• Journal of Life Science
• /
• v.28 no.8
• /
• pp.969-976
• /
• 2018

In this study, transglucosidase (TG), an enzyme produced by Aspergillus niger, synthesized isomaltooligosaccharide from ${\alpha}-(1{\rightarrow}4)$ linked substrates. The highest TG-producing A. niger KCTC6913 was selected from six kinds of species, and optimized TG producing conditions were established. Five different carbon sources (potato starch, sweet potato starch, corn starch, wheat starch, and dextrin) and three different nitrogen sources (yeast extract, malt extract, and beef extract) were tested to establish the carbon and nitrogen sources favorable for TG production. Measurements of TG activity after an initial culture at pH 5.0 for 15 days revealed that potato starch and yeast extract, which are basic culture media, resulted in the highest TG activity. In addition, A. niger KCTC6913 increased TG production under aerobic conditions and a controlled carbon/nitrogen ratio. In conclusion, to evaluate TG activity in the established optimal medium, it is confirmed that the basal and potato dextrose broth medium were used as a control, and the highest TG production was measured, which was highlighted in the established optimal medium.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.5
• /
• pp.619-624
• /
• 2011

Tea extract (TE) has been shown to have anti-tumor properties in a wide variety of experimental systems. We evaluated green tea extract (GTE) as a biochemical modulator for the antitumor activity of cisplatin and doxorubicin in the treatment of human lung cancer A549 cells. Cells were grown in RPMI-1640 medium supplemented with 10% (v/v) heat-inactivated fetal bovine serum and two antibiotics (100 units/mL penicillin and $100\;{\mu}g$/mL streptomycin). Two types of TE, epigallocatechin galate (EGCG) and GTE, were used in this experiment. The cells were seeded at $1{\times}10^4$ cells/well in the RPMI-1640 media with or without TE ($100\;{\mu}g$/mL) and then treated with different concentrations of doxorubicin ($0{\sim}14\;{\mu}g$/mL) or cisplatin ($0{\sim}35\;{\mu}g$/mL). After incubation in 5% $CO_2$ at $37^{\circ}C$ for 24 hr, cell viability was determined with a MTT assay. We used a Western blot to detect the influence of EGCG and GTE on the expression of p53 and caspase-3 genes in the A549 cells. A549 cell viability decreased to 15% with a $10\;{\mu}g$/mL concentration of cisplatin, and to 21% with a $8\;{\mu}g$/mL concentration of doxorubicin, as measured with the MTT assay. However, pre-treatment of the cells with EGCG ($100\;{\mu}g$/mL) or GTE ($100\;{\mu}g$/mL) resulted in decreased cell viability with $6\;{\mu}g$/mL of cisplatin and $4\;{\mu}g$/mL of doxorubicin. There was no apparent change in cell viability between EGCG or GTE administration in cisplatin- or doxorubicin-induced cytotoxicity in A549 cells. The levels of p53 and caspase-3 in the A549 cells increased with both EGCG and GTE treatment. We found that GTE could potentially affect cisplatin- or doxorubicin-induced cytotoxicity of A549 cells, which may be useful in the chemotreatment of cancer.

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.472-481
• /
• 2009

Response surface methodology (RSM) is frequently used for optimization studies. In the present work, RSM was used to determine the antimicrobial activitiesof grapefruit seed extract (GFSE) and a lactic acid mixture (LA) against Staphylococcus aureus, Bacillus cereus, Escherichia coli, Salmonella typhimurium, Pseudomonas fluorescens, and Vibrio parahaemolyticus. A central composite design was used to investigate the effects of independent variables on dependent parameters. One set of antimicrobial preparations included mixtures of 1% (w/w) GFSE and 10% (w/w) LA, in which the relative proportions of component antimicrobials varied between 0 and 100%. In further experiments, the relative proportions were between 20% and 100%. Antimicrobial effects against various microorganisms were mathematically encoded for analysis. The codes are given in parentheses after the bacterial names, and were S. aureus ($Y_1$), B. cereus ($Y_2$), E. coli ($Y_3$), S. typhimurium ($Y_4$), P. fluorescens ($Y_5$), and V. parahaemolyticus ($Y_6$). The optimum antimicrobial activity of the 1% (w/w) GFSE:10% (w/w) LA mixture against each microorganism was obtained by superimposing contour plots ofantimicrobial activities on measures of response obtained under various conditions. The optimum rangesfor maximum antimicrobial activity of a mixture with a ratio of 1:10 (by weight) GFSE and LA were 35.73:64.27 and 56.58:43.42 (v/v), and the optimum mixture ratio was 51.70-100%. Under the tested conditions (a ratio of 1% [w/w] GFSE to 10% [w/w] LA of 40:60, and a concentration of 1% [w/w] GFSE and 10% [w/w] LA, 70% of the highest value tested), and within optimum antimicrobial activity ranges, the antimicrobial activities of the 1% (w/w) GFSE:10% (w/w) LA mixture against S. aureus ($Y_1$), B. cereus ($Y_2$), E. coli ($Y_3$), S. typhimurium ($Y_4$), P. fluorescens ($Y_5$), and V. parahaemolyticus ($Y_6$) were 24.55, 25.22, 20.20, 22.49, 23.89, and 28.04 mm, respectively. The predicted values at optimum conditions were similar to experimental values.

• The Korean Journal of Pesticide Science
• /
• v.10 no.2
• /
• pp.124-130
• /
• 2006

Rice plant extracts of brown planthopper (BPH) resistant rice varieties, Jangseongbyeo (JSB) and Hwacheongbyeo (HCB) at different growth stages (seedling, tillering, heading and ripening) were sequentially fractioned using hexane, ethyl ether, ethyl acetate, butanol, and distilled water. The extracts were applied to BPH susceptible rice variety, Dongjjnbyeo (DJB), to investigate the insecticidal and repellent effects against BPH. BPH insecticidal effects were not clearly observed with almost all of the extract fractions obtained from both JSB and HCB varieties for 12 h, whereas the ethyl ether and hexane extract fractions showed about 10 to 30% of BPH mortality in 24 to 48 h of application periods. An effective BPH repellent activity was found with the applications of ethyl ether extract fractions obtained from JSB variety. The extract fractions obtained from HCB variety did not show any different repellence among the various fractions. The BPH repellent effects of the extract fractions obtained at different growth stages of either JSB or HCB varieties did not show any correlations. The effect of ethyl ether fraction on BPH repellent was continually increased by 30 h after treatment and thereafter decreased. In addition, the first sub-fraction separated by a flash column chromatography eluted with chloroform:methanol (9:1, v/v) from the BPH effective ethyl ether faction in JSB variety might be meaningful to repel BPH from BPH susceptible target rice plants. The results indicated that the ethyl ether fraction obtained from JSB was higher in repellent activity than in insecticidal activity, and suggesting that there might be specific substance(s) in the first sub-fraction (sF1) of the ethyl ether fraction in JSB that could provide repellent activity against BPH.

• The Research Journal of the Costume Culture
• /
• v.21 no.5
• /
• pp.699-707
• /
• 2013

The natural dyeing of silk fabric with Thuja orientalis extract was investigated. The proper colorant concentration, dyeing temperature, dyeing time, and pH for the dyeing of silk fabric with Thuja orientalis extract were 100% v/v, $80^{\circ}C$, 80 minutes and pH 3, respectively. In various mordanted methods, the K/S values of mordanted methods were higher than those of unmordanted methods with increasing mordant concentration. Light colorfastness and washing colorfastness of Cu or Fe mordanted silk fabric was improved by mordanting. The antibacterial properties of dyed and mordanted silk fabric showed a high reduction rate, and Thuja orientalis extract was showed effective bacterial reduction. The dyed and mordanted fabric with Thuja orientalis extract showed a superior ultraviolet protection property.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.210-211
• /
• 2008

탄화규소를 이용한 600V급 MOSFET 소자 제작을 위하여 특성 simulation을 수행하였다. 600V 내압을 얻기 위해서 불순물 농도가 1E16/cm3이고 에피층의 두께가 6um인 상용 탄회규소 웨이퍼를 기준으로 하였으며 TRIM simulation을 사용하여 P-body의 retrograde profile을 구하고 이를 이용하여 소자의 전기적 특성을 simulation 하였다. P-body의 표면 농도를 5E16/cm3 에서 1E18/cm3으로 변화시키면서 소자의 전기적 특성을 예측하였으며 실험 결과와 비교하여 특성 변수를 추출하였다.

• Environmental Mutagens and Carcinogens
• /
• v.15 no.2
• /
• pp.106-114
• /
• 1995

A method was developed to detect total mutagenicity of fried fish for S. typhimurium TA98, using Ames assay. Method described herein circumvented problems associated with the sample preparation for Ames assay, i.e., a multi-purification step of sample and interference with solvent residuals. Experiment A, the best method developed in the present study, consisted of two important steps: pH adjustment of the aqueous sample solution from fried fish samples to remove impurities, and simultaneous distillation extraction (SDE) for partially purified samples to remove volatile compounds from solvents. The procedure and results were described as below. Fillet of gizzard shad (Konosirus punctatus) fish sample fried for 10 min each side on the temperature-controlled fry-pan (210$\circ$C) was homogenized in an aqueous acidic solution (pH 2) with a homogenizer, followed by filtration through Celite. The tiltrate (pH 2), removed some impurities by extraction with chloroform:methanol (2:1, v/v) mixture, was adjusted pH to 10 and then centrifuged to remove precipitate. The ethylacetate extract from the tiltrate of pH 10 was rotoevaporated and purified by SDE apparatus for 2 hours. Experiment A revealed significantly higher revertants (1928 per 25 g fried sample) than other Experiment (B, C, or D) tested. Experiment A gave good results in the mutagenicity test of fried fish sample with few purification steps using only 25 g fried sample and 650 ml of solvents; and thus this method could be a useful tool for the screening the mutagenicity or antimutagenicity of other foods as well.

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.421-426
• /
• 2008

In older to prepare functional food materials from Acanthopanax koreanum, changes of major constituents by extracting with water and ethanol were investigated Extracting 300 g of below 0.5 cm size dried sample in 7.5 L of water or $30{\sim}95%$ ethanol for 9 hr at $100^{\circ}C$ were carried out pH during extraction was between 4.0 and 6.5. Color b-value of extracts was increased according to lower ethanol concentration and longer extraction time. Color a-value and b-value was increased more in stem than in root Extracts were increased rapidly within $2{\sim}3\;hr$. The extract in $30{\sim}70%$ ethanol was $0.84{\sim}1.34%(w/v)$ with root Main free sugar of extracts was sucrose in root. The eleutherosides were extracted rapidly within 3 hr, moreover were increased in water or $30{\sim}70%$ ethanol more than 95% ethanol concentration. Extraction of acanthoic acid from root was more affected on ethanol concentration than extracted time, moreover it was detected only trace by extracting with water. Furthermore, acanthoic acid was extracted rapidly within 2 hr in $50{\sim}70%$ ethanol, and was extracted 3 times higher with 70% ethanol than with 30% ethanol. The content of acanthoic acid in residue after extraction was affected largely by extraction solvents. The extraction efficiency in 70, 50 and 35% of ethanol concentration was about 95, 90 and 35% respectively. The eleutherosides were extracted to 95% with water or nature of water and ethanol. Therefore, the reflux extraction in $40{\sim}70%$ ethanol concentration for $3{\sim}5\;hr$ was adequate for extraction of functional materials from Acanthopanax koreanum.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.429-439
• /
• 1999

Potentiometric titration data were collected for some humic acids purified from Korean upland and paddy soils over a range of pH (3.0 - 11.0) with $NaNO_3$ background electrolyte concentrations (0.01, 0.10, 0.50 and 1.00 M). The data were applied to model A and V which included both intrinsic heterogeneity of humic materials and electrostatic interaction influences on binding sites. The elemental analysis were conducted for various type of humic samples. The $E_4/E_6$ ratio proposed negative correlation with the total carboxyl groups ($r^2$= 0.9988). The charge ($cmol_c\;kg^{-1}$) on the humic acids became more negative as the ionic strength increased. In both continuous and batch titrations, the ionic strength effect was greater in Namweon series (pH 6.39) than others at pH 5.00. The effect of ionic strength on surface charge appears to be greater in batch titrations. This could suggest that continuous titrations do not represent an equilibrium state and the effects of electrolyte concentration was not fully realized during the course of titrations. Both models described experimental data obtained from continuous and batch titrations well over a range of ionic strengths. Model A is more simpler than model V but adaptes more fitted parameters. Thus, the observed change in apparent binding constants with surface charge is regarded solely due to electrostatic influences rather than functional group heterogeneity. However, Model V is more mechanistically realistic in a number of discrete ligand binding sites.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.835-841
• /
• 2023

The aim of this study is to evaluate the diagnostic ability of dual-energy computed tomography (DECT) for Composition determination of urinary stones in phantom model. Seventeen cases with urinary stones who underwent DECT were enrolled in the study. The composition of the urinary stones was extracted from the seventeen patients were analyzed with DECT in phantom model with fresh pork. The volume scan method using Dual-energy software was used and the scanned image sets were assessed. All 17 urinary stones of the phantom model were analyzed according to the stone composition using DE stone Analysis were divided into uric acid stones (n=6, 35.29%) and non-uric acid stones (n=11, 64.71%). These urinary stones were pathologically confirmed. The mean attenuation values of uric acid stones at 135 kV, 100 kV and 80 kV was 348.87 ± 166.37 HU, 345.33 ± 151.18 HU and 337.94 ± 172.77 HU, respectively. The mean attenuation values of non-uric acid stones at 135 kV, 100 kV and 80 kV was 551.93 ± 297.09 HU, 747.04 ± 351.31 HU and 958.19 ± 424.72 HU, respectively. At 80 kV, uric acid stones and non-uric acid stones showed significant difference in the attenuation values(P<0.05). The attenuation values of DECT could differentiate the compositions of urinary stones between uric acid and non-uric acid stones at 80 kV in phantom model.