adaptability and population changes were examined in fresh water, brackish water $(10\%o\;NaCl)$ and seawater $(30\%o\;NaCl)$. Both species poorly survived as temperature increased regardless of water types employed. However, survival time was the shortest in fresh water and longest in seawater at $4^{\circ}C$. In case of brackish water, the bacteria survived best at $15^{\circ}C$ and population were varied only in small numbers. Any significant difference was not observed to both species with respect to water types and temperatures except V. mimicus survived about 5-6 days longer in brackish water. In conclusion, V. cholerae non-O1 and V. mimicus were not likely to be recovered In normal fresh water, brackish water and seawater, and both biological and physicochemical factors could affect survival of these species.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.398-399
• /
• 2001

A fungus. Penicillium sp. PS-113. with high phosphate-solubilizing activities was isolated from soil and tested the viability in POA medium supplemented with various concentrations of Trio in order to develop a dispersing agent for liquid formulation. Moreover, the number of Penicillium sp. PS-113 conidia, stored at $4^{\circ}C$ and $25^{\circ}C$ with Trio(0.1%) and various concentrations of additives($Cu^{++}$ $Mo^{++}$, bio-ceramic, Tween 80, PEG 200. diatomite. SDS), was counted on PDA at the intervals of 2 weeks. As a result, the liquid formulation containing 0.1 %( v/v) Trio was remarkably improved in dispersing ability and the viability of the conidia, and each of the supplements (0,01% $Mo^{++}$, 0.5% bio-ceramic. 1.0% Tween 80, 1.0% PEG 200) was similar to the 0.1% Trio.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.83-89
• /
• 1999

The electrical properties due to mixture ratio of linear low density polyethylene(LLDPE) and ethylene vinyl acetate(EVA) films are studied. An experimental specimen is selected as LLDPE/EVA of thickness 200${\mu}{\textrm}{m}$ produced by mixture ratio of 50 : 50, 60 : 40, 70 : 30 and 80 : 2 wt%. In temperature range from $25^{\circ}C$ to 12$0^{\circ}C$, the measurement of volume resistivity using a highmegohm meter is performed within 10 minutes since each voltage of DC 100 V, 250 V, 500 V and 1000 V is applied, according to the step voltage method. From FT-IR spectrum for an analysis of physical properties, it can be confirmed that LLDPE blended with EVA shows an absence of carbonyl groups(1735 $cm^{-1}$, C=0) and ether groups(1242 $cm^{-1}$, C-O). The peak of LLDPE and EVA made of mixture ratio of 70 : 30 at 2$\theta$ =21.4$^{\circ}$ in the results of XRD is higher than the others. In the experiment for volume resistivity characteristics in order to investigate the electrical properties of specimen, it is confirmed that volume resistivity is decreased with the increase of the molecular motion and temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.467-471
• /
• 2001

DC accelerated aging characteristics of $Pr_{6}O_{11}$-based ZnO varistors, which are composed of $ZnO+Pr_{6}O_{11}+CoO+Cr_{2}O_{3}+Dy_{2}O_{3}$ ceramics were investigated with CoO content in the range of 0.5 - 5.0 mol%. The varistors doped with 1.0 mol% revealing maximum value(66.61) in the nonlinear exponent exhibited excellent stability, in which the variation rates of the varistor voltage, the nonlinear exponent and leakage current are -1.93%, -10.48%, and +288.79%, respectively, under DC accelerated aging stress, such as $(0.85V_{lmA}/115^{\circ}C/24h)+(0.90V_{lmA}120^{\circ}C/24h)+(0.95V_{lmA}/125^{\circ}C/24h)+(0.95V_{lmA}/150^{\circ}C/24h)$. Next the varistors doped with 2.0 mol% exhibiting the nonlinear exponent of 47.39 showed high stability.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.276-280
• /
• 2007

In this work, caffeine and some catechin compounds + C, EC, EGC, and EGCG were extracted from green tea by using molecular imprinted polymers (MIP) as sorbent materials in a solid-phase extraction (SPE) process known as MISPE (molecular imprinted solid-phase extraction). For synthesis of MIP, caffeine was employed as the template, MAA as the monomer, EGDMA as the crosslinker, and AIBN as the initiator. A solution of caffeine (0.2 mg/mL in methanol) was utilized in the solid extraction cartridges following loading, washing, and elution procedures with acetonitrile, methanol, and methanol-acetic acid (90/10, %v/v) as the solvents, respectively. This solid-phase extraction protocol was applied for the extraction of caffeine and some catechin compounds from green tea. A comparison was made between the results obtained with the MIP cartridges and a traditional C18 reversed-phase cartridge. It was thereupon found that the recovery of caffeine by the MIPbased sorbent used in this work was almost two and four times greater than that by a commercially available C18 material. A quantitative analysis was conducted by high performance liquid chromatography (HPLC) using a C18 column (5 μm, 250 × 4.6 mm) with methanol/water (40/60, %v/v) as the mobile phase at a flow rate of 0.5 mL/min.