• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.154-157
• /
• 2003

$TiO_2$ thin films were fabricated by RF magnetron sputtering system at by controlling deposition times, ratios of $Ar:O_2$ partial presser ratio and substrate conditions. And the surface, cross-section morphology, microstructure, and composition ratio of the films were analyzed by FE-SEM, TEM and XPS. Besides, the optical absorption and transmittance of the $TiO_2$ films were measured by a UV-VIS-NIR Spectrophotometer, and photocatalytic properties were studied by G${\cdot}$C Analyzer & Data Analysis system. As the result, when $TiO_2$ thin film was made at deposition time of 120[min] and $Ar:O_2$ ratio of 60:40, the best structural and optical properties among many thin films could be accepted. The best results of properties were as follows: thickness; 360~370[nm), grain size; 40[nm], gap between two peak binding energy; $5.8{\pm}0.05[eV]$ ($2_{p3/2}$ peak and $2_{p1/2}$ peak of Ti was show at $458.3{\pm}0.05[eV]$ and $464.1{\pm}0.05[eV]$ respectively), binding energy; $530{\pm}0.05[eV]$, optical energy band gap; 3.4[eV].

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.31-36
• /
• 1983

The photoelectrochemical conversion by polycrystalline $TiO_2$ electrodes is effected by applied voltage oxidized $TiO_2$ thickness temperature and concentration of a, P. E. C cell. Anodic current starts at -0.8V in 1N-NaOH solu-tion and photocurrent appears around 420nm frequency. And the emf of the cell drops with the rate of 58.5mV/PH.

• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.41-44
• /
• 2014

본 연구에서는 $TiO_2$에 나이오븀 (Nb) 도펀트가 주입되었을 때의 활성화 에너지를 홀 효과 측정 시스템과 온도에 따른 photoluminescence (PL) 실험을 통하여 살펴보았다. Nb 이 도핑 된 n형 아나타제 $TiO_2$ 박막은 pulsed laser deposition (PLD) 기법으로 $SrTiO_3$기판에 성장되었다. 측정 결과, Nb 도너의 활성화 에너지 값은 홀 효과 측정에서는 14.52 meV, PL 측정에서는 6.72 meV로 다소 차이를 보였다. 이 결과는 기존의 어셉터 물질의 활성화 에너지들과는 차이를 나타내고 있으며, 향후 본 연구와 같은 shallow 도너 준위의 활성화 에너지 연구에 대한 더 많은 연구가 필요할 것으로 판단된다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 1999년도 추계학술대회 논문집
• /
• pp.235-236
• /
• 1999

보일러와 같은 고정원에서 배출되는 질소산화물을 제거하기 위한 후처리 기술인 선택적촉매환원공정(SCR:Selective Catalytic Reduction)은 안정적이며 탈질효율이 높아 상업적으로 가장 많이 이용되고 있다(Bosch, 1988). 본 연구팀은 가격 및 성능 측면에서 외국산 상업용 촉매와 경쟁할 수 있는 국산 SCR 촉매의 개발을 위하여 국내에서 안료용으로 생산되는 TiO$_2$를 촉매의 담체로 이용, V$_2$O$_{5}$/TiO$_2$ 하니콤 촉매를 제조하여 촉매의 활성 및 특성을 연구 중에 있다(이정빈, 1999).(중략)

• 한국결정성장학회지
• /
• 제4권4호
• /
• pp.378-387
• /
• 1994

선행연구[1] 즉, $Ti0_2/Pb/TiO_2(900{\AA}/900{\AA}/900{\AA}/)$ 3층구조박막으로부터 열확산에 의해 상형성이 가능하였던 $PbTiO_3$ 박막의 특성을 개선하기 위하여 스퍼터링법을 이용하여 Si기판위에 각 요소층의 두께를 $200~300 {\AA}$으로 얇게하고 적층수를 3,5,7,9,11층$(TiO_2/Pb/.../Tio_2)$으로 변화시켜가며 다층구조박막을 형성한 후 이를 RTA 처리하여 $PbTiO_3$ 박막을 제조하였다. 그 결과 $500^{\circ}C$ 이상에서 단일상의 $PbTiO_3$가 형성되었다. 또한 요소층의 두께를 얇게하고 적층수를 늘려서 열처리한 결과 Pb-silicate 및 void 생성이 억제되어 우수한 계면상태를 유지하였으며 조성도 보다 균일해지는 양상을 나타내었다. $PbTiO_3$ 박막의 MiM구조에 C-V 특성으로부터 측정된 유전상수는 열처리 조건에 따른 경향을 나타내지 않았으나 적층수가 많아져 박막의 두께가 증가 할수록 유전상수가 증가하였다. MIS 구조의 $PbTiO_3$ 박막의 I-V 특성 측정 결과 절연파괴강도는 최고 150kV/cm이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.314-314
• /
• 2011

Using first principles calculations, we investigated the interface structure effects on the magnetic properties of the Fe/BaTiO3 system. On the BaO-terminated surface, a Fe monolayer is formed as two Fe atoms are adsorbed on the top sites of Ba and O in the ($1{\times}1$) surface unit and a Fe ML is formed on the TiO2-terminated surface as two Fe atoms are adsorbed on the two O top sites. The magnetic anisotropy energy of Fe was higher on the TiO2?-erminated surface (1.5 eV) than on the BaO-terminated surface (0.5 eV). The decomposed electron density of the states showed that the stronger hybridization of Fe with the TiO2 layer than with the BaO layer is the most important reason for the higher magnetic anisotropy energy.

• 한국대기환경학회지
• /
• 제26권1호
• /
• pp.1-9
• /
• 2010

In this study, the selective catalytic reduction of $NO_x$ with ammonia was carried out in a filter bag support reactor. The experiments were performed by powder type $MnO_x$ and $V_2O_5$/$TiO_2$ catalyst at low temperature between 130 and $250^{\circ}C$. Also, the effect of $SO_2$ and $H_2O$ on the NO conversion was investigated under our test conditions. The powder type catalysts were analyzed by X-ray photoelectron spectrum (XPS), X-ray diffraction(XRD), scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA). It was observed that NO removal efficiency of the powder type $V_2O_5$/$TiO_2$ catalyst was 85% at low temperature($200^{\circ}C$) under presence of oxygen and that of $MnO_x$ was 50% at the same condition. The powder type $V_2O_5$/$TiO_2$ catalyst, in conclusion, was found to be available for SCR reaction in a filter bag support system.

• Environmental Engineering Research
• /
• 제10권1호
• /
• pp.31-37
• /
• 2005

The selective catalytic experiments using both sulfated/sulfur-free titania and V2O5/TiO2 catalysts have been conducted for NO reduction by NH3 in a packed-bed, down-flow reactor. The sulfated and vanadia loaded titania exhibited higher activity for NO removal than the sulfur-free catalysts, where > 90% NO removal was achieved over the sulfated V2O5/TiO2 catalyst between 280∼500 C. The surface structure of vanadia species on the catalyst surface played a critical role in the high performance of catalysts in which the existence of monomeric/polymeric vanadate is revealed by Raman spectra studies. Water vapor and SO2 were added to the reacting system for the catalyst deactivation tests. At higher temperatures (T ≥ 350 C), little deactivation was observed over the sulfated V2O5/TiO2 catalysts, showing good durability against SO2 and water vapor, which is compared with deactivation at lower temperatures.

• 한국자기공명학회논문지
• /
• 제4권1호
• /
• pp.1-11
• /
• 2000

Supported vanadium oxides are being used extensively as catalysts for a variety of reactions, including partial oxidations and ammoxidations. A series of vanadium oxide supported on TiO2-ZrO2 was obtained by impregnating ammonium metavanadate slowly into a mixed precipitateof Ti(OH)4-Zr(OH)4, followed by calcining in air at high temperatures. The prepared catalysts were characterized by 51V solid-state NMR. In the calcined catalysts 51V NMR studies indicated the peaks corresponding to distorted tetrahedral vanadia species at low V2O5 contents and octahedral vanadia species at high vanadia loadings. These results illustrate the suitability of 51V NMR as a unique quantitative spectroscopic tool in the structural analysis of vanadium(V) oxide catalytic materials.

• 한국재료학회지
• /
• 제17권11호
• /
• pp.593-600
• /
• 2007

Aluminum was anodized in a $H_2SO_4$ solution, and titanium (IV) oxide ($TiO_2$) was electrodeposited into nanopores of anodic porous alumina in a mixed solution of $TiOSO_4$ and $(COOH)_2$. The photocatalytic activity of the prepared film was analyzed for photodegradation of methylene blue aqueous solution. Consequently, we found it was possible to electrodeposit $TiO_2$ onto anodic porous alumina, and synthesized it into the nanopores by hydrolysis of a titanium complex ion under AC 8-9 V when film thickness was about $15-20{\mu}m$. The photocatalytic activity of $TiO_2$-loaded anodic porous alumina ($TiO_2/Al_2O_3$) at an impressed voltage of 9 V was the highest in every condition, being about 12 times as high as sol-gel $TiO_2$ on anodic porous alumina. The results revealed that anodic porous alumina is effective as a substrate for photocatalytic film and that high-activity $TiO_2$ film can be prepared at low cost.