• Journal of the Korean Ceramic Society
• /
• v.19 no.4
• /
• pp.267-274
• /
• 1982

The sintering behavior and B-H loop properties of $Li_{0.5O4}$ with the addition of $Nb_2O_5$ and $V_2O_5$ have been investigated by observation of microstructures and measurement of semi-static hysteresis loops. The sintering temperature was lowered by the additions of $Nb_2O_5$ and $V_2O_5$ and the effect of $V_2O_5$ addition was greater than that of $Nb_2O_5$. The abnormal grain growth was observed at about 100$0^{\circ}C$(d:4.6g/㎤) and 85$0^{\circ}C$(d:4.5g/㎤) in the specimens with the addition of $Nb_2O_5$ and $V_2O_5$ respectively. The addition of $Nb_2O_5$ retulted in a large and uniform grain size, and the addition of $V_2O_5$ resulted in a uniform grain size but the final density was lower than that of the pure specimen. The squareness was increased and the coercive force was decreased by the addition of $Nb_2O_5$, and the squareness was decreased and the coercive force was increased by the addition of $V_2O_5$. These effects could be explained by a large and uniform grain size, and by a lower final density of specimens with the addition of $Nb_2O_5$ and $V_2O_5$ respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.2
• /
• pp.63-67
• /
• 2010

The organic solar cells with Glass/ITO/PEDOT:PSS/P3HT:PCBM/Al structure were fabricated using regioregular poly (3-hexylthiophene) (P3HT) polymer:(6,6)- phenyl $C_{61}$-butyric acid methyl ester (PCBM) fullerene polymer as the bulk hetero-junction layer. The P3HT and PCBM as the electron donor and acceptor materials were spin casted on the indium tin oxide (ITO) coated glass substrates. The optimum mixing concentration ratio of photovoltaic layer was found to be P3HT:PCBM = 4:4 in wt%, indicating that the short circuit current density ($J_{SC}$), open circuit voltage ($V_{OC}$), fill factor (FF) and power conversion efficiency (PCE) values were about 4.7 $mA/cm^2$, 0.48 V, 43.1% and 0.97%, respectively. To investigate the effects of the post annealing treatment, as prepared organic solar cells were post annealed at the treatment time range from 5min to 20min at $150^{\circ}C$. $J_{SC}$ and $V_{OC}$ increased with increasing the post annealing time from 5min to 15min, which may be originated from the improvement of the light absorption coefficient of P3HT and improved ohmic contact between photo voltaic layer and Al electrode. The maximum $J_{SC},\;V_{OC}$, FF and PCE values of organic solar cell, which was post annealed for 15min at $150^{\circ}C$, were found to be about 7.8 $mA/cm^2$, 0.55 V, 47% and 2.0%, respectively.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.77-78
• /
• 2006

최근 flexible OLED의 구동에 사용하기 위한 유기박막트랜지스터(Organic Thin Film Transistor, OTFT)의 연구에서는 용매에 용해되어 spin coating이 가능한 재료의 개발에 관심을 두고 있다. 현재 pentacene으로는 아직 spin coating으로 제작할 수 있는 상용화된 제품이 없고 spin coating이 가능한 활성층 물질(active material)로 P3HT가 쓰이고 있다. 본 연구에서는 용해 가능한 P3HT 활성층 물질과 여러 종류의 용해 가능한 게이트 절연물(gate insulator, Gl)을 사용하여 안정된 소자를 구현할 수 있는 공정을 개발하는 목적으로 metal-insulator-semironductor(MIS) 소자를 제작하여 C-V 특성을 측정하고 분석하였다. 먼저 7mm${\times}$7mm 크기의 pyrex glass 시편 위에 바닥 전극으로 $1600{\AA}$ Au을 증착하고 spin coating 방식을 이용하여 PVP, PVA, PVK, BCB, Pl의 5종류의 게이트 절연층을 각각 형성하였고 그 위에 같은 방법으로 P3HT를 코팅하였다. P3HT 코팅 시 bake 공정의 유무와 spin rpm의 변화에 따른 P3HT의 두께를 측정하였다. Gl의 종류별로 주파수에 따른 capatltancc를 측정하여 비교, 분석하였다. C-V 측정 결과 PVP, PVA, PVK, BCB, Pl의 단위 면적당 capacitance 값은 각각 1.06, 2.73, 2.94, 3.43, $2.78nF/cm^2$로 측정되었다. Threshold voltage, $V_{th}$는 각각 -0.4, -0.7, -1.6, -0.1, -0.2V를 나타냈다. 주파수에 따른 capacitance 변화율을 측정한 결과 Gl 물질 모두 주파수가 높을수록 capacitance가 점점 감소하는 경향을 보였으나 1${\sim}$2nF 이내의 범위에서 작은 변화율만 나타냈다. P3HT의 두께와 bake 온도를 변화시켜 C-V 값을 측정한 결과 차이는 없었다. FE-SEM으로 관찰한 결과에서도 두께나 온도에 따른 P3HT의 표면 morphology 차이를 확인할 수 없었다. 본 연구에서 PVK와 P3HT의 조합이 수율(yield)면에서 가장 안정적이면서 $3.43\;nF/cm^2$의 가장 높은 capacitance 값을 나타내고 $V_{th}$ 값 또한 -1.6V로 가장 낮은 값을 보였다.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.257-260
• /
• 2000

In this paper, a Gm-C filter for low voltage and low power applications using a fully-differential transconductor is presented. The designed transconductor using the series composite transistors and the low voltage composite transistors has wide input range at low supply voltage. A negative resistor load (NRL) technology for high DC gain of the transconductor is employed with a common mode feedback (CMFB). As a design example, the third-order Elliptic lowpass filter is designed. The designed filter is simulated and examined by HSPICE using 0.25${\mu}{\textrm}{m}$ CMOS n-well parameters. The simulation results show 105MHz cutoff frequency and 2.4㎽ power dissipation with a 2.5V supply voltage.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.359-364
• /
• 1996

$SrTiO_3$ thin films were deposited on Pt/Ti/$SiO_2$/Si substrates at low temperatures below $300^{\circ}C$ by r.f. magnetron sputtering. The materials and the electrical properties of the deposited films were investigated with controlling deposition parameters such as substrate temperature(T_s) and positive substrate d.c. bias voltage. Stoichiometric $SrTiO_3$ films were obtained at Ts of $300^{\circ}C$, but Sr content in the film was less than that of a target when Ts was lower than $300^{\circ}C$, resulting in poor electrical properties. By introducing a positive substrate d.c. bias during deposition, the crystallinity and the dielectric properties of the films were markedly improved. 400 nm thick $SrTiO_3$, films deposited at $300^{\circ}C$ with a positive substrate d.c. bias of 20V showed a columnar structure with <211> crystallographic direction and a dielectric constant of 98.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.6
• /
• pp.245-250
• /
• 2007

This study was focused on the effect of sintering additive and particle size on the low temperature sintering of $0.85CaWO_4-0.15SmNbO_4$ ceramics. With an increase of $CaV_2O_6$ content, the sintering temperature of the specimens was reduced from $1150^{\circ}C\;to\;800^{\circ}C$. The dielectric constant (K) and Qf value were increased with $CaV_2O_6$ content. These results are due to the enhancement of the density by the liquid phase sintering. Temperature coefficient of resonant frequency (TCF) was slightly shifted to the positive value with $CaV_2O_6$ content. Typically, K of 12.64, Qf of 23,106 GHz, TCF of $-34ppm/^{\circ}C$ were obtained for the specimens with 7 wt.% $CaV_2O_6$ sintered at $900^{\circ}C$ for 3 h.

• Microbiology and Biotechnology Letters
• /
• v.18 no.4
• /
• pp.376-382
• /
• 1990

An extracellular cellulase producing bacterium YE-5 was isolated from soil, and identified as a Cellulomonas sp. by its taxonomical characteristics. The maximal activities of avicelase (0.35 units/ml), CMCase (3.18 units/ml), FPase (0.315 units/ml) and $\beta$-glucosidase (0.882 units/ml) were obtained when this strain was cultured for 48 hrs at $30^{\circ}C$ in a medium containing 0.8% (w/v) Solka floc, 0.06010 (wlv) urea, 0.1% (w/v) $K_2HP0_4$, 0.1% (w/v) $MgS0_4.7H2_0$, 0.2% (w/v) bacto peptone, 0.2% (w/v) yeast extract and pH 6.5. The cellulase was purified by ammonium sulfate fractionation, DEAE-Sepharose column chromatography and Sephadex 6-100 column chromatography from culture filtrate of Cellulomonus sp. YE-5. The molecular weights of purified avieelase, CMCase I, and CMCase II were estimated to be about 95,000 ~ 105,000, 46,000 ~ 47,000 and 120,000 ~ 125,000, respectively.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.204-212
• /
• 2016

The soils used as trackbed in Korea are selected using USCS utilizing basic soil properties such as Grain Size Distribution(GSD), % passing of #200 sieve ($P_{200}$), % passing of #4 sieve ($P_4$), Coefficient of uniformity ($C_u$), and Coefficient of curvature ($C_c$). Degree of compaction of the soils adapted in the code by KR should be evaluated by maximum dry density (${\gamma}_{d-max}$) and deformation modulus $E_{v2}$. The most important influencing factor that is critical to stability and deformation of the compacted soils used as trackbed is stiffness. Thus, it is necessary to construct a correlation between the modulus and the basic soil properties of trackbed soil in order to redefine a new soil classification system adaptable only to railway construction. To construct the relationship, basic soil test data is collected as a database, including GSD, maximum dry unit weight (${\gamma}_{d-max}$), OMC, $P_{200}$, $P_4$, $C_u$, $C_c$, etc.; deformation modulus $E_{v2}$ and $E_{vd}$ are obtained independently by performing a Repeated Plated Bearing Test (RPBT) and Light Weight Deflectometer Test (LWDT) for ten different railway construction sites. A linear regression analysis is performed using SPSS to obtain the relationship between the basic soil properties and the deformation modulus $E_{v2}$ and $E_v$. Based on the constructed relationship and the various obtained mechanical test data, a new soil classification system will be proposed later as a guideline for the design and construction of trackbed foundation in Korea.

• Food Science and Preservation
• /
• v.11 no.3
• /
• pp.319-324
• /
• 2004

The antimicrobial activity of the extract of citrus peel prepared by the method of hot water, ethanol and sugar was examined. The results showed that the extract of citrus peel prepared by hot water or ethanol did not have antimicrobial activity, but the extract by 10$\%$(w/v) sugar revealed the high antimicrobial activity. Extracted in 10%(w/v) sugar solution for 9 days, showed the highest antimicrobial activity against 8 strains of bacteria. The minimum inhibition concentration was found to be 0.5$\%$(v/v) against S. aureus, 1.5$\%$(v/v) against B. subtilis, M. luteus and E. coli, and 2.0$\%$(v/v) against S. mutans. The antimicrobial activity of the citrus peel extract was stable regardless of the treatment at 40 $\~$ 100 $^{\circ}C$C for 20 min and unstable response to the change of pH. The results suggested the development of citrus peel as heat-stable antimicrobial agents.

• Journal of Aquaculture
• /
• v.17 no.2
• /
• pp.139-143
• /
• 2004

In the fish oil forced oxidized at 6$0^{\circ}C$ for 10 days, changes in the levels of peroxide (POV), anisidine (AnV), total oxidation (Totox), iodine (IV), acid (AV) and fatty acids composition were measured. The levels of POV, AnV and Totox remained unchanged or decreased after reaching the maximum. The concentrations of polyunsaturated fatty acids (PUFA) such as Docosa hexaenoic acid (DHA) or Eicosa pentaenoic acid (EPA) decreased with extended oxidation of fish oil. In saturated fatty acids (SFA) like C16:0, their concentration increased with decreasing PUFA. The ratios of PUFA/SFA and DHA/C16:0 decreased with extended oxidation of fish oil. Using a single parameter of POV, AnV, Totox, AV, IV, or fatty acids for evaluation of the quality of fish oil may prove difficult. Besides other parameters, the ratios of PUFA/SFA and/or DHA/C16:0 could be a good index to evaluate the quality of fish oil.