• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.327-330
• /
• 2008

This paper shows an implementation of WLAN-based Audio/Video(A/V) system for multimedia home networks. Proposed WLAN-based A/V system can transmit multimedia data of high quality. The entire system consists of a 16-bit RISC controller, a program ROM, a SRAM, timers, an interrupt controller, a DART, GPIOs, an I2C and the OFDM modem supporting for the IEEE 802.11g standard. The simple MAC functions are implemented by firmware on an embedded 16-bit RISC controller. The OFDM modem supports a complete set of data rates up to 54Mbps. Proposed the system is implemented by an Altera FPGA EP1S60F1020C6 device, a 10-bit 2-ch DAC, a 10-bit 2-ch ADC and RF/IF chips.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.2
• /
• pp.109-117
• /
• 2017

This paper describes the design and implementation of a unit module for a 10 kVA class 13.2 kV/220 V unidirectional solid-state transformer (SST) with silicon-carbide metal-oxide-semiconductor field-effect transistors. The proposed module consists of an active-front-end (AFE) converter to interface 1320 V AC voltage source to 2500 V DC link and an isolated resonant DC-DC converter for 500 V low-voltage DC output. The design approaches of the AFE and the isolated resonant DC-DC converters are addressed. The control structures of the converters are described as well. The experiments for the converters are performed, and results verify that the proposed unit module can be successfully adopted for the entire SST operation.

• Korean Journal of Crystallography
• /
• v.6 no.1
• /
• pp.36-42
• /
• 1995

Two types of single crystals of the title compound [6-(2-pyridyl)-3, 5-hexadiyn-ol, PyHxD] were obtained by solution of n-hexane/CH2C12 and n-hexane/Et2O, and their molecular conformations are proved identical in spite of different of space groups; C22H18N2O2 (I), Mr=343.70, Monoclinic, Pa, a=14.595(2), b=5.413(2), c=12.218(2)Å, β=96.86(1)°, V=958.3Å3, Z=2, Dx=1.19 Mgm-3, λ(MoKα)=0.71069Å, μ=0.072mm-1, F(000)=360.0, T=292K, R=0.104 for 756 unique observed reflections. An asymmetric unit contains a dimer connected by two N-H…O intermolecular hydrogen bonds. C11H9NO (II), Mr=171.85, Monoclinic, P21/a, a=14.611(2), b=5.423(6), c=12.191(2)Å, β=96.89(1)°, V=959.0Å3, Z=4, Dx=1.19 Mgm-3, λ(MoKα)=0.71069Å, μ=0.072mm-1, F(000)=360.0, T=293K, R=0.066 for 824 unique observed reflection. The structural asymmetric unit contains a molecule, but two N-H…O hydrogen bonds related by controsymmetry make the molecules form a dimer. In both structure, the dihedral angle between the planar pyridyl ring and the plane defined by C(10)-C(11)-O connected by linear diyne chain is approximately normal, and the molecules are stacked along b-axis with the unit repeat of b-axis.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1155-1159
• /
• 1999

Thin film solar cells on a glass/$SnO_2$ substrate with p-SiC/i-Si/n-Si heterojunction structures were fabricated using a plasma-enhanced chemical-vapor deposition system. The photovoltaic properties of the solar cells were examined with varying the gas phase composition, x=$CH_4/\;(SiH_4+CH_4)$, during the deposition of the p-SiC layer. In the range of x=0~0.4, the efficiency of solar cell increased because of the increased band gap of the p-SiC window layer. Further increase in the gas phase composition, however, led to a decrease in the cell efficiency probably due to in the increased composition mismatch at the p-SiC/i-Si layers. As a result, the efficiency of a glass/$SnO_2$/p-SiC/i-SiC/i-Si/n-Si/Ag thin film solar cell with $1cm^2$ area was 8.6% ($V_{oc}$=0.85V, $J_{sc}$=16.42mA/$cm^2$, FF=0.615) under 100mW/$cm^2$ light intensity.

• Microbiology and Biotechnology Letters
• /
• v.29 no.2
• /
• pp.78-83
• /
• 2001

Phytase (myo-inositol hexakisphosphate phosphohydrolase: EC 3.1.3.8) hydrolyzes phytic acid (myo-inositol hexakisphosphate) to myo-inositol and monophosphates. In order to obtain phytase producing bacteria, many samples were collected from various soils. Among thirty-five phytase-producing strains, YH100 showed the highest phytase activity. In order to identify the selected YHlOO strain, the morphological and physiological characteristics were examined according to the method of Bergey's manual by 168 rRNA sequence, cellular fatty acids profile, O+C contents and physiological test using API 20E kit. The strain YH100 identified to be a genus of Enterobacter cloacae and was named as Enterobacter cloacae YHlOO. Optimum medium for the phytase production by the Entemhacter c!o([we YHlOO was composed of 2.0%(w/v) glucose, 1.0%(w/v) peptone, 1.0%(w/v) beef extract, 0.1 %(w/v) KCI. and 0.1 %( w/v) sodium phytate.

• Korean Journal of Microbiology
• /
• v.40 no.2
• /
• pp.139-146
• /
• 2004

A bacterium producing alkaline cellulase was isolated from soil, leaf mold and compost, and was identified as alkalophilic Bacillus sp. HSH-810 by morphological, cultural and biochemical determination. The optimum cul-ture condition of Bacillus sp. HSH-810 for the growth and alkaline cellulase production was $30^{\circ}C$ and pH 10.0. The maximum alkaline cellulase production was obtained when 1.0%(w/v) CMC, 0.5%(w/v) peptone, 0.02%(w/v) $CaCl_2$ and 0.02(w/v) $CoCl_2$ were used as carbon source, nitrogen source and mineral source, respectively. The optimum pH and temperature of the enzyme activity were pH 10.5 and $50^{\circ}C$, respectively. This enzyme was fairly stable in the pH range of 6.0-13.0 and at $50^{\circ}C$. For the effect of surfactants, the activity of alkaline cellulase was stable in the presence of sodium-$\alpha$-olefin sulfonate (AOS), sodium dodecyl sulfonate (SDS), Tween 20 and Tween 80, but inhibited by the presence of 0.1 linear alkyl-benzene sulfonate (LAS) sig-nificantly.

• Journal of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.203-210
• /
• 1988

Mono-oxo-bridged binuclear molybdenum(V) complex, $[Mo_2O_3(Phen)_2(NCS)_4]$ produces di-oxo-bridged binuclear molybdenum(V) complex, $[Mo_2O_4(Phen)_2(NCS)_2]$ in water + co-solvent, where the co-solvent are acetone, acetonitrile and N,N-dimethylformamide. The rate of conversion of $[Mo_2O_3(Phen)_2(NCS)_4]\;into\;[Mo_2O_4(Phen)_2(NCS)_2]$ has been measured by spectrophotometric method. Temperature was $10^{\circ}C$ to $40^{\circ}C$ and pressure was varied up to 1500 bar. The rate constants are increased with increasing water mole fraction and decreased with increasing concentration of hydrogen ion. The order of oxygen ring formation reaction rate in various cosolvent is as follows, ACT > AN > DMF which is agreed with solvent dielectric constants. The observed negative activation entropy ($[\Delta}S^{\neq}$), activation volume($[\Delta}V^{\neq}$) and activation compressibility coefficient(${\Delta}{\beta}^{\neq}$) values show that the solvent water molecule is strongly attracted to the complex at transition state. From these results, the oxygen ring formation reaction of $[Mo_2O_3(Phen)_2(NCS)_4]$ is believed association mechanism.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.419-426
• /
• 2001

The stochiometric $AgGaSe_2$ polycrystalline mixture of evaporating materials for the $AgGaSe_2$ single crystal thin film was prepared from horizontal furnace. To obtain the single crystal thin films, $AgGaSe_2$ mixed crystal and semi-insulating GaAs(100) wafer were used as source material and substrate for the Hot Wall Epitaxy (HWE) system, respectively. The source and substrate temperature were fixed at$ 630^{\circ}C$ and $420^{\circ}C$, respectively. The thickness of grown single crystal thin films is 2.1$\mu\textrm{m}$. The single crystal thin films were investigated by photoluminescence and double crystal X-ray diffraction(DCXD) measurement. The carrier density and mobility of AgGaSe$_2$ single crystal thin films measured from Hall effect by van der Pauw method are $4.89\Times10^{17}$ cm$^{-3}$ , 129cm2/V.s at 293K, respectively. From the Photocurrent spectrum by illumination of perpendicular light on the c-axis of the AgGaSe$_2$ single crystal thin film, we have found that the values of spin orbit splitting $$\Delta$S_{o}$ and the crystal field splitting $\Delta$C$_{r}$, were 0.1762eV and 0.2474eV at 10K, respectively. From the photoluminescence measurement of AgGaSe$_2$ single crystal thin film, we observed free excision (EX) observable only in high quality crystal and neutral bound exciton ($D^{o}$ , X) having very strong peak intensity. And, the full width at half maximum and binding energy of neutral donor bound excition were 8mev and 14.1meV, respectively. By Haynes rule, an activation energy of impurity was 141 meV.ion energy of impurity was 141 meV.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.201-204
• /
• 2008

The Sectional Design Model(AASHTO LRFD) is appropriate for the design of typical bridge girders, slabs, and other regions of components where the assumptions of traditional engineering beam theory are valid. The shear resistance of a concrete member may be separated into a component, $V_c$, that relies on tensile stresses in the concrete, $V_s$, that relies on tensile stresses in the transverse reinforcement. The expressions for $V_c$ and $V_s$ apply to both prestressed and nonprestressed section, with the terms ${\beta}$ and ${\theta}$ depending on the applied loading(M, V, N, and T) and the properties of the section. With ${\beta}$ taken as 2.0 and ${\theta}$ as 45$^{\circ}$, the expressions for shear strength become essentially identical to those traditionally used for evaluating shear resistance. Recent large-scale experiments, however, have demonstrated that these traditional expression can be seriously unconservative for large members not containing transverse reinforcement. And This paper can present only a brief introduction to shear design of AASHTO LRFD and is to review of the technical difficulty.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.9
• /
• pp.79-84
• /
• 2016

In this paper we consider the problem of finding the triplet (S,${\pi}$,f), where $S{\subseteq}V$, ${\pi}$ is a sequence of nodes in S and $f:V{\backslash}S{\rightarrow}S$ for a given complete graph G=(V,E). In particular, there exist two costs, $c^V_{uv}$ and $c^D_{uv}$ for $(u,v){\in}E$, and the cost of triplet (S,${\pi}$,f) is defined as $\sum_{i=1}^{{\mid}S{\mid}}c^V_{{\pi}(i){\pi}(i+1)}+2$ ${\sum_{u{\in}V{\backslash}S}c^D_{uf(u)}$. This problem is motivated by the integrated routing of the vehicle and drone for urban delivery services. Since a well-known NP-complete TSP (Traveling Salesman Problem) is a special case of our problem, we cannot expect to have any polynomial-time algorithm unless P=NP. Furthermore, for practical purposes, we may not rely on time-exhaustive enumeration method such as branch-and-bound and branch-and-cut. This paper suggests the simple heuristic which is motivated by the MST (minimum spanning tree)-based approximation algorithm and neighborhood search heuristic for TSP.